From: "Eric Gonçalves" <ghatto404@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Eric Gonçalves" <ghatto404@gmail.com>
Subject: [RESEND PATCH v8 0/1] arm64: dts: qcom: add initial support for Samsung Galaxy S22
Date: Thu, 11 Sep 2025 22:47:28 +0000 [thread overview]
Message-ID: <20250911224734.51415-1-ghatto404@gmail.com> (raw)
Changes in v8:
- Rebase on 'arm64: dts: qcom: sm8450: Flatten usb controller node'
- Use real name for sign-offs
- Remove device tree binding patch as it's already in the tree, merged by
Bjorn
Changes in v7:
- Document the reserved GPIO pins, remove pin 50 as it does not
need to be reserved
- Clarify the phone isn't limited to USB 2.0 but rather USB 3.0
isn't implemented yet
- Add a newline before every 'status' node
Changes in v6:
- Remove debug features (bootargs, etc) that slipped in the v5 DTS
- Format and organize nodes correctly based on existing DTS,
move "status = "okay";" to the bottom always
- Solve "ddr_device_type" and "qcom,rmtfs-mem" warnings, the rest are
from existing SoC .dtsi
- Disable buttons, ufs and other features for later revision
Changes in v5:
- Properly format the thread
Changes in v4:
- Try to properly format the thread
Changes in v3:
- Removed unnecessary initrd start and end addresses
- Make sure r0q is in right order on Makefile
- Properly format memory addresses
- Set r0q to the correct, alphabetical order in documents
Changes in v2:
- Attempt to format the patchset thread correctly
Eric Gonçalves (1):
arm64: dts: qcom: add initial support for Samsung Galaxy S22
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm8450-samsung-r0q.dts | 145 ++++++++++++++++++
2 files changed, 146 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
--
2.50.1
next reply other threads:[~2025-09-11 22:48 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-11 22:47 Eric Gonçalves [this message]
2025-09-11 22:47 ` [RESEND PATCH v8 1/1] arm64: dts: qcom: add initial support for Samsung Galaxy S22 Eric Gonçalves
2025-09-12 1:18 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250911224734.51415-1-ghatto404@gmail.com \
--to=ghatto404@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox