From: Hal Feng <hal.feng@starfivetech.com>
To: "Conor Dooley" <conor+dt@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Palmer Dabbelt" <palmer@dabbelt.com>,
"Paul Walmsley" <pjw@kernel.org>,
"Albert Ou" <aou@eecs.berkeley.edu>,
"Rafael J . Wysocki" <rafael@kernel.org>,
"Viresh Kumar" <viresh.kumar@linaro.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Emil Renner Berthing" <emil.renner.berthing@canonical.com>,
"Heinrich Schuchardt" <heinrich.schuchardt@canonical.com>,
"E Shattow" <e@freeshell.de>
Cc: Hal Feng <hal.feng@starfivetech.com>,
devicetree@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 4/5] riscv: dts: starfive: Add VisionFive 2 Lite board device tree
Date: Thu, 20 Nov 2025 16:29:45 +0800 [thread overview]
Message-ID: <20251120082946.109378-5-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20251120082946.109378-1-hal.feng@starfivetech.com>
VisionFive 2 Lite is a mini SBC based on the StarFive JH7110S SoC.
Board features:
- JH7110S SoC
- 4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 1x USB 3.0 host port
- 3x USB 2.0 host port
- 1x M.2 M-Key (size: 2242)
- 1x MicroSD slot (optional non-removable 64GiB eMMC)
- 1x QSPI Flash
- 1x I2C EEPROM
- 1x 1Gbps Ethernet port
- SDIO-based Wi-Fi & UART-based Bluetooth
- 1x HDMI port
- 1x 2-lane DSI
- 1x 2-lane CSI
VisionFive 2 Lite schematics: https://doc-en.rvspace.org/VisionFive2Lite/PDF/VF2_LITE_V1.10_TF_20250818_SCH.pdf
VisionFive 2 Lite Quick Start Guide: https://doc-en.rvspace.org/VisionFive2Lite/VisionFive2LiteQSG/index.html
More documents: https://doc-en.rvspace.org/Doc_Center/visionfive_2_lite.html
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
arch/riscv/boot/dts/starfive/Makefile | 2 ++
.../jh7110s-starfive-visionfive-2-lite.dts | 20 +++++++++++++++++++
2 files changed, 22 insertions(+)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 62b659f89ba7..f53109253d41 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -15,3 +15,5 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
+
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110s-starfive-visionfive-2-lite.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
new file mode 100644
index 000000000000..ac5e66027bad
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 StarFive Technology Co., Ltd.
+ * Copyright (C) 2025 Hal Feng <hal.feng@starfivetech.com>
+ */
+
+/dts-v1/;
+#include "jh7110s-starfive-visionfive-2-lite.dtsi"
+
+/ {
+ model = "StarFive VisionFive 2 Lite";
+ compatible = "starfive,visionfive-2-lite", "starfive,jh7110s";
+};
+
+&mmc0 {
+ bus-width = <4>;
+ cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
+ disable-wp;
+ cap-sd-highspeed;
+};
--
2.43.2
next prev parent reply other threads:[~2025-11-20 10:04 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-20 8:29 [PATCH v3 0/5] Add support for StarFive VisionFive 2 Lite board Hal Feng
2025-11-20 8:29 ` [PATCH v3 1/5] dt-bindings: PCI: starfive,jh7110-pcie: Add enable-gpios property Hal Feng
2025-11-20 12:52 ` Manivannan Sadhasivam
2025-11-21 4:23 ` Hal Feng
2025-11-23 14:33 ` Krzysztof Kozlowski
2025-11-20 8:29 ` [PATCH v3 2/5] dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board Hal Feng
2025-11-20 16:24 ` Rob Herring (Arm)
2025-11-20 8:29 ` [PATCH v3 3/5] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants Hal Feng
2025-11-21 11:51 ` Emil Renner Berthing
2025-11-22 3:30 ` E Shattow
2025-11-25 9:54 ` Hal Feng
2025-11-20 8:29 ` Hal Feng [this message]
2025-11-21 11:51 ` [PATCH v3 4/5] riscv: dts: starfive: Add VisionFive 2 Lite board device tree Emil Renner Berthing
2025-11-20 8:29 ` [PATCH v3 5/5] riscv: dts: starfive: Add VisionFive 2 Lite eMMC " Hal Feng
2025-11-21 11:52 ` Emil Renner Berthing
2025-11-21 18:23 ` [PATCH v3 0/5] Add support for StarFive VisionFive 2 Lite board Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251120082946.109378-5-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=aou@eecs.berkeley.edu \
--cc=bhelgaas@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=e@freeshell.de \
--cc=emil.renner.berthing@canonical.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=krzk+dt@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=palmer@dabbelt.com \
--cc=pjw@kernel.org \
--cc=rafael@kernel.org \
--cc=robh@kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox