[PATCH RESEND] i2c: designware-platdrv: handle reset control deassert error

[Artem Shimko <a.shimko.dev@gmail.com>]

Handle the error returned by reset_control_deassert() in the probe
function to prevent continuing probe when reset deassertion fails.

Previously, reset_control_deassert() was called without checking its
return value, which could lead to probe continuing even when the
device reset wasn't properly deasserted.

The fix checks the return value and returns an error with dev_err_probe()
if reset deassertion fails, providing better error handling.

Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
---

Hi,

Resending this patch that seems to have been overlooked.
Thanks for your time.

Previous discussion: https://lore.kernel.org/all/c863512af9a13eb92bde7e0d383d4b4c81e5ce3e.camel@pengutronix.de/T/#t

--
Regards
Artem

 drivers/i2c/busses/i2c-designware-platdrv.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 34d881572351..bfaedb851511 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -240,7 +240,9 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	if (IS_ERR(dev->rst))
 		return dev_err_probe(device, PTR_ERR(dev->rst), "failed to acquire reset\n");
 
-	reset_control_deassert(dev->rst);
+	ret = reset_control_deassert(dev->rst);
+	if (ret)
+		return dev_err_probe(device, ret, "Failed to deassert reset\n");
 
 	ret = i2c_dw_fw_parse_and_configure(dev);
 	if (ret)
-- 
2.43.0