From: Shrikant Raskar <raskar.shree97@gmail.com>
To: jic23@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org
Cc: dlechner@baylibre.com, nuno.sa@analog.com, andy@kernel.org,
heiko@sntech.de, neil.armstrong@linaro.org,
skhan@linuxfoundation.org, david.hunter.linux@gmail.com,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Shrikant Raskar <raskar.shree97@gmail.com>
Subject: [PATCH 1/3] dt-bindings: iio: proximity: Add YAML binding for RFD77402 ToF sensor
Date: Wed, 26 Nov 2025 08:44:38 +0530 [thread overview]
Message-ID: <20251126031440.30065-2-raskar.shree97@gmail.com> (raw)
In-Reply-To: <20251126031440.30065-1-raskar.shree97@gmail.com>
The RFD77402 driver has existed without a formal device tree binding
description. With the recent addition of Device Tree support and
interrupt handling in the driver, it is now necessary to document
the DT properties used for configuring the device.
Since the binding introduces the compatible string "rfdigital,rfd77402",
the "rfdigital" vendor prefix is also added to vendor-prefixes.yaml.
Signed-off-by: Shrikant Raskar <raskar.shree97@gmail.com>
---
.../iio/proximity/rfdigital,rfd77402.yaml | 55 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
2 files changed, 57 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/proximity/rfdigital,rfd77402.yaml
diff --git a/Documentation/devicetree/bindings/iio/proximity/rfdigital,rfd77402.yaml b/Documentation/devicetree/bindings/iio/proximity/rfdigital,rfd77402.yaml
new file mode 100644
index 000000000000..93deaa4e8b7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/rfdigital,rfd77402.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/rfdigital,rfd77402.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RF Digital RFD77402 ToF sensor
+
+maintainers:
+ - Shrikant Raskar <raskar.shree97@gmail.com>
+
+description: |
+ The RF Digital RFD77402 is a Time-of-Flight (ToF) proximity and distance
+ sensor providing up to 200 mm range measurement over an I2C interface.
+
+properties:
+ compatible:
+ const: rfdigital,rfd77402
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: |
+ Generated by the device to announce that a new
+ measurement data is ready in result register.
+
+ vdd-supply:
+ description: Regulator that provides power to the sensor
+
+ vddio-supply:
+ description: Regulator providing I/O interface voltage
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ proximity@4c {
+ compatible = "rfdigital,rfd77402";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index f1d1882009ba..a2e113e29e37 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1341,6 +1341,8 @@ patternProperties:
description: Revolution Robotics, Inc. (Revotics)
"^rex,.*":
description: iMX6 Rex Project
+ "^rfdigital,.*":
+ description: RF Digital Corporation
"^richtek,.*":
description: Richtek Technology Corporation
"^ricoh,.*":
--
2.43.0
next prev parent reply other threads:[~2025-11-26 3:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-11-26 3:14 [PATCH 0/3] iio: proximity: Add DT and interrupt support for RFD77402 Shrikant Raskar
2025-11-26 3:14 ` Shrikant Raskar [this message]
2025-11-26 9:53 ` [PATCH 1/3] dt-bindings: iio: proximity: Add YAML binding for RFD77402 ToF sensor Krzysztof Kozlowski
2025-11-26 18:09 ` Shrikant
2025-11-26 3:14 ` [PATCH 2/3] iio: proximity: rfd77402: Add Device Tree support Shrikant Raskar
2025-11-26 6:53 ` Andy Shevchenko
2025-11-26 3:14 ` [PATCH 3/3] iio: proximity: rfd77402: Add interrupt handling support Shrikant Raskar
2025-11-26 7:35 ` Andy Shevchenko
2025-11-28 16:06 ` Shrikant
2025-12-07 15:47 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251126031440.30065-2-raskar.shree97@gmail.com \
--to=raskar.shree97@gmail.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=david.hunter.linux@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=heiko@sntech.de \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
--cc=skhan@linuxfoundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox