From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>,
linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Subject: [PATCH v1 3/7] spi: microchip-core: Refactor FIFO read and write handlers
Date: Tue, 25 Nov 2025 21:15:33 +0100 [thread overview]
Message-ID: <20251125201700.1901959-4-andriy.shevchenko@linux.intel.com> (raw)
In-Reply-To: <20251125201700.1901959-1-andriy.shevchenko@linux.intel.com>
Make both handlers to be shorter and easier to understand.
While at it, unify their style.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/spi/spi-microchip-core-spi.c | 32 +++++++++-------------------
1 file changed, 10 insertions(+), 22 deletions(-)
diff --git a/drivers/spi/spi-microchip-core-spi.c b/drivers/spi/spi-microchip-core-spi.c
index d2d1e86568a3..9620aa886912 100644
--- a/drivers/spi/spi-microchip-core-spi.c
+++ b/drivers/spi/spi-microchip-core-spi.c
@@ -92,21 +92,14 @@ static inline void mchp_corespi_disable(struct mchp_corespi *spi)
static inline void mchp_corespi_read_fifo(struct mchp_corespi *spi, u32 fifo_max)
{
for (int i = 0; i < fifo_max; i++) {
- u32 data;
-
while (readb(spi->regs + MCHP_CORESPI_REG_STAT) &
MCHP_CORESPI_STATUS_RXFIFO_EMPTY)
;
- data = readb(spi->regs + MCHP_CORESPI_REG_RXDATA);
+ if (spi->rx_buf)
+ *spi->rx_buf++ = readb(spi->regs + MCHP_CORESPI_REG_RXDATA);
spi->rx_len--;
- if (!spi->rx_buf)
- continue;
-
- *spi->rx_buf = data;
-
- spi->rx_buf++;
}
}
@@ -128,23 +121,18 @@ static void mchp_corespi_disable_ints(struct mchp_corespi *spi)
static inline void mchp_corespi_write_fifo(struct mchp_corespi *spi, u32 fifo_max)
{
- int i = 0;
-
- while ((i < fifo_max) &&
- !(readb(spi->regs + MCHP_CORESPI_REG_STAT) &
- MCHP_CORESPI_STATUS_TXFIFO_FULL)) {
- u32 word;
-
- word = spi->tx_buf ? *spi->tx_buf : 0xaa;
- writeb(word, spi->regs + MCHP_CORESPI_REG_TXDATA);
+ for (int i = 0; i < fifo_max; i++) {
+ if (readb(spi->regs + MCHP_CORESPI_REG_STAT) &
+ MCHP_CORESPI_STATUS_TXFIFO_FULL)
+ break;
if (spi->tx_buf)
- spi->tx_buf++;
+ writeb(*spi->tx_buf++, spi->regs + MCHP_CORESPI_REG_TXDATA);
+ else
+ writeb(0xaa, spi->regs + MCHP_CORESPI_REG_TXDATA);
- i++;
+ spi->tx_len--;
}
-
- spi->tx_len -= i;
}
static void mchp_corespi_set_cs(struct spi_device *spi, bool disable)
--
2.50.1
next prev parent reply other threads:[~2025-11-25 20:17 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-25 20:15 [PATCH v1 0/7] spi: microchip-core: Code improvements Andy Shevchenko
2025-11-25 20:15 ` [PATCH v1 1/7] spi: microchip-core: use min() instead of min_t() Andy Shevchenko
2025-11-25 20:15 ` [PATCH v1 2/7] spi: microchip-core: Make use of device properties Andy Shevchenko
2025-11-25 22:42 ` Mark Brown
2025-11-25 23:00 ` Conor Dooley
2025-11-25 23:19 ` Mark Brown
2025-11-26 6:35 ` Andy Shevchenko
2025-11-26 12:03 ` Mark Brown
2025-11-26 16:27 ` Andy Shevchenko
2025-11-26 17:24 ` Mark Brown
2025-11-26 17:29 ` Conor Dooley
2025-11-26 17:45 ` Andy Shevchenko
2025-11-25 20:15 ` Andy Shevchenko [this message]
2025-11-25 20:15 ` [PATCH v1 4/7] spi: microchip-core: Replace dead code (-ENOMEM error message) Andy Shevchenko
2025-11-25 20:15 ` [PATCH v1 5/7] spi: microchip-core: Utilise temporary variable for struct device Andy Shevchenko
2025-11-25 20:15 ` [PATCH v1 6/7] spi: microchip-core: Use SPI_MODE_X_MASK Andy Shevchenko
2025-11-25 20:15 ` [PATCH v1 7/7] spi: microchip-core: Remove unneeded PM related macro Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251125201700.1901959-4-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--cc=prajna.rajendrakumar@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox