From: Sean Anderson <sean.anderson@linux.dev>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>,
dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org,
Mike Looijmans <mike.looijmans@topic.nl>,
David Airlie <airlied@gmail.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Anatoliy Klymenko <anatoliy.klymenko@amd.com>,
Maxime Ripard <mripard@kernel.org>,
linux-arm-kernel@lists.infradead.org,
Simona Vetter <simona@ffwll.ch>,
Michal Simek <michal.simek@amd.com>,
Sean Anderson <sean.anderson@linux.dev>
Subject: [PATCH 3/3] drm: zynqmp: Add blend mode property to graphics plane
Date: Thu, 13 Nov 2025 15:37:14 -0500 [thread overview]
Message-ID: <20251113203715.2768107-4-sean.anderson@linux.dev> (raw)
In-Reply-To: <20251113203715.2768107-1-sean.anderson@linux.dev>
When global alpha is enabled, per-pixel alpha is ignored. Allow
userspace to explicitly specify whether to use per-pixel alpha by
exposing it through the blend mode property. I'm not sure whether the
per-pixel alpha is pre-multiplied or not [1], but apparently it *must* be
pre-multiplied so I guess we have to advertise it.
[1] All we get is "The alpha value available with the graphics stream
will define the transparency of the graphics."
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---
drivers/gpu/drm/xlnx/zynqmp_kms.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c b/drivers/gpu/drm/xlnx/zynqmp_kms.c
index 456ada9ac003..fa1cfc16db36 100644
--- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
+++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
@@ -61,6 +61,13 @@ static int zynqmp_dpsub_plane_atomic_check(struct drm_plane *plane,
if (!new_plane_state->crtc)
return 0;
+ if (new_plane_state->pixel_blend_mode != DRM_MODE_BLEND_PIXEL_NONE &&
+ new_plane_state->alpha >> 8 != 0xff) {
+ drm_dbg_kms(plane->dev,
+ "Plane alpha must be 1.0 when using pixel alpha\n");
+ return -EINVAL;
+ }
+
crtc_state = drm_atomic_get_crtc_state(state, new_plane_state->crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
@@ -117,9 +124,13 @@ static void zynqmp_dpsub_plane_atomic_update(struct drm_plane *plane,
zynqmp_disp_layer_update(layer, new_state);
- if (plane->index == ZYNQMP_DPSUB_LAYER_GFX)
- zynqmp_disp_blend_set_global_alpha(dpsub->disp, true,
+ if (plane->index == ZYNQMP_DPSUB_LAYER_GFX) {
+ bool blend = plane->state->pixel_blend_mode ==
+ DRM_MODE_BLEND_PIXEL_NONE;
+
+ zynqmp_disp_blend_set_global_alpha(dpsub->disp, blend,
plane->state->alpha >> 8);
+ }
/*
* Unconditionally enable the layer, as it may have been disabled
@@ -179,9 +190,18 @@ static int zynqmp_dpsub_create_planes(struct zynqmp_dpsub *dpsub)
return ret;
if (i == ZYNQMP_DPSUB_LAYER_GFX) {
+ unsigned int blend_modes =
+ BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+ BIT(DRM_MODE_BLEND_PREMULTI);
+
ret = drm_plane_create_alpha_property(plane);
if (ret)
return ret;
+
+ ret = drm_plane_create_blend_mode_property(plane,
+ blend_modes);
+ if (ret)
+ return ret;
}
}
--
2.35.1.1320.gc452695387.dirty
next prev parent reply other threads:[~2025-11-13 20:37 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-13 20:37 [PATCH 0/3] drm: zynqmp: Make the video plane primary Sean Anderson
2025-11-13 20:37 ` [PATCH 1/3] drm: zynqmp: Check property creation status Sean Anderson
2025-11-13 23:05 ` Klymenko, Anatoliy
2025-11-14 7:36 ` Thomas Zimmermann
2025-11-13 20:37 ` [PATCH 2/3] drm: zynqmp: Make the video plane primary Sean Anderson
2025-11-13 22:45 ` Klymenko, Anatoliy
2025-11-13 22:51 ` Sean Anderson
2025-11-15 0:57 ` Klymenko, Anatoliy
2025-11-17 16:09 ` Sean Anderson
2025-12-04 22:33 ` Klymenko, Anatoliy
2026-01-05 19:46 ` Sean Anderson
2025-11-13 20:37 ` Sean Anderson [this message]
2025-11-13 23:03 ` [PATCH 3/3] drm: zynqmp: Add blend mode property to graphics plane Klymenko, Anatoliy
2025-11-13 23:07 ` Sean Anderson
2025-11-15 0:12 ` Klymenko, Anatoliy
2025-11-17 15:35 ` Sean Anderson
2025-12-04 21:16 ` Klymenko, Anatoliy
2026-01-05 19:58 ` Sean Anderson
2025-11-13 23:59 ` Klymenko, Anatoliy
2025-11-14 15:35 ` Sean Anderson
2025-11-14 7:42 ` [PATCH 0/3] drm: zynqmp: Make the video plane primary Thomas Zimmermann
2025-11-14 15:35 ` Sean Anderson
2025-12-22 9:29 ` Mikko Rapeli
2025-12-22 9:42 ` Mikko Rapeli
2025-12-22 9:48 ` Tomi Valkeinen
2025-12-22 16:13 ` Mike Looijmans
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251113203715.2768107-4-sean.anderson@linux.dev \
--to=sean.anderson@linux.dev \
--cc=airlied@gmail.com \
--cc=anatoliy.klymenko@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=michal.simek@amd.com \
--cc=mike.looijmans@topic.nl \
--cc=mripard@kernel.org \
--cc=simona@ffwll.ch \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox