From: Jonas Gorski <jonas.gorski@gmail.com>
To: Florian Fainelli <florian.fainelli@broadcom.com>,
Andrew Lunn <andrew@lunn.ch>, Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net-next 1/8] net: dsa: b53: b53_arl_read{,25}(): use the entry for comparision
Date: Fri, 7 Nov 2025 09:07:42 +0100 [thread overview]
Message-ID: <20251107080749.26936-2-jonas.gorski@gmail.com> (raw)
In-Reply-To: <20251107080749.26936-1-jonas.gorski@gmail.com>
Align the b53_arl_read{,25}() functions by consistently using the
parsed arl entry instead of parsing the raw registers again.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
drivers/net/dsa/b53/b53_common.c | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index c911d7ea601f..1b94cf7b06e8 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1850,7 +1850,7 @@ static int b53_arl_rw_op(struct b53_device *dev, unsigned int op)
return b53_arl_op_wait(dev);
}
-static int b53_arl_read(struct b53_device *dev, u64 mac,
+static int b53_arl_read(struct b53_device *dev, const u8 *mac,
u16 vid, struct b53_arl_entry *ent, u8 *idx)
{
DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
@@ -1874,14 +1874,13 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
B53_ARLTBL_DATA_ENTRY(i), &fwd_entry);
b53_arl_to_entry(ent, mac_vid, fwd_entry);
- if (!(fwd_entry & ARLTBL_VALID)) {
+ if (!ent->is_valid) {
set_bit(i, free_bins);
continue;
}
- if ((mac_vid & ARLTBL_MAC_MASK) != mac)
+ if (!ether_addr_equal(ent->mac, mac))
continue;
- if (dev->vlan_enabled &&
- ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid)
+ if (dev->vlan_enabled && ent->vid != vid)
continue;
*idx = i;
return 0;
@@ -1891,7 +1890,7 @@ static int b53_arl_read(struct b53_device *dev, u64 mac,
return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT;
}
-static int b53_arl_read_25(struct b53_device *dev, u64 mac,
+static int b53_arl_read_25(struct b53_device *dev, const u8 *mac,
u16 vid, struct b53_arl_entry *ent, u8 *idx)
{
DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES);
@@ -1913,14 +1912,13 @@ static int b53_arl_read_25(struct b53_device *dev, u64 mac,
b53_arl_to_entry_25(ent, mac_vid);
- if (!(mac_vid & ARLTBL_VALID_25)) {
+ if (!ent->is_valid) {
set_bit(i, free_bins);
continue;
}
- if ((mac_vid & ARLTBL_MAC_MASK) != mac)
+ if (!ether_addr_equal(ent->mac, mac))
continue;
- if (dev->vlan_enabled &&
- ((mac_vid >> ARLTBL_VID_S_65) & ARLTBL_VID_MASK_25) != vid)
+ if (dev->vlan_enabled && ent->vid != vid)
continue;
*idx = i;
return 0;
@@ -1953,9 +1951,9 @@ static int b53_arl_op(struct b53_device *dev, int op, int port,
return ret;
if (is5325(dev) || is5365(dev))
- ret = b53_arl_read_25(dev, mac, vid, &ent, &idx);
+ ret = b53_arl_read_25(dev, addr, vid, &ent, &idx);
else
- ret = b53_arl_read(dev, mac, vid, &ent, &idx);
+ ret = b53_arl_read(dev, addr, vid, &ent, &idx);
/* If this is a read, just finish now */
if (op)
--
2.43.0
next prev parent reply other threads:[~2025-11-07 8:08 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-07 8:07 [PATCH net-next 0/8] net: dsa: b53: add support for BCM5389/97/98 and BCM63XX ARL formats Jonas Gorski
2025-11-07 8:07 ` Jonas Gorski [this message]
2025-11-08 0:39 ` [PATCH net-next 1/8] net: dsa: b53: b53_arl_read{,25}(): use the entry for comparision Florian Fainelli
2025-11-07 8:07 ` [PATCH net-next 2/8] net: dsa: b53: move reading ARL entries into their own function Jonas Gorski
2025-11-08 0:40 ` Florian Fainelli
2025-11-07 8:07 ` [PATCH net-next 3/8] net: dsa: b53: move writing ARL entries into their own functions Jonas Gorski
2025-11-08 0:42 ` Florian Fainelli
2025-11-07 8:07 ` [PATCH net-next 4/8] net: dsa: b53: provide accessors for accessing ARL_SRCH_CTL Jonas Gorski
2025-11-08 0:42 ` Florian Fainelli
2025-11-07 8:07 ` [PATCH net-next 5/8] net: dsa: b53: split reading search entry into their own functions Jonas Gorski
2025-11-08 0:43 ` Florian Fainelli
2025-11-07 8:07 ` [PATCH net-next 6/8] net: dsa: b53: move ARL entry functions into ops struct Jonas Gorski
2025-11-08 0:43 ` Florian Fainelli
2025-11-07 8:07 ` [PATCH net-next 7/8] net: dsa: b53: add support for 5389/5397/5398 ARL entry format Jonas Gorski
2025-11-08 1:02 ` Florian Fainelli
2025-11-07 8:07 ` [PATCH net-next 8/8] net: dsa: b53: add support for bcm63xx " Jonas Gorski
2025-11-08 1:05 ` Florian Fainelli
2025-11-08 1:05 ` [PATCH net-next 0/8] net: dsa: b53: add support for BCM5389/97/98 and BCM63XX ARL formats Florian Fainelli
2025-11-11 1:30 ` patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251107080749.26936-2-jonas.gorski@gmail.com \
--to=jonas.gorski@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox