[PATCH net-next 3/8] dt-bindings: net: ethernet-controller: remove the enum values of speed

[Wei Fang <wei.fang@nxp.com>]

Some fixed-link devices have uncommon link speeds. For example, the CPU
port of NXP NETC switch is connected to an ENETC (Ethernet Controller),
they are fully integrated into the NETC IP and connected through the
'pseudo link'. The link speed varies depending on the NETC version. For
example, the speed of NETC v4.3 is 2680 Mbps, other versions may be 8
Gbps or 12.5 Gbps or other speeds. There is no need and pointless to add
these values to ethernet-controller.yaml. Therefore, remove these enum
values so that when performing dtbs_check, no warnings are reported for
the uncommon values.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
 Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 1bafd687dcb1..7fa02d58c208 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -177,7 +177,6 @@ properties:
             description:
               Link speed.
             $ref: /schemas/types.yaml#/definitions/uint32
-            enum: [10, 100, 1000, 2500, 5000, 10000]
 
           full-duplex:
             $ref: /schemas/types.yaml#/definitions/flag
-- 
2.34.1