[PATCH v5 7/8] net: stmmac: qcom-ethqos: define a callback for setting the serdes speed

[Bartosz Golaszewski <brgl@bgdev.pl>]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Ahead of adding support for firmware driven power management, let's
allow different ways of setting the PHY speed. To that end create a
callback with a single implementation for now, that will be extended
later.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 09f122062dec87aa11804af2769ddff4964e6596..446f06b591a0b70992c7a431b56cf88c1b6718fd 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -120,6 +120,7 @@ struct qcom_ethqos {
 	struct ethqos_emac_pm_ctx pm;
 	phy_interface_t phy_mode;
 	int serdes_speed;
+	int (*set_serdes_speed)(struct qcom_ethqos *ethqos);
 
 	const struct ethqos_emac_por *por;
 	unsigned int num_por;
@@ -640,11 +641,16 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos, int speed)
 	return 0;
 }
 
+static int ethqos_set_serdes_speed_phy(struct qcom_ethqos *ethqos)
+{
+	return phy_set_speed(ethqos->pm.serdes_phy, ethqos->serdes_speed);
+}
+
 static void ethqos_set_serdes_speed(struct qcom_ethqos *ethqos, int speed)
 {
 	if (ethqos->serdes_speed != speed) {
-		phy_set_speed(ethqos->pm.serdes_phy, speed);
 		ethqos->serdes_speed = speed;
+		ethqos->set_serdes_speed(ethqos);
 	}
 }
 
@@ -865,6 +871,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy),
 				     "Failed to get serdes phy\n");
 
+	ethqos->set_serdes_speed = ethqos_set_serdes_speed_phy;
 	ethqos->serdes_speed = SPEED_1000;
 	ethqos_update_link_clk(ethqos, SPEED_1000);
 	ethqos_set_func_clk_en(ethqos);

-- 
2.51.0