The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: Lorenzo Bianconi <lorenzo@kernel.org>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Christian Marangi <ansuelsmth@gmail.com>
Subject: [net-next PATCH v2 2/2] net: airoha: add phylink support for GDM1
Date: Thu, 23 Oct 2025 16:58:49 +0200	[thread overview]
Message-ID: <20251023145850.28459-3-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20251023145850.28459-1-ansuelsmth@gmail.com>

In preparation for support of GDM2+ port, fill in phylink OPs for GDM1
that is an INTERNAL port for the Embedded Switch.

Add all the phylink start/stop and fill in the MAC capabilities and the
internal interface as the supported interface.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 drivers/net/ethernet/airoha/Kconfig      |  1 +
 drivers/net/ethernet/airoha/airoha_eth.c | 77 +++++++++++++++++++++++-
 drivers/net/ethernet/airoha/airoha_eth.h |  3 +
 3 files changed, 80 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/airoha/Kconfig b/drivers/net/ethernet/airoha/Kconfig
index ad3ce501e7a5..3c74438bc8a0 100644
--- a/drivers/net/ethernet/airoha/Kconfig
+++ b/drivers/net/ethernet/airoha/Kconfig
@@ -2,6 +2,7 @@
 config NET_VENDOR_AIROHA
 	bool "Airoha devices"
 	depends on ARCH_AIROHA || COMPILE_TEST
+	select PHYLIB
 	help
 	  If you have a Airoha SoC with ethernet, say Y.
 
diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c
index ce6d13b10e27..deba909104bb 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.c
+++ b/drivers/net/ethernet/airoha/airoha_eth.c
@@ -1613,6 +1613,8 @@ static int airoha_dev_open(struct net_device *dev)
 	struct airoha_gdm_port *port = netdev_priv(dev);
 	struct airoha_qdma *qdma = port->qdma;
 
+	phylink_start(port->phylink);
+
 	netif_tx_start_all_queues(dev);
 	err = airoha_set_vip_for_gdm_port(port, true);
 	if (err)
@@ -1665,6 +1667,8 @@ static int airoha_dev_stop(struct net_device *dev)
 		}
 	}
 
+	phylink_stop(port->phylink);
+
 	return 0;
 }
 
@@ -2813,6 +2817,18 @@ static const struct ethtool_ops airoha_ethtool_ops = {
 	.get_link		= ethtool_op_get_link,
 };
 
+static struct phylink_pcs *airoha_phylink_mac_select_pcs(struct phylink_config *config,
+							 phy_interface_t interface)
+{
+	return NULL;
+}
+
+static void airoha_mac_config(struct phylink_config *config,
+			      unsigned int mode,
+			      const struct phylink_link_state *state)
+{
+}
+
 static int airoha_metadata_dst_alloc(struct airoha_gdm_port *port)
 {
 	int i;
@@ -2857,6 +2873,57 @@ bool airoha_is_valid_gdm_port(struct airoha_eth *eth,
 	return false;
 }
 
+static void airoha_mac_link_up(struct phylink_config *config,
+			       struct phy_device *phy, unsigned int mode,
+			       phy_interface_t interface, int speed,
+			       int duplex, bool tx_pause, bool rx_pause)
+{
+}
+
+static void airoha_mac_link_down(struct phylink_config *config,
+				 unsigned int mode, phy_interface_t interface)
+{
+}
+
+static const struct phylink_mac_ops airoha_phylink_ops = {
+	.mac_select_pcs = airoha_phylink_mac_select_pcs,
+	.mac_config = airoha_mac_config,
+	.mac_link_up = airoha_mac_link_up,
+	.mac_link_down = airoha_mac_link_down,
+};
+
+static int airoha_setup_phylink(struct net_device *netdev)
+{
+	struct airoha_gdm_port *port = netdev_priv(netdev);
+	struct device *dev = &netdev->dev;
+	struct phylink *phylink;
+	int phy_mode;
+
+	phy_mode = device_get_phy_mode(dev);
+	if (phy_mode < 0) {
+		dev_err(dev, "incorrect phy-mode\n");
+		return phy_mode;
+	}
+
+	port->phylink_config.dev = dev;
+	port->phylink_config.type = PHYLINK_NETDEV;
+	port->phylink_config.mac_capabilities = MAC_ASYM_PAUSE |
+						MAC_SYM_PAUSE |
+						MAC_10000FD;
+
+	__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+		  port->phylink_config.supported_interfaces);
+
+	phylink = phylink_create(&port->phylink_config, dev_fwnode(dev),
+				 phy_mode, &airoha_phylink_ops);
+	if (IS_ERR(phylink))
+		return PTR_ERR(phylink);
+
+	port->phylink = phylink;
+
+	return 0;
+}
+
 static int airoha_alloc_gdm_port(struct airoha_eth *eth,
 				 struct device_node *np, int index)
 {
@@ -2935,12 +3002,18 @@ static int airoha_alloc_gdm_port(struct airoha_eth *eth,
 	if (err)
 		return err;
 
-	err = register_netdev(dev);
+	err = airoha_setup_phylink(port->dev);
 	if (err)
 		goto free_metadata_dst;
 
+	err = register_netdev(dev);
+	if (err)
+		goto free_phylink;
+
 	return 0;
 
+free_phylink:
+	phylink_destroy(port->phylink);
 free_metadata_dst:
 	airoha_metadata_dst_free(port);
 	return err;
@@ -3049,6 +3122,7 @@ static int airoha_probe(struct platform_device *pdev)
 
 		if (port && port->dev->reg_state == NETREG_REGISTERED) {
 			unregister_netdev(port->dev);
+			phylink_destroy(port->phylink);
 			airoha_metadata_dst_free(port);
 		}
 	}
@@ -3076,6 +3150,7 @@ static void airoha_remove(struct platform_device *pdev)
 
 		airoha_dev_stop(port->dev);
 		unregister_netdev(port->dev);
+		phylink_destroy(port->phylink);
 		airoha_metadata_dst_free(port);
 	}
 	free_netdev(eth->napi_dev);
diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h
index eb27a4ff5198..c144c1ece23b 100644
--- a/drivers/net/ethernet/airoha/airoha_eth.h
+++ b/drivers/net/ethernet/airoha/airoha_eth.h
@@ -531,6 +531,9 @@ struct airoha_gdm_port {
 	struct net_device *dev;
 	int id;
 
+	struct phylink *phylink;
+	struct phylink_config phylink_config;
+
 	struct airoha_hw_stats stats;
 
 	DECLARE_BITMAP(qos_sq_bmap, AIROHA_NUM_QOS_CHANNELS);
-- 
2.51.0


  parent reply	other threads:[~2025-10-23 14:59 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-10-23 14:58 [net-next PATCH v2 0/2] net: airoha: initial phylink support Christian Marangi
2025-10-23 14:58 ` [net-next PATCH v2 1/2] net: airoha: use device_set_node helper to setup GDM node Christian Marangi
2025-10-23 14:58 ` Christian Marangi [this message]
2025-10-23 15:11   ` [net-next PATCH v2 2/2] net: airoha: add phylink support for GDM1 Lorenzo Bianconi
2025-10-25 20:36   ` Russell King (Oracle)
2025-10-30 10:35     ` Christian Marangi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251023145850.28459-3-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux@armlinux.org.uk \
    --cc=lorenzo@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox