From: Terry Bowman <terry.bowman@amd.com>
To: <dave@stgolabs.net>, <jonathan.cameron@huawei.com>,
<dave.jiang@intel.com>, <alison.schofield@intel.com>,
<dan.j.williams@intel.com>, <bhelgaas@google.com>,
<shiju.jose@huawei.com>, <ming.li@zohomail.com>,
<Smita.KoralahalliChannabasappa@amd.com>, <rrichter@amd.com>,
<dan.carpenter@linaro.org>, <PradeepVineshReddy.Kodamati@amd.com>,
<lukas@wunner.de>, <Benjamin.Cheatham@amd.com>,
<sathyanarayanan.kuppuswamy@linux.intel.com>,
<linux-cxl@vger.kernel.org>, <alucerop@amd.com>,
<ira.weiny@intel.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-pci@vger.kernel.org>,
<terry.bowman@amd.com>
Subject: [PATCH v13 14/25] cxl/pci: Map CXL Endpoint Port and CXL Switch Port RAS registers
Date: Mon, 3 Nov 2025 18:09:50 -0600 [thread overview]
Message-ID: <20251104001001.3833651-15-terry.bowman@amd.com> (raw)
In-Reply-To: <20251104001001.3833651-1-terry.bowman@amd.com>
CXL Endpoint (EP) Ports may include Root Ports (RP) or Downstream Switch
Ports (DSP). CXL RPs and DSPs contain RAS registers that require memory
mapping to enable RAS logging. This initialization is currently missing and
must be added for CXL RPs and DSPs.
Update cxl_dport_init_ras_reporting() to support RP and DSP RAS mapping.
Add alongside the existing Restricted CXL Host Downstream Port RAS mapping.
Update cxl_endpoint_port_probe() to invoke cxl_dport_init_ras_reporting().
This will initiate the RAS mapping for CXL RPs and DSPs when each CXL EP is
created and added to the EP port.
Make a call to cxl_port_setup_regs() in cxl_port_add(). This will probe the
Upstream Port's CXL capabilities' physical location to be used in mapping
the RAS registers.
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
---
Changes in v12->v13:
- Change as result of dport delay fix. No longer need switchport and
endport approach. (Terry)
Changes in v11->v12:
- Add check for dport_parent->rch before calling cxl_dport_init_ras_reporting().
RCH dports are initialized from cxl_dport_init_ras_reporting cxl_mem_probe().
Changes in v10->v11:
- Use local pointer for readability in cxl_switch_port_init_ras() (Jonathan Cameron)
- Rename port to be ep in cxl_endpoint_port_init_ras() (Dave Jiang)
- Rename dport to be parent_dport in cxl_endpoint_port_init_ras()
and cxl_switch_port_init_ras() (Dave Jiang)
- Port helper changes were in cxl/port.c, now in core/ras.c (Dave Jiang)
---
drivers/cxl/core/port.c | 4 ++++
drivers/cxl/core/ras.c | 12 ++++++++++++
drivers/cxl/cxl.h | 2 ++
drivers/cxl/cxlpci.h | 4 ++++
drivers/cxl/mem.c | 3 ++-
5 files changed, 24 insertions(+), 1 deletion(-)
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 8128fd2b5b31..48f6a1492544 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -1194,6 +1194,8 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
return ERR_PTR(rc);
}
port->component_reg_phys = CXL_RESOURCE_NONE;
+ if (!is_cxl_endpoint(port) && dev_is_pci(port->uport_dev))
+ cxl_uport_init_ras_reporting(port, &port->dev);
}
get_device(dport_dev);
@@ -1623,6 +1625,8 @@ static struct cxl_dport *cxl_port_add_dport(struct cxl_port *port,
cxl_switch_parse_cdat(new_dport);
+ cxl_dport_init_ras_reporting(new_dport, &port->dev);
+
if (ida_is_empty(&port->decoder_ida)) {
rc = devm_cxl_switch_port_decoders_setup(port);
if (rc)
diff --git a/drivers/cxl/core/ras.c b/drivers/cxl/core/ras.c
index 246dfe56617a..19d9ffe885bf 100644
--- a/drivers/cxl/core/ras.c
+++ b/drivers/cxl/core/ras.c
@@ -162,6 +162,18 @@ void cxl_dport_init_ras_reporting(struct cxl_dport *dport, struct device *host)
}
EXPORT_SYMBOL_NS_GPL(cxl_dport_init_ras_reporting, "CXL");
+void cxl_uport_init_ras_reporting(struct cxl_port *port,
+ struct device *host)
+{
+ struct cxl_register_map *map = &port->reg_map;
+
+ map->host = host;
+ if (cxl_map_component_regs(map, &port->uport_regs,
+ BIT(CXL_CM_CAP_CAP_ID_RAS)))
+ dev_dbg(&port->dev, "Failed to map RAS capability\n");
+}
+EXPORT_SYMBOL_NS_GPL(cxl_uport_init_ras_reporting, "CXL");
+
void cxl_handle_cor_ras(struct device *dev, u64 serial, void __iomem *ras_base)
{
void __iomem *addr;
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 259ed4b676e1..b7654d40dc9e 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -599,6 +599,7 @@ struct cxl_dax_region {
* @parent_dport: dport that points to this port in the parent
* @decoder_ida: allocator for decoder ids
* @reg_map: component and ras register mapping parameters
+ * @uport_regs: mapped component registers
* @nr_dports: number of entries in @dports
* @hdm_end: track last allocated HDM decoder instance for allocation ordering
* @commit_end: cursor to track highest committed decoder for commit ordering
@@ -620,6 +621,7 @@ struct cxl_port {
struct cxl_dport *parent_dport;
struct ida decoder_ida;
struct cxl_register_map reg_map;
+ struct cxl_component_regs uport_regs;
int nr_dports;
int hdm_end;
int commit_end;
diff --git a/drivers/cxl/cxlpci.h b/drivers/cxl/cxlpci.h
index 0c8b6ee7b6de..a0a491e7b5b9 100644
--- a/drivers/cxl/cxlpci.h
+++ b/drivers/cxl/cxlpci.h
@@ -83,6 +83,8 @@ void cxl_cor_error_detected(struct pci_dev *pdev);
pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
pci_channel_state_t state);
void cxl_dport_init_ras_reporting(struct cxl_dport *dport, struct device *host);
+void cxl_uport_init_ras_reporting(struct cxl_port *port,
+ struct device *host);
#else
static inline void cxl_cor_error_detected(struct pci_dev *pdev) { }
@@ -94,6 +96,8 @@ static inline pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
static inline void cxl_dport_init_ras_reporting(struct cxl_dport *dport,
struct device *host) { }
+static inline void cxl_uport_init_ras_reporting(struct cxl_port *port,
+ struct device *host) { }
#endif
#endif /* __CXL_PCI_H__ */
diff --git a/drivers/cxl/mem.c b/drivers/cxl/mem.c
index 6e6777b7bafb..d2155f45240d 100644
--- a/drivers/cxl/mem.c
+++ b/drivers/cxl/mem.c
@@ -166,7 +166,8 @@ static int cxl_mem_probe(struct device *dev)
else
endpoint_parent = &parent_port->dev;
- cxl_dport_init_ras_reporting(dport, dev);
+ if (dport->rch)
+ cxl_dport_init_ras_reporting(dport, dev);
scoped_guard(device, endpoint_parent) {
if (!endpoint_parent->driver) {
--
2.34.1
next prev parent reply other threads:[~2025-11-04 0:12 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-04 0:09 [PATCH v13 00/25] Enable CXL PCIe Port Protocol Error handling and logging Terry Bowman
2025-11-04 0:09 ` [PATCH v13 01/25] CXL/PCI: Move CXL DVSEC definitions into uapi/linux/pci_regs.h Terry Bowman
2025-12-06 0:31 ` Bjorn Helgaas
2025-12-06 0:41 ` dan.j.williams
2025-12-06 1:56 ` Bjorn Helgaas
2025-12-06 4:56 ` dan.j.williams
2025-11-04 0:09 ` [PATCH v13 02/25] PCI/CXL: Introduce pcie_is_cxl() Terry Bowman
2025-12-06 0:45 ` Bjorn Helgaas
2025-12-08 15:26 ` Bowman, Terry
2025-12-08 18:33 ` Bjorn Helgaas
2025-11-04 0:09 ` [PATCH v13 03/25] cxl/pci: Remove unnecessary CXL Endpoint handling helper functions Terry Bowman
2025-11-04 0:09 ` [PATCH v13 04/25] cxl/pci: Remove unnecessary CXL RCH " Terry Bowman
2025-11-04 0:09 ` [PATCH v13 05/25] cxl: Remove CXL VH handling in CONFIG_PCIEAER_CXL conditional blocks from core/pci.c Terry Bowman
2025-11-04 0:09 ` [PATCH v13 06/25] cxl: Move CXL driver's RCH error handling into core/ras_rch.c Terry Bowman
2025-11-04 0:09 ` [PATCH v13 07/25] CXL/AER: Replace device_lock() in cxl_rch_handle_error_iter() with guard() lock Terry Bowman
2025-12-08 18:05 ` Bjorn Helgaas
2025-11-04 0:09 ` [PATCH v13 08/25] CXL/AER: Move AER drivers RCH error handling into pcie/aer_cxl_rch.c Terry Bowman
2025-12-08 18:06 ` Bjorn Helgaas
2025-12-08 21:28 ` Bowman, Terry
2025-12-10 21:57 ` Bowman, Terry
2025-12-10 23:12 ` Bjorn Helgaas
2025-11-04 0:09 ` [PATCH v13 09/25] PCI/AER: Report CXL or PCIe bus error type in trace logging Terry Bowman
2025-11-04 0:09 ` [PATCH v13 10/25] cxl/pci: Update RAS handler interfaces to also support CXL Ports Terry Bowman
2025-11-04 0:09 ` [PATCH v13 11/25] cxl/pci: Log message if RAS registers are unmapped Terry Bowman
2025-11-04 0:09 ` [PATCH v13 12/25] cxl/pci: Unify CXL trace logging for CXL Endpoints and CXL Ports Terry Bowman
2025-11-04 0:09 ` [PATCH v13 13/25] cxl/pci: Update cxl_handle_cor_ras() to return early if no RAS errors Terry Bowman
2025-11-04 0:09 ` Terry Bowman [this message]
2025-11-04 0:09 ` [PATCH v13 15/25] CXL/PCI: Introduce PCI_ERS_RESULT_PANIC Terry Bowman
2025-11-04 0:09 ` [PATCH v13 16/25] CXL/AER: Introduce pcie/aer_cxl_vh.c in AER driver for forwarding CXL errors Terry Bowman
2025-12-08 18:36 ` Bjorn Helgaas
2025-11-04 0:09 ` [PATCH v13 17/25] cxl: Introduce cxl_pci_drv_bound() to check for bound driver Terry Bowman
2025-11-04 0:09 ` [PATCH v13 18/25] cxl: Change CXL handlers to use guard() instead of scoped_guard() Terry Bowman
2025-11-04 0:09 ` [PATCH v13 19/25] cxl/pci: Introduce CXL protocol error handlers for Endpoints Terry Bowman
2025-11-04 0:09 ` [PATCH v13 20/25] CXL/PCI: Introduce CXL Port protocol error handlers Terry Bowman
2025-12-08 18:37 ` Bjorn Helgaas
2025-12-09 15:17 ` Bowman, Terry
2025-11-04 0:09 ` [PATCH v13 21/25] PCI/AER: Dequeue forwarded CXL error Terry Bowman
2025-11-04 0:09 ` [PATCH v13 22/25] CXL/PCI: Export and rename merge_result() to pci_ers_merge_result() Terry Bowman
2025-12-08 18:38 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251104001001.3833651-15-terry.bowman@amd.com \
--to=terry.bowman@amd.com \
--cc=Benjamin.Cheatham@amd.com \
--cc=PradeepVineshReddy.Kodamati@amd.com \
--cc=Smita.KoralahalliChannabasappa@amd.com \
--cc=alison.schofield@intel.com \
--cc=alucerop@amd.com \
--cc=bhelgaas@google.com \
--cc=dan.carpenter@linaro.org \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=ming.li@zohomail.com \
--cc=rrichter@amd.com \
--cc=sathyanarayanan.kuppuswamy@linux.intel.com \
--cc=shiju.jose@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox