[PATCH v5 13/17] drm/rockchip: vop2: Set correct output format for RK3576 YUV422

[Nicolas Frattaroli <nicolas.frattaroli@collabora.com>]

For RK3576 to be able to output YUV422 signals, it first needs to be
able to pick the right output mode in the display controller to do so.

The RK3576 hardware specifies different output formats depending on the
used display protocol.

Adjust the written register value based on the SoC and connector, so
other users of vcstate->output_mode don't have to care about this.

Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
index 21afcca1218c..cd18876955e4 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -1707,6 +1707,22 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
 	if (vcstate->output_mode == ROCKCHIP_OUT_MODE_AAAA &&
 	    !(vp_data->feature & VOP2_VP_FEATURE_OUTPUT_10BIT))
 		out_mode = ROCKCHIP_OUT_MODE_P888;
+	else if (vcstate->output_mode == ROCKCHIP_OUT_MODE_YUV422 &&
+		 vop2->version == VOP_VERSION_RK3576)
+		switch (vcstate->output_type) {
+		case DRM_MODE_CONNECTOR_DisplayPort:
+		case DRM_MODE_CONNECTOR_eDP:
+			out_mode = ROCKCHIP_OUT_MODE_YUV422_RK3576_DP;
+			break;
+		case DRM_MODE_CONNECTOR_HDMIA:
+			out_mode = ROCKCHIP_OUT_MODE_YUV422_RK3576_HDMI;
+			break;
+		default:
+			drm_err(vop2->drm, "Unknown DRM_MODE_CONNECTOR %d\n",
+				vcstate->output_type);
+			vop2_unlock(vop2);
+			return;
+		}
 	else
 		out_mode = vcstate->output_mode;
 

-- 
2.52.0