From: Cezar Chiru <chiru.cezar.89@gmail.com>
To: andi.shyti@kernel.org, wsa+renesas@sang-engineering.com
Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org,
Cezar Chiru <chiru.cezar.89@gmail.com>
Subject: [PATCH v7 2/3] i2c: pcf8584: Fix do not use assignment inside if conditional
Date: Sat, 18 Oct 2025 12:12:57 +0300 [thread overview]
Message-ID: <20251018091258.5266-3-chiru.cezar.89@gmail.com> (raw)
In-Reply-To: <20251018091258.5266-1-chiru.cezar.89@gmail.com>
Assign inside of 'if' conditional is not allowed. Move assignment from
inside 'if' conditional, to one line before each 'if'conditional statement
that caused errors.
Enforce errors fixing based on checkpatch.pl output on file.
Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
---
drivers/i2c/algos/i2c-algo-pcf.c | 28 +++++++++++++++-------------
1 file changed, 15 insertions(+), 13 deletions(-)
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 7e2d8ff33d75..41a81d37e880 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -129,7 +129,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status)
*
* vdovikin: added detect code for PCF8584
*/
-static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
+static int pcf_init_8584(struct i2c_algo_pcf_data *adap)
{
unsigned char temp;
@@ -139,38 +139,38 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
* check to see S1 now used as R/W ctrl -
* PCF8584 does that when ESO is zero
*/
- if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
+ temp = get_pcf(adap, 1);
+ if ((temp & 0x7f) != 0)
return -ENXIO; /* definitely not PCF8584 */
- }
/* load own address in S0, effective address is (own << 1) */
i2c_outb(adap, get_own(adap));
/* check it's really written */
- if ((temp = i2c_inb(adap)) != get_own(adap)) {
+ temp = i2c_inb(adap);
+ if (temp != get_own(adap))
return -ENXIO;
- }
/* S1=0xA0, next byte in S2 */
set_pcf(adap, 1, I2C_PCF_PIN | I2C_PCF_ES1);
/* check to see S2 now selected */
- if (((temp = get_pcf(adap, 1)) & 0x7f) != I2C_PCF_ES1) {
+ temp = get_pcf(adap, 1);
+ if ((temp & 0x7f) != I2C_PCF_ES1)
return -ENXIO;
- }
/* load clock register S2 */
i2c_outb(adap, get_clock(adap));
/* check it's really written, the only 5 lowest bits does matter */
- if (((temp = i2c_inb(adap)) & 0x1f) != get_clock(adap)) {
+ temp = i2c_inb(adap);
+ if ((temp & 0x1f) != get_clock(adap))
return -ENXIO;
- }
/* Enable serial interface, idle, S0 selected */
set_pcf(adap, 1, I2C_PCF_IDLE);
/* check to see PCF is really idled and we can access status register */
- if ((temp = get_pcf(adap, 1)) != (I2C_PCF_PIN | I2C_PCF_BB)) {
+ temp = get_pcf(adap, 1);
+ if (temp != (I2C_PCF_PIN | I2C_PCF_BB))
return -ENXIO;
- }
printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
@@ -218,7 +218,8 @@ static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
/* increment number of bytes to read by one -- read dummy byte */
for (i = 0; i <= count; i++) {
- if ((wfp = wait_for_pin(adap, &status))) {
+ wfp = wait_for_pin(adap, &status);
+ if (wfp) {
if (wfp == -EINTR)
return -EINTR; /* arbitration lost */
@@ -351,7 +352,8 @@ int i2c_pcf_add_bus(struct i2c_adapter *adap)
/* register new adapter to i2c module... */
adap->algo = &pcf_algo;
- if ((rval = pcf_init_8584(pcf_adap)))
+ rval = pcf_init_8584(pcf_adap);
+ if (rval)
return rval;
rval = i2c_add_adapter(adap);
--
2.43.0
next prev parent reply other threads:[~2025-10-18 9:14 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-18 9:12 [PATCH v7 0/3] i2c: pcf8584: Fix errors and warnings reported by checkpatch Cezar Chiru
2025-10-18 9:12 ` [PATCH v7 1/3] i2c: pcf8584: Remove debug macros from i2c-algo-pcf.c Cezar Chiru
2025-10-18 9:12 ` Cezar Chiru [this message]
2025-10-18 9:12 ` [PATCH v7 3/3] i2c: pcf8584: Move 'ret' variable inside for loop, break if ret < 0 Cezar Chiru
2025-10-18 18:00 ` Markus Elfring
2025-10-19 22:03 ` Andi Shyti
2025-10-19 22:07 ` [PATCH v7 0/3] i2c: pcf8584: Fix errors and warnings reported by checkpatch Andi Shyti
2025-10-19 22:10 ` Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251018091258.5266-3-chiru.cezar.89@gmail.com \
--to=chiru.cezar.89@gmail.com \
--cc=andi.shyti@kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox