From: srini@kernel.org
To: gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org,
Jascha Sundaresan <flizarthanon@gmail.com>,
"Rob Herring (Arm)" <robh@kernel.org>,
Srinivas Kandagatla <srini@kernel.org>
Subject: [PATCH 4/8] nvmem: layouts: u-boot-env: add optional "env-size" property
Date: Fri, 14 Nov 2025 11:06:32 +0000 [thread overview]
Message-ID: <20251114110636.143268-5-srini@kernel.org> (raw)
In-Reply-To: <20251114110636.143268-1-srini@kernel.org>
From: Jascha Sundaresan <flizarthanon@gmail.com>
Some devices reserve a larger NVMEM region for the U-Boot environment
than the actual environment data length used by U-Boot itself. The CRC32
in the U-Boot header is calculated over the smaller data length, causing
CRC validation to fail when Linux reads the full partition.
Allow an optional device tree property "env-size" to specify the
environment data size to use for CRC computation.
v2: add missing $ref line to DT binding
Signed-off-by: Jascha Sundaresan <flizarthanon@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
---
.../devicetree/bindings/nvmem/layouts/u-boot,env.yaml | 7 +++++++
drivers/nvmem/layouts/u-boot-env.c | 4 +++-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml
index 56a8f55d4a09..e9e75c38bd11 100644
--- a/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml
+++ b/Documentation/devicetree/bindings/nvmem/layouts/u-boot,env.yaml
@@ -46,6 +46,12 @@ properties:
type: object
description: Command to use for automatic booting
+ env-size:
+ description:
+ Size in bytes of the environment data used by U-Boot for CRC
+ calculation. If omitted, the full NVMEM region size is used.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
ethaddr:
type: object
description: Ethernet interfaces base MAC address.
@@ -104,6 +110,7 @@ examples:
partition-u-boot-env {
compatible = "brcm,env";
+ env-size = <0x20000>;
ethaddr {
};
diff --git a/drivers/nvmem/layouts/u-boot-env.c b/drivers/nvmem/layouts/u-boot-env.c
index a27eeb08146f..ab32bf1291af 100644
--- a/drivers/nvmem/layouts/u-boot-env.c
+++ b/drivers/nvmem/layouts/u-boot-env.c
@@ -99,10 +99,12 @@ int u_boot_env_parse(struct device *dev, struct nvmem_device *nvmem,
uint32_t crc32;
uint32_t calc;
uint8_t *buf;
+ u32 env_size;
int bytes;
int err;
- dev_size = nvmem_dev_size(nvmem);
+ dev_size = device_property_read_u32(dev, "env-size", &env_size) ?
+ nvmem_dev_size(nvmem) : (size_t)env_size;
buf = kzalloc(dev_size, GFP_KERNEL);
if (!buf) {
--
2.51.0
next prev parent reply other threads:[~2025-11-14 11:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-14 11:06 [PATCH 0/8] nvmem: patches for 6.19 srini
2025-11-14 11:06 ` [PATCH 1/8] dt-bindings: nvmem: qfprom: Add sa8775p compatible srini
2025-11-14 11:06 ` [PATCH 2/8] dt-bindings: nvmem: Support MediaTek MT8189 evb board efuse srini
2025-11-14 11:06 ` [PATCH 3/8] nvmem: Add driver for the eeprom in qnap-mcu controllers srini
2025-11-26 13:42 ` Andy Shevchenko
2025-11-14 11:06 ` srini [this message]
2025-11-14 11:06 ` [PATCH 5/8] dt-bindings: nvmem: mediatek: efuse: Add compatible for MT8189 SoC srini
2025-11-14 11:06 ` [PATCH 6/8] dt-bindings: nvmem: don't check node names srini
2025-11-14 11:06 ` [PATCH 7/8] dt-bindings: nvmem: imx-ocotp: Add support for i.MX94 srini
2025-11-14 11:06 ` [PATCH 8/8] nvmem: imx-ocotp-ele: Add i.MX94 OCOTP support srini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251114110636.143268-5-srini@kernel.org \
--to=srini@kernel.org \
--cc=flizarthanon@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox