[PATCH 1/2] net: phy: adin1100: Fix software power-down ready condition

[Alexander Dahl <ada@thorsis.com>]

Value CRSM_SFT_PD written to Software Power-Down Control Register
(CRSM_SFT_PD_CNTRL) is 0x01 and therefor different to value
CRSM_SFT_PD_RDY (0x02) read from System Status Register (CRSM_STAT) for
confirmation powerdown has been reached.

The condition could have only worked when disabling powerdown
(both 0x00), but never when enabling it (0x01 != 0x02).

Result is a timeout, like so:

    $ ifdown eth0
    macb f802c000.ethernet eth0: Link is Down
    ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110
    ADIN1100 f802c000.ethernet-ffffffff:01: adin_set_powerdown_mode failed: -110

Fixes: 7eaf9132996a ("net: phy: adin1100: Add initial support for ADIN1100 industrial PHY")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
---
 drivers/net/phy/adin1100.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/phy/adin1100.c b/drivers/net/phy/adin1100.c
index bd7a47a903ac..10b796c2daee 100644
--- a/drivers/net/phy/adin1100.c
+++ b/drivers/net/phy/adin1100.c
@@ -201,7 +201,7 @@ static int adin_set_powerdown_mode(struct phy_device *phydev, bool en)
 		return ret;
 
 	return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ADIN_CRSM_STAT, ret,
-					 (ret & ADIN_CRSM_SFT_PD_RDY) == val,
+					 !!(ret & ADIN_CRSM_SFT_PD_RDY) == en,
 					 1000, 30000, true);
 }
 
-- 
2.39.5