From: Tejun Heo <tj@kernel.org>
To: David Vernet <void@manifault.com>,
Andrea Righi <andrea.righi@linux.dev>,
Changwoo Min <changwoo@igalia.com>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>,
Emil Tsalapatis <etsal@meta.com>,
sched-ext@lists.linux.dev, linux-kernel@vger.kernel.org,
Tejun Heo <tj@kernel.org>, Andrea Righi <arighi@nvidia.com>,
Emil Tsalapatis <emil@etsalapatis.com>
Subject: [PATCH 03/13] sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode
Date: Tue, 11 Nov 2025 09:18:06 -1000 [thread overview]
Message-ID: <20251111191816.862797-4-tj@kernel.org> (raw)
In-Reply-To: <20251111191816.862797-1-tj@kernel.org>
Bypass mode routes tasks through fallback dispatch queues. Originally a single
global DSQ, b7b3b2dbae73 ("sched_ext: Split the global DSQ per NUMA node")
changed this to per-node DSQs to resolve NUMA-related livelocks.
Dan Schatzberg found per-node DSQs can still livelock when many threads are
pinned to different small CPU subsets: each CPU must scan many incompatible
tasks to find runnable ones, causing severe contention with high CPU counts.
Switch to per-CPU bypass DSQs. Each task queues on its current CPU. Default
idle CPU selection and direct dispatch handle most cases well.
This introduces a failure mode when tasks concentrate on one CPU in
over-saturated systems. If the BPF scheduler severely skews placement before
triggering bypass, that CPU's queue may be too long to drain, causing RCU
stalls. A load balancer in a future patch will address this. The bypass DSQ is
separate from local DSQ to enable load balancing: local DSQs use rq locks,
preventing efficient scanning and transfer across CPUs, especially problematic
when systems are already contended.
v2: Clarified why bypass DSQ is separate from local DSQ (Andrea Righi).
Reported-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Reviewed-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
include/linux/sched/ext.h | 1 +
kernel/sched/ext.c | 16 +++++++++++++---
kernel/sched/sched.h | 1 +
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/include/linux/sched/ext.h b/include/linux/sched/ext.h
index 60285c3d07cf..3d3216ff9188 100644
--- a/include/linux/sched/ext.h
+++ b/include/linux/sched/ext.h
@@ -57,6 +57,7 @@ enum scx_dsq_id_flags {
SCX_DSQ_INVALID = SCX_DSQ_FLAG_BUILTIN | 0,
SCX_DSQ_GLOBAL = SCX_DSQ_FLAG_BUILTIN | 1,
SCX_DSQ_LOCAL = SCX_DSQ_FLAG_BUILTIN | 2,
+ SCX_DSQ_BYPASS = SCX_DSQ_FLAG_BUILTIN | 3,
SCX_DSQ_LOCAL_ON = SCX_DSQ_FLAG_BUILTIN | SCX_DSQ_FLAG_LOCAL_ON,
SCX_DSQ_LOCAL_CPU_MASK = 0xffffffffLLU,
};
diff --git a/kernel/sched/ext.c b/kernel/sched/ext.c
index 43083602c15e..747391a3f6e3 100644
--- a/kernel/sched/ext.c
+++ b/kernel/sched/ext.c
@@ -1298,7 +1298,7 @@ static void do_enqueue_task(struct rq *rq, struct task_struct *p, u64 enq_flags,
if (scx_rq_bypassing(rq)) {
__scx_add_event(sch, SCX_EV_BYPASS_DISPATCH, 1);
- goto global;
+ goto bypass;
}
if (p->scx.ddsp_dsq_id != SCX_DSQ_INVALID)
@@ -1356,6 +1356,9 @@ static void do_enqueue_task(struct rq *rq, struct task_struct *p, u64 enq_flags,
global:
dsq = find_global_dsq(sch, p);
goto enqueue;
+bypass:
+ dsq = &task_rq(p)->scx.bypass_dsq;
+ goto enqueue;
enqueue:
/*
@@ -2154,8 +2157,14 @@ static int balance_one(struct rq *rq, struct task_struct *prev)
if (consume_global_dsq(sch, rq))
goto has_tasks;
- if (unlikely(!SCX_HAS_OP(sch, dispatch)) ||
- scx_rq_bypassing(rq) || !scx_rq_online(rq))
+ if (scx_rq_bypassing(rq)) {
+ if (consume_dispatch_q(sch, rq, &rq->scx.bypass_dsq))
+ goto has_tasks;
+ else
+ goto no_tasks;
+ }
+
+ if (unlikely(!SCX_HAS_OP(sch, dispatch)) || !scx_rq_online(rq))
goto no_tasks;
dspc->rq = rq;
@@ -5371,6 +5380,7 @@ void __init init_sched_ext_class(void)
int n = cpu_to_node(cpu);
init_dsq(&rq->scx.local_dsq, SCX_DSQ_LOCAL);
+ init_dsq(&rq->scx.bypass_dsq, SCX_DSQ_BYPASS);
INIT_LIST_HEAD(&rq->scx.runnable_list);
INIT_LIST_HEAD(&rq->scx.ddsp_deferred_locals);
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index 27aae2a298f8..5991133a4849 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -808,6 +808,7 @@ struct scx_rq {
struct balance_callback deferred_bal_cb;
struct irq_work deferred_irq_work;
struct irq_work kick_cpus_irq_work;
+ struct scx_dispatch_q bypass_dsq;
};
#endif /* CONFIG_SCHED_CLASS_EXT */
--
2.51.2
next prev parent reply other threads:[~2025-11-11 19:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-11 19:18 [PATCHSET v3 sched_ext/for-6.19] sched_ext: Improve bypass mode scalability Tejun Heo
2025-11-11 19:18 ` [PATCH 01/13] sched_ext: Use shorter slice in bypass mode Tejun Heo
2025-11-11 19:18 ` [PATCH 02/13] sched_ext: Refactor do_enqueue_task() local and global DSQ paths Tejun Heo
2025-11-11 19:18 ` Tejun Heo [this message]
2025-11-11 19:18 ` [PATCH 04/13] sched_ext: Simplify breather mechanism with scx_aborting flag Tejun Heo
2025-11-11 19:18 ` [PATCH 05/13] sched_ext: Exit dispatch and move operations immediately when aborting Tejun Heo
2025-11-11 19:18 ` [PATCH 06/13] sched_ext: Make scx_exit() and scx_vexit() return bool Tejun Heo
2025-11-11 19:18 ` [PATCH 07/13] sched_ext: Refactor lockup handlers into handle_lockup() Tejun Heo
2025-11-11 19:18 ` [PATCH 08/13] sched_ext: Make handle_lockup() propagate scx_verror() result Tejun Heo
2025-11-11 19:18 ` [PATCH 09/13] sched_ext: Hook up hardlockup detector Tejun Heo
2025-11-11 19:19 ` Tejun Heo
2025-11-13 22:33 ` Doug Anderson
2025-11-14 1:25 ` Tejun Heo
2025-11-14 1:33 ` [PATCH sched_ext/for-6.19] sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs Tejun Heo
2025-11-14 2:00 ` Emil Tsalapatis
2025-11-14 7:32 ` Andrea Righi
2025-11-14 19:24 ` Doug Anderson
2025-11-14 21:15 ` Tejun Heo
2025-11-14 21:19 ` Tejun Heo
2025-11-11 19:18 ` [PATCH 10/13] sched_ext: Add scx_cpu0 example scheduler Tejun Heo
2025-11-11 19:18 ` [PATCH 11/13] sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR Tejun Heo
2025-11-11 19:18 ` [PATCH 12/13] sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked() Tejun Heo
2025-11-11 19:18 ` [PATCH 13/13] sched_ext: Implement load balancer for bypass mode Tejun Heo
2025-11-11 19:30 ` Emil Tsalapatis
2025-11-12 16:49 ` [PATCHSET v3 sched_ext/for-6.19] sched_ext: Improve bypass mode scalability Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251111191816.862797-4-tj@kernel.org \
--to=tj@kernel.org \
--cc=andrea.righi@linux.dev \
--cc=arighi@nvidia.com \
--cc=changwoo@igalia.com \
--cc=emil@etsalapatis.com \
--cc=etsal@meta.com \
--cc=linux-kernel@vger.kernel.org \
--cc=schatzberg.dan@gmail.com \
--cc=sched-ext@lists.linux.dev \
--cc=void@manifault.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox