[PATCH v9 1/3] i2c: pcf8584: Move 'ret' variable inside for loop, goto out if ret < 0.

[Cezar Chiru <chiru.cezar.89@gmail.com>]

Require spaces around '=' and '<'. Add spaces around binary operators.
Enforce error fixing based on checkpatch.pl output on file.
Move 'ret' variable inside for loop. Then check if (ret < 0) goto out. This
improves usage of ret variable.

Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
---
 drivers/i2c/algos/i2c-algo-pcf.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 41a81d37e880..06b9fd355bff 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -183,7 +183,7 @@ static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf,
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
 	int wrcount, status, timeout;

-	for (wrcount=0; wrcount<count; ++wrcount) {
+	for (wrcount = 0; wrcount < count; ++wrcount) {
 		i2c_outb(adap, buf[wrcount]);
 		timeout = wait_for_pin(adap, &status);
 		if (timeout) {
@@ -272,7 +272,7 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
 	struct i2c_msg *pmsg;
 	int i;
-	int ret=0, timeout, status;
+	int timeout, status;

 	if (adap->xfer_begin)
 		adap->xfer_begin(adap->data);
@@ -284,9 +284,10 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 		goto out;
 	}

-	for (i = 0;ret >= 0 && i < num; i++) {
-		pmsg = &msgs[i];
+	for (i = 0; i < num; i++) {
+		int ret;

+		pmsg = &msgs[i];
 		ret = pcf_doAddress(adap, pmsg);

 		/* Send START */
@@ -321,6 +322,9 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
 			ret = pcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
 					    (i + 1 == num));
 		}
+
+		if (ret < 0)
+			goto out;
 	}

 out:
--
2.43.0