From: Alex Elder <elder@riscstar.com>
To: han.xu@nxp.com, broonie@kernel.org, dlan@gentoo.org
Cc: guodong@riscstar.com, linux-spi@vger.kernel.org,
imx@lists.linux.dev, spacemit@lists.linux.dev,
linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 6/8] spi: fsl-qspi: support the SpacemiT K1 SoC
Date: Mon, 20 Oct 2025 11:51:49 -0500 [thread overview]
Message-ID: <20251020165152.666221-7-elder@riscstar.com> (raw)
In-Reply-To: <20251020165152.666221-1-elder@riscstar.com>
Allow the SPI_FSL_QUADSPI Kconfig option to be selected if
ARCH_SPACEMIT enabled.
Add support for the SpacemiT K1 SoC in the Freescale QSPI driver
by defining the device type data for its QSPI implementation.
Signed-off-by: Alex Elder <elder@riscstar.com>
---
drivers/spi/Kconfig | 3 ++-
drivers/spi/spi-fsl-qspi.c | 10 ++++++++++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 4d8f00c850c14..2e3d8bd06ceb2 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -435,7 +435,8 @@ config SPI_FSL_LPSPI
config SPI_FSL_QUADSPI
tristate "Freescale QSPI controller"
- depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
+ depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || \
+ ARCH_SPACEMIT || COMPILE_TEST
depends on HAS_IOMEM
help
This enables support for the Quad SPI controller in master mode.
diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c
index 9ecb756b33dba..f4f9cf127d3fe 100644
--- a/drivers/spi/spi-fsl-qspi.c
+++ b/drivers/spi/spi-fsl-qspi.c
@@ -267,6 +267,15 @@ static const struct fsl_qspi_devtype_data ls2080a_data = {
.little_endian = true,
};
+static const struct fsl_qspi_devtype_data spacemit_k1_data = {
+ .rxfifo = SZ_128,
+ .txfifo = SZ_256,
+ .ahb_buf_size = SZ_512,
+ .invalid_mstrid = QUADSPI_BUFXCR_INVALID_MSTRID,
+ .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_NO_CLK_DISABLE,
+ .little_endian = true,
+};
+
struct fsl_qspi {
void __iomem *iobase;
void __iomem *ahb_addr;
@@ -998,6 +1007,7 @@ static const struct of_device_id fsl_qspi_dt_ids[] = {
{ .compatible = "fsl,imx6ul-qspi", .data = &imx6ul_data, },
{ .compatible = "fsl,ls1021a-qspi", .data = &ls1021a_data, },
{ .compatible = "fsl,ls2080a-qspi", .data = &ls2080a_data, },
+ { .compatible = "spacemit,k1-qspi", .data = &spacemit_k1_data, },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids);
--
2.48.1
next prev parent reply other threads:[~2025-10-20 16:52 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-20 16:51 [PATCH 0/8] spi: enable the SpacemiT K1 SoC QSPI Alex Elder
2025-10-20 16:51 ` [PATCH 1/8] dt-bindings: spi: fsl-qspi: add optional resets Alex Elder
2025-10-20 17:44 ` Conor Dooley
2025-10-20 18:06 ` Alex Elder
2025-10-20 16:51 ` [PATCH 2/8] dt-bindings: spi: fsl-qspi: support SpacemiT K1 Alex Elder
2025-10-20 17:39 ` Conor Dooley
2025-10-20 18:06 ` Alex Elder
2025-10-20 18:26 ` Mark Brown
2025-10-20 18:37 ` Alex Elder
2025-10-20 18:39 ` Conor Dooley
2025-10-22 4:34 ` Alex Elder
2025-10-20 17:41 ` Conor Dooley
2025-10-20 18:06 ` Alex Elder
2025-10-20 18:41 ` Conor Dooley
2025-10-20 16:51 ` [PATCH 3/8] spi: fsl-qspi: add optional reset support Alex Elder
2025-10-20 19:07 ` Frank Li
2025-10-22 4:34 ` Alex Elder
2025-10-20 16:51 ` [PATCH 4/8] spi: fsl-qspi: add a clock disable quirk Alex Elder
2025-10-20 19:13 ` Frank Li
2025-10-22 4:34 ` Alex Elder
2025-10-20 16:51 ` [PATCH 5/8] spi: fsl-qspi: allot 1KB per chip Alex Elder
2025-10-20 19:20 ` Frank Li
2025-10-22 4:34 ` Alex Elder
2025-10-20 16:51 ` Alex Elder [this message]
2025-10-20 19:23 ` [PATCH 6/8] spi: fsl-qspi: support the SpacemiT K1 SoC Frank Li
2025-10-22 4:34 ` Alex Elder
2025-10-20 16:51 ` [PATCH 7/8] riscv: dts: spacemit: enable K1 SoC QSPI on BPI-F3 Alex Elder
2025-10-20 16:51 ` [PATCH 8/8] riscv: defconfig: enable SPI_FSL_QUADSPI as a module Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251020165152.666221-7-elder@riscstar.com \
--to=elder@riscstar.com \
--cc=broonie@kernel.org \
--cc=dlan@gentoo.org \
--cc=guodong@riscstar.com \
--cc=han.xu@nxp.com \
--cc=imx@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=linux-spi@vger.kernel.org \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox