The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: srini@kernel.org
To: gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org,
	Christian Marangi <ansuelsmth@gmail.com>,
	Srinivas Kandagatla <srini@kernel.org>
Subject: [PATCH 5/5] nvmem: an8855: Add support for Airoha AN8855 Switch EFUSE
Date: Fri, 12 Sep 2025 14:14:15 +0100	[thread overview]
Message-ID: <20250912131415.303407-6-srini@kernel.org> (raw)
In-Reply-To: <20250912131415.303407-1-srini@kernel.org>

From: Christian Marangi <ansuelsmth@gmail.com>

Add support for Airoha AN8855 Switch EFUSE. These EFUSE might be used
for calibration data for the internal switch PHYs.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
---
 drivers/nvmem/Kconfig        | 11 ++++++
 drivers/nvmem/Makefile       |  2 ++
 drivers/nvmem/an8855-efuse.c | 68 ++++++++++++++++++++++++++++++++++++
 3 files changed, 81 insertions(+)
 create mode 100644 drivers/nvmem/an8855-efuse.c

diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index f3b8ffa77528..e0d88d3199c1 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -28,6 +28,17 @@ source "drivers/nvmem/layouts/Kconfig"
 
 # Devices
 
+config NVMEM_AN8855_EFUSE
+	tristate "Airoha AN8855 eFuse support"
+	depends on MFD_AIROHA_AN8855 || COMPILE_TEST
+	help
+	  Say y here to enable support for reading eFuses on Airoha AN8855
+	  Switch. These are e.g. used to store factory programmed
+	  calibration data required for the PHY.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called nvmem-an8855-efuse.
+
 config NVMEM_APPLE_EFUSES
 	tristate "Apple eFuse support"
 	depends on ARCH_APPLE || COMPILE_TEST
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 5634945f8196..70a4464dcb1e 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -10,6 +10,8 @@ nvmem_layouts-y			:= layouts.o
 obj-y				+= layouts/
 
 # Devices
+obj-$(CONFIG_NVMEM_AN8855_EFUSE)	+= nvmem-an8855-efuse.o
+nvmem-an8855-efuse-y 			:= an8855-efuse.o
 obj-$(CONFIG_NVMEM_APPLE_EFUSES)	+= nvmem-apple-efuses.o
 nvmem-apple-efuses-y 			:= apple-efuses.o
 obj-$(CONFIG_NVMEM_APPLE_SPMI)		+= apple_nvmem_spmi.o
diff --git a/drivers/nvmem/an8855-efuse.c b/drivers/nvmem/an8855-efuse.c
new file mode 100644
index 000000000000..d1afde6f623f
--- /dev/null
+++ b/drivers/nvmem/an8855-efuse.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Airoha AN8855 Switch EFUSE Driver
+ */
+
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define AN8855_EFUSE_CELL		50
+
+#define AN8855_EFUSE_DATA0		0x1000a500
+#define   AN8855_EFUSE_R50O		GENMASK(30, 24)
+
+static int an8855_efuse_read(void *context, unsigned int offset,
+			     void *val, size_t bytes)
+{
+	struct regmap *regmap = context;
+
+	return regmap_bulk_read(regmap, AN8855_EFUSE_DATA0 + offset,
+				val, bytes / sizeof(u32));
+}
+
+static int an8855_efuse_probe(struct platform_device *pdev)
+{
+	struct nvmem_config an8855_nvmem_config = {
+		.name = "an8855-efuse",
+		.size = AN8855_EFUSE_CELL * sizeof(u32),
+		.stride = sizeof(u32),
+		.word_size = sizeof(u32),
+		.reg_read = an8855_efuse_read,
+	};
+	struct device *dev = &pdev->dev;
+	struct nvmem_device *nvmem;
+	struct regmap *regmap;
+
+	/* Assign NVMEM priv to MFD regmap */
+	regmap = dev_get_regmap(dev->parent, NULL);
+	if (!regmap)
+		return -ENOENT;
+
+	an8855_nvmem_config.priv = regmap;
+	an8855_nvmem_config.dev = dev;
+	nvmem = devm_nvmem_register(dev, &an8855_nvmem_config);
+
+	return PTR_ERR_OR_ZERO(nvmem);
+}
+
+static const struct of_device_id an8855_efuse_of_match[] = {
+	{ .compatible = "airoha,an8855-efuse", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, an8855_efuse_of_match);
+
+static struct platform_driver an8855_efuse_driver = {
+	.probe = an8855_efuse_probe,
+	.driver = {
+		.name = "an8855-efuse",
+		.of_match_table = an8855_efuse_of_match,
+	},
+};
+module_platform_driver(an8855_efuse_driver);
+
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_DESCRIPTION("Driver for AN8855 Switch EFUSE");
+MODULE_LICENSE("GPL");
-- 
2.50.0


      parent reply	other threads:[~2025-09-12 13:14 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-09-12 13:14 [PATCH 0/5] nvmem: patches for 6.18 srini
2025-09-12 13:14 ` [PATCH 1/5] dt-bindings: nvmem: Add the nxp,s32g-ocotp yaml file srini
2025-09-12 13:14 ` [PATCH 2/5] nvmem: s32g-ocotp: Add driver for S32G OCOTP srini
2025-09-12 13:14 ` [PATCH 3/5] dt-bindings: nvmem: sl28cpld: add sa67mcu compatible srini
2025-09-12 13:14 ` [PATCH 4/5] dt-bindings: nvmem: Document support for Airoha AN8855 Switch EFUSE srini
2025-09-12 13:14 ` srini [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250912131415.303407-6-srini@kernel.org \
    --to=srini@kernel.org \
    --cc=ansuelsmth@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox