Re: Linux 6.18.1

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

diff --git a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
index f50d8e02f476..6b1f827a335b 100644
--- a/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
+++ b/Documentation/devicetree/bindings/serial/renesas,rsci.yaml
@@ -54,8 +54,6 @@ properties:
   power-domains:
     maxItems: 1
 
-  uart-has-rtscts: false
-
 required:
   - compatible
   - reg
diff --git a/Documentation/process/2.Process.rst b/Documentation/process/2.Process.rst
index ef3b116492df..f4fc0da8999d 100644
--- a/Documentation/process/2.Process.rst
+++ b/Documentation/process/2.Process.rst
@@ -104,8 +104,10 @@ kernels go out with a handful of known regressions though, hopefully, none
 of them are serious.
 
 Once a stable release is made, its ongoing maintenance is passed off to the
-"stable team," currently Greg Kroah-Hartman. The stable team will release
-occasional updates to the stable release using the 5.x.y numbering scheme.
+"stable team," currently consists of Greg Kroah-Hartman and Sasha Levin. The
+stable team will release occasional updates to the stable release using the
+5.x.y numbering scheme.
+
 To be considered for an update release, a patch must (1) fix a significant
 bug, and (2) already be merged into the mainline for the next development
 kernel. Kernels will typically receive stable updates for a little more
diff --git a/Documentation/tools/rtla/common_appendix.rst b/Documentation/tools/rtla/common_appendix.rst
deleted file mode 100644
index 53cae7537537..000000000000
--- a/Documentation/tools/rtla/common_appendix.rst
+++ /dev/null
@@ -1,24 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-EXIT STATUS
-===========
-
-::
-
- 0  Passed: the test did not hit the stop tracing condition
- 1  Error: invalid argument
- 2  Failed: the test hit the stop tracing condition
-
-REPORTING BUGS
-==============
-Report bugs to <linux-kernel@vger.kernel.org>
-and <linux-trace-devel@vger.kernel.org>
-
-LICENSE
-=======
-**rtla** is Free Software licensed under the GNU GPLv2
-
-COPYING
-=======
-Copyright \(C) 2021 Red Hat, Inc. Free use of this software is granted under
-the terms of the GNU Public License (GPL).
diff --git a/Documentation/tools/rtla/common_appendix.txt b/Documentation/tools/rtla/common_appendix.txt
new file mode 100644
index 000000000000..53cae7537537
--- /dev/null
+++ b/Documentation/tools/rtla/common_appendix.txt
@@ -0,0 +1,24 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+EXIT STATUS
+===========
+
+::
+
+ 0  Passed: the test did not hit the stop tracing condition
+ 1  Error: invalid argument
+ 2  Failed: the test hit the stop tracing condition
+
+REPORTING BUGS
+==============
+Report bugs to <linux-kernel@vger.kernel.org>
+and <linux-trace-devel@vger.kernel.org>
+
+LICENSE
+=======
+**rtla** is Free Software licensed under the GNU GPLv2
+
+COPYING
+=======
+Copyright \(C) 2021 Red Hat, Inc. Free use of this software is granted under
+the terms of the GNU Public License (GPL).
diff --git a/Documentation/tools/rtla/common_hist_options.rst b/Documentation/tools/rtla/common_hist_options.rst
deleted file mode 100644
index df53ff835bfb..000000000000
--- a/Documentation/tools/rtla/common_hist_options.rst
+++ /dev/null
@@ -1,23 +0,0 @@
-**-b**, **--bucket-size** *N*
-
-        Set the histogram bucket size (default *1*).
-
-**-E**, **--entries** *N*
-
-        Set the number of entries of the histogram (default 256).
-
-**--no-header**
-
-        Do not print header.
-
-**--no-summary**
-
-        Do not print summary.
-
-**--no-index**
-
-        Do not print index.
-
-**--with-zeros**
-
-        Print zero only entries.
diff --git a/Documentation/tools/rtla/common_hist_options.txt b/Documentation/tools/rtla/common_hist_options.txt
new file mode 100644
index 000000000000..df53ff835bfb
--- /dev/null
+++ b/Documentation/tools/rtla/common_hist_options.txt
@@ -0,0 +1,23 @@
+**-b**, **--bucket-size** *N*
+
+        Set the histogram bucket size (default *1*).
+
+**-E**, **--entries** *N*
+
+        Set the number of entries of the histogram (default 256).
+
+**--no-header**
+
+        Do not print header.
+
+**--no-summary**
+
+        Do not print summary.
+
+**--no-index**
+
+        Do not print index.
+
+**--with-zeros**
+
+        Print zero only entries.
diff --git a/Documentation/tools/rtla/common_options.rst b/Documentation/tools/rtla/common_options.rst
deleted file mode 100644
index 77ef35d3f831..000000000000
--- a/Documentation/tools/rtla/common_options.rst
+++ /dev/null
@@ -1,119 +0,0 @@
-**-c**, **--cpus** *cpu-list*
-
-        Set the osnoise tracer to run the sample threads in the cpu-list.
-
-**-H**, **--house-keeping** *cpu-list*
-
-        Run rtla control threads only on the given cpu-list.
-
-**-d**, **--duration** *time[s|m|h|d]*
-
-        Set the duration of the session.
-
-**-D**, **--debug**
-
-        Print debug info.
-
-**-e**, **--event** *sys:event*
-
-        Enable an event in the trace (**-t**) session. The argument can be a specific event, e.g., **-e** *sched:sched_switch*, or all events of a system group, e.g., **-e** *sched*. Multiple **-e** are allowed. It is only active when **-t** or **-a** are set.
-
-**--filter** *<filter>*
-
-        Filter the previous **-e** *sys:event* event with *<filter>*. For further information about event filtering see https://www.kernel.org/doc/html/latest/trace/events.html#event-filtering.
-
-**--trigger** *<trigger>*
-        Enable a trace event trigger to the previous **-e** *sys:event*.
-        If the *hist:* trigger is activated, the output histogram will be automatically saved to a file named *system_event_hist.txt*.
-        For example, the command:
-
-        rtla <command> <mode> -t -e osnoise:irq_noise --trigger="hist:key=desc,duration/1000:sort=desc,duration/1000:vals=hitcount"
-
-        Will automatically save the content of the histogram associated to *osnoise:irq_noise* event in *osnoise_irq_noise_hist.txt*.
-
-        For further information about event trigger see https://www.kernel.org/doc/html/latest/trace/events.html#event-triggers.
-
-**-P**, **--priority** *o:prio|r:prio|f:prio|d:runtime:period*
-
-        Set scheduling parameters to the osnoise tracer threads, the format to set the priority are:
-
-        - *o:prio* - use SCHED_OTHER with *prio*;
-        - *r:prio* - use SCHED_RR with *prio*;
-        - *f:prio* - use SCHED_FIFO with *prio*;
-        - *d:runtime[us|ms|s]:period[us|ms|s]* - use SCHED_DEADLINE with *runtime* and *period* in nanoseconds.
-
-**-C**, **--cgroup**\[*=cgroup*]
-
-        Set a *cgroup* to the tracer's threads. If the **-C** option is passed without arguments, the tracer's thread will inherit **rtla**'s *cgroup*. Otherwise, the threads will be placed on the *cgroup* passed to the option.
-
-**--warm-up** *s*
-
-        After starting the workload, let it run for *s* seconds before starting collecting the data, allowing the system to warm-up. Statistical data generated during warm-up is discarded.
-
-**--trace-buffer-size** *kB*
-        Set the per-cpu trace buffer size in kB for the tracing output.
-
-**--on-threshold** *action*
-
-        Defines an action to be executed when tracing is stopped on a latency threshold
-        specified by |threshold|.
-
-        Multiple --on-threshold actions may be specified, and they will be executed in
-        the order they are provided. If any action fails, subsequent actions in the list
-        will not be executed.
-
-        Supported actions are:
-
-        - *trace[,file=<filename>]*
-
-          Saves trace output, optionally taking a filename. Alternative to -t/--trace.
-          Note that nlike -t/--trace, specifying this multiple times will result in
-          the trace being saved multiple times.
-
-        - *signal,num=<sig>,pid=<pid>*
-
-          Sends signal to process. "parent" might be specified in place of pid to target
-          the parent process of rtla.
-
-        - *shell,command=<command>*
-
-          Execute shell command.
-
-        - *continue*
-
-          Continue tracing after actions are executed instead of stopping.
-
-        Example:
-
-        $ rtla |tool| |thresharg| 20 --on-threshold trace
-        --on-threshold shell,command="grep ipi_send |tracer|\_trace.txt"
-        --on-threshold signal,num=2,pid=parent
-
-        This will save a trace with the default filename "|tracer|\_trace.txt", print its
-        lines that contain the text "ipi_send" on standard output, and send signal 2
-        (SIGINT) to the parent process.
-
-        Performance Considerations:
-
-        |actionsperf|
-
-**--on-end** *action*
-
-        Defines an action to be executed at the end of tracing.
-
-        Multiple --on-end actions can be specified, and they will be executed in the order
-        they are provided. If any action fails, subsequent actions in the list will not be
-        executed.
-
-        See the documentation for **--on-threshold** for the list of supported actions, with
-        the exception that *continue* has no effect.
-
-        Example:
-
-        $ rtla |tool| -d 5s --on-end trace
-
-        This runs rtla with the default options, and saves trace output at the end.
-
-**-h**, **--help**
-
-        Print help menu.
diff --git a/Documentation/tools/rtla/common_options.txt b/Documentation/tools/rtla/common_options.txt
new file mode 100644
index 000000000000..77ef35d3f831
--- /dev/null
+++ b/Documentation/tools/rtla/common_options.txt
@@ -0,0 +1,119 @@
+**-c**, **--cpus** *cpu-list*
+
+        Set the osnoise tracer to run the sample threads in the cpu-list.
+
+**-H**, **--house-keeping** *cpu-list*
+
+        Run rtla control threads only on the given cpu-list.
+
+**-d**, **--duration** *time[s|m|h|d]*
+
+        Set the duration of the session.
+
+**-D**, **--debug**
+
+        Print debug info.
+
+**-e**, **--event** *sys:event*
+
+        Enable an event in the trace (**-t**) session. The argument can be a specific event, e.g., **-e** *sched:sched_switch*, or all events of a system group, e.g., **-e** *sched*. Multiple **-e** are allowed. It is only active when **-t** or **-a** are set.
+
+**--filter** *<filter>*
+
+        Filter the previous **-e** *sys:event* event with *<filter>*. For further information about event filtering see https://www.kernel.org/doc/html/latest/trace/events.html#event-filtering.
+
+**--trigger** *<trigger>*
+        Enable a trace event trigger to the previous **-e** *sys:event*.
+        If the *hist:* trigger is activated, the output histogram will be automatically saved to a file named *system_event_hist.txt*.
+        For example, the command:
+
+        rtla <command> <mode> -t -e osnoise:irq_noise --trigger="hist:key=desc,duration/1000:sort=desc,duration/1000:vals=hitcount"
+
+        Will automatically save the content of the histogram associated to *osnoise:irq_noise* event in *osnoise_irq_noise_hist.txt*.
+
+        For further information about event trigger see https://www.kernel.org/doc/html/latest/trace/events.html#event-triggers.
+
+**-P**, **--priority** *o:prio|r:prio|f:prio|d:runtime:period*
+
+        Set scheduling parameters to the osnoise tracer threads, the format to set the priority are:
+
+        - *o:prio* - use SCHED_OTHER with *prio*;
+        - *r:prio* - use SCHED_RR with *prio*;
+        - *f:prio* - use SCHED_FIFO with *prio*;
+        - *d:runtime[us|ms|s]:period[us|ms|s]* - use SCHED_DEADLINE with *runtime* and *period* in nanoseconds.
+
+**-C**, **--cgroup**\[*=cgroup*]
+
+        Set a *cgroup* to the tracer's threads. If the **-C** option is passed without arguments, the tracer's thread will inherit **rtla**'s *cgroup*. Otherwise, the threads will be placed on the *cgroup* passed to the option.
+
+**--warm-up** *s*
+
+        After starting the workload, let it run for *s* seconds before starting collecting the data, allowing the system to warm-up. Statistical data generated during warm-up is discarded.
+
+**--trace-buffer-size** *kB*
+        Set the per-cpu trace buffer size in kB for the tracing output.
+
+**--on-threshold** *action*
+
+        Defines an action to be executed when tracing is stopped on a latency threshold
+        specified by |threshold|.
+
+        Multiple --on-threshold actions may be specified, and they will be executed in
+        the order they are provided. If any action fails, subsequent actions in the list
+        will not be executed.
+
+        Supported actions are:
+
+        - *trace[,file=<filename>]*
+
+          Saves trace output, optionally taking a filename. Alternative to -t/--trace.
+          Note that nlike -t/--trace, specifying this multiple times will result in
+          the trace being saved multiple times.
+
+        - *signal,num=<sig>,pid=<pid>*
+
+          Sends signal to process. "parent" might be specified in place of pid to target
+          the parent process of rtla.
+
+        - *shell,command=<command>*
+
+          Execute shell command.
+
+        - *continue*
+
+          Continue tracing after actions are executed instead of stopping.
+
+        Example:
+
+        $ rtla |tool| |thresharg| 20 --on-threshold trace
+        --on-threshold shell,command="grep ipi_send |tracer|\_trace.txt"
+        --on-threshold signal,num=2,pid=parent
+
+        This will save a trace with the default filename "|tracer|\_trace.txt", print its
+        lines that contain the text "ipi_send" on standard output, and send signal 2
+        (SIGINT) to the parent process.
+
+        Performance Considerations:
+
+        |actionsperf|
+
+**--on-end** *action*
+
+        Defines an action to be executed at the end of tracing.
+
+        Multiple --on-end actions can be specified, and they will be executed in the order
+        they are provided. If any action fails, subsequent actions in the list will not be
+        executed.
+
+        See the documentation for **--on-threshold** for the list of supported actions, with
+        the exception that *continue* has no effect.
+
+        Example:
+
+        $ rtla |tool| -d 5s --on-end trace
+
+        This runs rtla with the default options, and saves trace output at the end.
+
+**-h**, **--help**
+
+        Print help menu.
diff --git a/Documentation/tools/rtla/common_osnoise_description.rst b/Documentation/tools/rtla/common_osnoise_description.rst
deleted file mode 100644
index d5d61615b967..000000000000
--- a/Documentation/tools/rtla/common_osnoise_description.rst
+++ /dev/null
@@ -1,8 +0,0 @@
-The **rtla osnoise** tool is an interface for the *osnoise* tracer. The
-*osnoise* tracer dispatches a kernel thread per-cpu. These threads read the
-time in a loop while with preemption, softirq and IRQs enabled, thus
-allowing all the sources of operating system noise during its execution.
-The *osnoise*'s tracer threads take note of the delta between each time
-read, along with an interference counter of all sources of interference.
-At the end of each period, the *osnoise* tracer displays a summary of
-the results.
diff --git a/Documentation/tools/rtla/common_osnoise_description.txt b/Documentation/tools/rtla/common_osnoise_description.txt
new file mode 100644
index 000000000000..d5d61615b967
--- /dev/null
+++ b/Documentation/tools/rtla/common_osnoise_description.txt
@@ -0,0 +1,8 @@
+The **rtla osnoise** tool is an interface for the *osnoise* tracer. The
+*osnoise* tracer dispatches a kernel thread per-cpu. These threads read the
+time in a loop while with preemption, softirq and IRQs enabled, thus
+allowing all the sources of operating system noise during its execution.
+The *osnoise*'s tracer threads take note of the delta between each time
+read, along with an interference counter of all sources of interference.
+At the end of each period, the *osnoise* tracer displays a summary of
+the results.
diff --git a/Documentation/tools/rtla/common_osnoise_options.rst b/Documentation/tools/rtla/common_osnoise_options.rst
deleted file mode 100644
index bd3c4f499193..000000000000
--- a/Documentation/tools/rtla/common_osnoise_options.rst
+++ /dev/null
@@ -1,39 +0,0 @@
-.. |threshold|  replace:: **-a/--auto**, **-s/--stop**, or **-S/--stop-total**
-.. |thresharg|  replace:: -s
-.. |tracer|     replace:: osnoise
-
-.. |actionsperf| replace::
-        Due to implementational limitations, actions might be delayed
-        up to one second after tracing is stopped.
-
-**-a**, **--auto** *us*
-
-        Set the automatic trace mode. This mode sets some commonly used options
-        while debugging the system. It is equivalent to use **-s** *us* **-T 1 -t**.
-
-**-p**, **--period** *us*
-
-        Set the *osnoise* tracer period in microseconds.
-
-**-r**, **--runtime** *us*
-
-        Set the *osnoise* tracer runtime in microseconds.
-
-**-s**, **--stop** *us*
-
-        Stop the trace if a single sample is higher than the argument in microseconds.
-        If **-T** is set, it will also save the trace to the output.
-
-**-S**, **--stop-total** *us*
-
-        Stop the trace if the total sample is higher than the argument in microseconds.
-        If **-T** is set, it will also save the trace to the output.
-
-**-T**, **--threshold** *us*
-
-        Specify the minimum delta between two time reads to be considered noise.
-        The default threshold is *5 us*.
-
-**-t**, **--trace** \[*file*]
-
-        Save the stopped trace to [*file|osnoise_trace.txt*].
diff --git a/Documentation/tools/rtla/common_osnoise_options.txt b/Documentation/tools/rtla/common_osnoise_options.txt
new file mode 100644
index 000000000000..bd3c4f499193
--- /dev/null
+++ b/Documentation/tools/rtla/common_osnoise_options.txt
@@ -0,0 +1,39 @@
+.. |threshold|  replace:: **-a/--auto**, **-s/--stop**, or **-S/--stop-total**
+.. |thresharg|  replace:: -s
+.. |tracer|     replace:: osnoise
+
+.. |actionsperf| replace::
+        Due to implementational limitations, actions might be delayed
+        up to one second after tracing is stopped.
+
+**-a**, **--auto** *us*
+
+        Set the automatic trace mode. This mode sets some commonly used options
+        while debugging the system. It is equivalent to use **-s** *us* **-T 1 -t**.
+
+**-p**, **--period** *us*
+
+        Set the *osnoise* tracer period in microseconds.
+
+**-r**, **--runtime** *us*
+
+        Set the *osnoise* tracer runtime in microseconds.
+
+**-s**, **--stop** *us*
+
+        Stop the trace if a single sample is higher than the argument in microseconds.
+        If **-T** is set, it will also save the trace to the output.
+
+**-S**, **--stop-total** *us*
+
+        Stop the trace if the total sample is higher than the argument in microseconds.
+        If **-T** is set, it will also save the trace to the output.
+
+**-T**, **--threshold** *us*
+
+        Specify the minimum delta between two time reads to be considered noise.
+        The default threshold is *5 us*.
+
+**-t**, **--trace** \[*file*]
+
+        Save the stopped trace to [*file|osnoise_trace.txt*].
diff --git a/Documentation/tools/rtla/common_timerlat_aa.rst b/Documentation/tools/rtla/common_timerlat_aa.rst
deleted file mode 100644
index 077029e6b289..000000000000
--- a/Documentation/tools/rtla/common_timerlat_aa.rst
+++ /dev/null
@@ -1,7 +0,0 @@
-**--dump-tasks**
-
-        prints the task running on all CPUs if stop conditions are met (depends on !--no-aa)
-
-**--no-aa**
-
-        disable auto-analysis, reducing rtla timerlat cpu usage
diff --git a/Documentation/tools/rtla/common_timerlat_aa.txt b/Documentation/tools/rtla/common_timerlat_aa.txt
new file mode 100644
index 000000000000..077029e6b289
--- /dev/null
+++ b/Documentation/tools/rtla/common_timerlat_aa.txt
@@ -0,0 +1,7 @@
+**--dump-tasks**
+
+        prints the task running on all CPUs if stop conditions are met (depends on !--no-aa)
+
+**--no-aa**
+
+        disable auto-analysis, reducing rtla timerlat cpu usage
diff --git a/Documentation/tools/rtla/common_timerlat_description.rst b/Documentation/tools/rtla/common_timerlat_description.rst
deleted file mode 100644
index 49fcae3ffdec..000000000000
--- a/Documentation/tools/rtla/common_timerlat_description.rst
+++ /dev/null
@@ -1,18 +0,0 @@
-The **rtla timerlat** tool is an interface for the *timerlat* tracer. The
-*timerlat* tracer dispatches a kernel thread per-cpu. These threads
-set a periodic timer to wake themselves up and go back to sleep. After
-the wakeup, they collect and generate useful information for the
-debugging of operating system timer latency.
-
-The *timerlat* tracer outputs information in two ways. It periodically
-prints the timer latency at the timer *IRQ* handler and the *Thread*
-handler. It also enables the trace of the most relevant information via
-**osnoise:** tracepoints.
-
-The **rtla timerlat** tool sets the options of the *timerlat* tracer
-and collects and displays a summary of the results. By default,
-the collection is done synchronously in kernel space using a dedicated
-BPF program attached to the *timerlat* tracer. If either BPF or
-the **osnoise:timerlat_sample** tracepoint it attaches to is
-unavailable, the **rtla timerlat** tool falls back to using tracefs to
-process the data asynchronously in user space.
diff --git a/Documentation/tools/rtla/common_timerlat_description.txt b/Documentation/tools/rtla/common_timerlat_description.txt
new file mode 100644
index 000000000000..49fcae3ffdec
--- /dev/null
+++ b/Documentation/tools/rtla/common_timerlat_description.txt
@@ -0,0 +1,18 @@
+The **rtla timerlat** tool is an interface for the *timerlat* tracer. The
+*timerlat* tracer dispatches a kernel thread per-cpu. These threads
+set a periodic timer to wake themselves up and go back to sleep. After
+the wakeup, they collect and generate useful information for the
+debugging of operating system timer latency.
+
+The *timerlat* tracer outputs information in two ways. It periodically
+prints the timer latency at the timer *IRQ* handler and the *Thread*
+handler. It also enables the trace of the most relevant information via
+**osnoise:** tracepoints.
+
+The **rtla timerlat** tool sets the options of the *timerlat* tracer
+and collects and displays a summary of the results. By default,
+the collection is done synchronously in kernel space using a dedicated
+BPF program attached to the *timerlat* tracer. If either BPF or
+the **osnoise:timerlat_sample** tracepoint it attaches to is
+unavailable, the **rtla timerlat** tool falls back to using tracefs to
+process the data asynchronously in user space.
diff --git a/Documentation/tools/rtla/common_timerlat_options.rst b/Documentation/tools/rtla/common_timerlat_options.rst
deleted file mode 100644
index 1f5d024b53aa..000000000000
--- a/Documentation/tools/rtla/common_timerlat_options.rst
+++ /dev/null
@@ -1,67 +0,0 @@
-.. |threshold|  replace:: **-a/--auto**, **-i/--irq**, or **-T/--thread**
-.. |thresharg|  replace:: -T
-.. |tracer|     replace:: timerlat
-
-.. |actionsperf| replace::
-        For time-sensitive actions, it is recommended to run **rtla timerlat** with BPF
-        support and RT priority. Note that due to implementational limitations, actions
-        might be delayed up to one second after tracing is stopped if BPF mode is not
-        available or disabled.
-
-**-a**, **--auto** *us*
-
-        Set the automatic trace mode. This mode sets some commonly used options
-        while debugging the system. It is equivalent to use **-T** *us* **-s** *us*
-        **-t**. By default, *timerlat* tracer uses FIFO:95 for *timerlat* threads,
-        thus equilavent to **-P** *f:95*.
-
-**-p**, **--period** *us*
-
-        Set the *timerlat* tracer period in microseconds.
-
-**-i**, **--irq** *us*
-
-        Stop trace if the *IRQ* latency is higher than the argument in us.
-
-**-T**, **--thread** *us*
-
-        Stop trace if the *Thread* latency is higher than the argument in us.
-
-**-s**, **--stack** *us*
-
-        Save the stack trace at the *IRQ* if a *Thread* latency is higher than the
-        argument in us.
-
-**-t**, **--trace** \[*file*]
-
-        Save the stopped trace to [*file|timerlat_trace.txt*].
-
-**--dma-latency** *us*
-        Set the /dev/cpu_dma_latency to *us*, aiming to bound exit from idle latencies.
-        *cyclictest* sets this value to *0* by default, use **--dma-latency** *0* to have
-        similar results.
-
-**--deepest-idle-state** *n*
-        Disable idle states higher than *n* for cpus that are running timerlat threads to
-        reduce exit from idle latencies. If *n* is -1, all idle states are disabled.
-        On exit from timerlat, the idle state setting is restored to its original state
-        before running timerlat.
-
-        Requires rtla to be built with libcpupower.
-
-**-k**, **--kernel-threads**
-
-        Use timerlat kernel-space threads, in contrast of **-u**.
-
-**-u**, **--user-threads**
-
-        Set timerlat to run without a workload, and then dispatches user-space workloads
-        to wait on the timerlat_fd. Once the workload is awakes, it goes to sleep again
-        adding so the measurement for the kernel-to-user and user-to-kernel to the tracer
-        output. **--user-threads** will be used unless the user specify **-k**.
-
-**-U**, **--user-load**
-
-        Set timerlat to run without workload, waiting for the user to dispatch a per-cpu
-        task that waits for a new period on the tracing/osnoise/per_cpu/cpu$ID/timerlat_fd.
-        See linux/tools/rtla/sample/timerlat_load.py for an example of user-load code.
diff --git a/Documentation/tools/rtla/common_timerlat_options.txt b/Documentation/tools/rtla/common_timerlat_options.txt
new file mode 100644
index 000000000000..1f5d024b53aa
--- /dev/null
+++ b/Documentation/tools/rtla/common_timerlat_options.txt
@@ -0,0 +1,67 @@
+.. |threshold|  replace:: **-a/--auto**, **-i/--irq**, or **-T/--thread**
+.. |thresharg|  replace:: -T
+.. |tracer|     replace:: timerlat
+
+.. |actionsperf| replace::
+        For time-sensitive actions, it is recommended to run **rtla timerlat** with BPF
+        support and RT priority. Note that due to implementational limitations, actions
+        might be delayed up to one second after tracing is stopped if BPF mode is not
+        available or disabled.
+
+**-a**, **--auto** *us*
+
+        Set the automatic trace mode. This mode sets some commonly used options
+        while debugging the system. It is equivalent to use **-T** *us* **-s** *us*
+        **-t**. By default, *timerlat* tracer uses FIFO:95 for *timerlat* threads,
+        thus equilavent to **-P** *f:95*.
+
+**-p**, **--period** *us*
+
+        Set the *timerlat* tracer period in microseconds.
+
+**-i**, **--irq** *us*
+
+        Stop trace if the *IRQ* latency is higher than the argument in us.
+
+**-T**, **--thread** *us*
+
+        Stop trace if the *Thread* latency is higher than the argument in us.
+
+**-s**, **--stack** *us*
+
+        Save the stack trace at the *IRQ* if a *Thread* latency is higher than the
+        argument in us.
+
+**-t**, **--trace** \[*file*]
+
+        Save the stopped trace to [*file|timerlat_trace.txt*].
+
+**--dma-latency** *us*
+        Set the /dev/cpu_dma_latency to *us*, aiming to bound exit from idle latencies.
+        *cyclictest* sets this value to *0* by default, use **--dma-latency** *0* to have
+        similar results.
+
+**--deepest-idle-state** *n*
+        Disable idle states higher than *n* for cpus that are running timerlat threads to
+        reduce exit from idle latencies. If *n* is -1, all idle states are disabled.
+        On exit from timerlat, the idle state setting is restored to its original state
+        before running timerlat.
+
+        Requires rtla to be built with libcpupower.
+
+**-k**, **--kernel-threads**
+
+        Use timerlat kernel-space threads, in contrast of **-u**.
+
+**-u**, **--user-threads**
+
+        Set timerlat to run without a workload, and then dispatches user-space workloads
+        to wait on the timerlat_fd. Once the workload is awakes, it goes to sleep again
+        adding so the measurement for the kernel-to-user and user-to-kernel to the tracer
+        output. **--user-threads** will be used unless the user specify **-k**.
+
+**-U**, **--user-load**
+
+        Set timerlat to run without workload, waiting for the user to dispatch a per-cpu
+        task that waits for a new period on the tracing/osnoise/per_cpu/cpu$ID/timerlat_fd.
+        See linux/tools/rtla/sample/timerlat_load.py for an example of user-load code.
diff --git a/Documentation/tools/rtla/common_top_options.rst b/Documentation/tools/rtla/common_top_options.rst
deleted file mode 100644
index f48878938f84..000000000000
--- a/Documentation/tools/rtla/common_top_options.rst
+++ /dev/null
@@ -1,3 +0,0 @@
-**-q**, **--quiet**
-
-        Print only a summary at the end of the session.
diff --git a/Documentation/tools/rtla/common_top_options.txt b/Documentation/tools/rtla/common_top_options.txt
new file mode 100644
index 000000000000..f48878938f84
--- /dev/null
+++ b/Documentation/tools/rtla/common_top_options.txt
@@ -0,0 +1,3 @@
+**-q**, **--quiet**
+
+        Print only a summary at the end of the session.
diff --git a/Documentation/tools/rtla/rtla-hwnoise.rst b/Documentation/tools/rtla/rtla-hwnoise.rst
index 3a7163c02ac8..26512b15fe7b 100644
--- a/Documentation/tools/rtla/rtla-hwnoise.rst
+++ b/Documentation/tools/rtla/rtla-hwnoise.rst
@@ -29,11 +29,11 @@ collection of the tracer output.
 
 OPTIONS
 =======
-.. include:: common_osnoise_options.rst
+.. include:: common_osnoise_options.txt
 
-.. include:: common_top_options.rst
+.. include:: common_top_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
 EXAMPLE
 =======
@@ -106,4 +106,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git a/Documentation/tools/rtla/rtla-osnoise-hist.rst b/Documentation/tools/rtla/rtla-osnoise-hist.rst
index 1fc60ef26106..007521c865d9 100644
--- a/Documentation/tools/rtla/rtla-osnoise-hist.rst
+++ b/Documentation/tools/rtla/rtla-osnoise-hist.rst
@@ -15,7 +15,7 @@ SYNOPSIS
 
 DESCRIPTION
 ===========
-.. include:: common_osnoise_description.rst
+.. include:: common_osnoise_description.txt
 
 The **rtla osnoise hist** tool collects all **osnoise:sample_threshold**
 occurrence in a histogram, displaying the results in a user-friendly way.
@@ -24,11 +24,11 @@ collection of the tracer output.
 
 OPTIONS
 =======
-.. include:: common_osnoise_options.rst
+.. include:: common_osnoise_options.txt
 
-.. include:: common_hist_options.rst
+.. include:: common_hist_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
 EXAMPLE
 =======
@@ -65,4 +65,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git a/Documentation/tools/rtla/rtla-osnoise-top.rst b/Documentation/tools/rtla/rtla-osnoise-top.rst
index b1cbd7bcd4ae..6ccadae38945 100644
--- a/Documentation/tools/rtla/rtla-osnoise-top.rst
+++ b/Documentation/tools/rtla/rtla-osnoise-top.rst
@@ -15,7 +15,7 @@ SYNOPSIS
 
 DESCRIPTION
 ===========
-.. include:: common_osnoise_description.rst
+.. include:: common_osnoise_description.txt
 
 **rtla osnoise top** collects the periodic summary from the *osnoise* tracer,
 including the counters of the occurrence of the interference source,
@@ -26,11 +26,11 @@ collection of the tracer output.
 
 OPTIONS
 =======
-.. include:: common_osnoise_options.rst
+.. include:: common_osnoise_options.txt
 
-.. include:: common_top_options.rst
+.. include:: common_top_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
 EXAMPLE
 =======
@@ -60,4 +60,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git a/Documentation/tools/rtla/rtla-osnoise.rst b/Documentation/tools/rtla/rtla-osnoise.rst
index c129b206ce34..540d2bf6c152 100644
--- a/Documentation/tools/rtla/rtla-osnoise.rst
+++ b/Documentation/tools/rtla/rtla-osnoise.rst
@@ -14,7 +14,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_osnoise_description.rst
+.. include:: common_osnoise_description.txt
 
 The *osnoise* tracer outputs information in two ways. It periodically prints
 a summary of the noise of the operating system, including the counters of
@@ -56,4 +56,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst
index 4923a362129b..f56fe546411b 100644
--- a/Documentation/tools/rtla/rtla-timerlat-hist.rst
+++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst
@@ -16,7 +16,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_timerlat_description.rst
+.. include:: common_timerlat_description.txt
 
 The **rtla timerlat hist** displays a histogram of each tracer event
 occurrence. This tool uses the periodic information, and the
@@ -25,13 +25,13 @@ occurrence. This tool uses the periodic information, and the
 OPTIONS
 =======
 
-.. include:: common_timerlat_options.rst
+.. include:: common_timerlat_options.txt
 
-.. include:: common_hist_options.rst
+.. include:: common_hist_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
-.. include:: common_timerlat_aa.rst
+.. include:: common_timerlat_aa.txt
 
 EXAMPLE
 =======
@@ -110,4 +110,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git a/Documentation/tools/rtla/rtla-timerlat-top.rst b/Documentation/tools/rtla/rtla-timerlat-top.rst
index 50968cdd2095..7dbe625d0c42 100644
--- a/Documentation/tools/rtla/rtla-timerlat-top.rst
+++ b/Documentation/tools/rtla/rtla-timerlat-top.rst
@@ -16,7 +16,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_timerlat_description.rst
+.. include:: common_timerlat_description.txt
 
 The **rtla timerlat top** displays a summary of the periodic output
 from the *timerlat* tracer. It also provides information for each
@@ -26,13 +26,13 @@ seem with the option **-T**.
 OPTIONS
 =======
 
-.. include:: common_timerlat_options.rst
+.. include:: common_timerlat_options.txt
 
-.. include:: common_top_options.rst
+.. include:: common_top_options.txt
 
-.. include:: common_options.rst
+.. include:: common_options.txt
 
-.. include:: common_timerlat_aa.rst
+.. include:: common_timerlat_aa.txt
 
 **--aa-only** *us*
 
@@ -133,4 +133,4 @@ AUTHOR
 ------
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git a/Documentation/tools/rtla/rtla-timerlat.rst b/Documentation/tools/rtla/rtla-timerlat.rst
index 20e2d259467f..ce9f57e038c3 100644
--- a/Documentation/tools/rtla/rtla-timerlat.rst
+++ b/Documentation/tools/rtla/rtla-timerlat.rst
@@ -14,7 +14,7 @@ SYNOPSIS
 DESCRIPTION
 ===========
 
-.. include:: common_timerlat_description.rst
+.. include:: common_timerlat_description.txt
 
 The **rtla timerlat top** mode displays a summary of the periodic output
 from the *timerlat* tracer. The **rtla timerlat hist** mode displays
@@ -51,4 +51,4 @@ AUTHOR
 ======
 Written by Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git a/Documentation/tools/rtla/rtla.rst b/Documentation/tools/rtla/rtla.rst
index fc0d233efcd5..2a5fb7004ad4 100644
--- a/Documentation/tools/rtla/rtla.rst
+++ b/Documentation/tools/rtla/rtla.rst
@@ -45,4 +45,4 @@ AUTHOR
 ======
 Daniel Bristot de Oliveira <bristot@kernel.org>
 
-.. include:: common_appendix.rst
+.. include:: common_appendix.txt
diff --git a/Makefile b/Makefile
index a082a1d7c7d9..23cc6c39819b 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 18
-SUBLEVEL = 0
+SUBLEVEL = 1
 EXTRAVERSION =
 NAME = Baby Opossum Posse
 
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 48598d017d6f..974d64bf0a4d 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -2143,6 +2143,11 @@ u64 vcpu_tsc_khz(struct kvm_vcpu *vcpu);
  *			     the gfn, i.e. retrying the instruction will hit a
  *			     !PRESENT fault, which results in a new shadow page
  *			     and sends KVM back to square one.
+ *
+ * EMULTYPE_SKIP_SOFT_INT - Set in combination with EMULTYPE_SKIP to only skip
+ *                          an instruction if it could generate a given software
+ *                          interrupt, which must be encoded via
+ *                          EMULTYPE_SET_SOFT_INT_VECTOR().
  */
 #define EMULTYPE_NO_DECODE	    (1 << 0)
 #define EMULTYPE_TRAP_UD	    (1 << 1)
@@ -2153,6 +2158,10 @@ u64 vcpu_tsc_khz(struct kvm_vcpu *vcpu);
 #define EMULTYPE_PF		    (1 << 6)
 #define EMULTYPE_COMPLETE_USER_EXIT (1 << 7)
 #define EMULTYPE_WRITE_PF_TO_SP	    (1 << 8)
+#define EMULTYPE_SKIP_SOFT_INT	    (1 << 9)
+
+#define EMULTYPE_SET_SOFT_INT_VECTOR(v)	((u32)((v) & 0xff) << 16)
+#define EMULTYPE_GET_SOFT_INT_VECTOR(e)	(((e) >> 16) & 0xff)
 
 static inline bool kvm_can_emulate_event_vectoring(int emul_type)
 {
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 9d29b2e7e855..f2fa69dd5cc7 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -272,6 +272,7 @@ static void svm_set_interrupt_shadow(struct kvm_vcpu *vcpu, int mask)
 }
 
 static int __svm_skip_emulated_instruction(struct kvm_vcpu *vcpu,
+					   int emul_type,
 					   bool commit_side_effects)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -293,7 +294,7 @@ static int __svm_skip_emulated_instruction(struct kvm_vcpu *vcpu,
 		if (unlikely(!commit_side_effects))
 			old_rflags = svm->vmcb->save.rflags;
 
-		if (!kvm_emulate_instruction(vcpu, EMULTYPE_SKIP))
+		if (!kvm_emulate_instruction(vcpu, emul_type))
 			return 0;
 
 		if (unlikely(!commit_side_effects))
@@ -311,11 +312,13 @@ static int __svm_skip_emulated_instruction(struct kvm_vcpu *vcpu,
 
 static int svm_skip_emulated_instruction(struct kvm_vcpu *vcpu)
 {
-	return __svm_skip_emulated_instruction(vcpu, true);
+	return __svm_skip_emulated_instruction(vcpu, EMULTYPE_SKIP, true);
 }
 
-static int svm_update_soft_interrupt_rip(struct kvm_vcpu *vcpu)
+static int svm_update_soft_interrupt_rip(struct kvm_vcpu *vcpu, u8 vector)
 {
+	const int emul_type = EMULTYPE_SKIP | EMULTYPE_SKIP_SOFT_INT |
+			      EMULTYPE_SET_SOFT_INT_VECTOR(vector);
 	unsigned long rip, old_rip = kvm_rip_read(vcpu);
 	struct vcpu_svm *svm = to_svm(vcpu);
 
@@ -331,7 +334,7 @@ static int svm_update_soft_interrupt_rip(struct kvm_vcpu *vcpu)
 	 * in use, the skip must not commit any side effects such as clearing
 	 * the interrupt shadow or RFLAGS.RF.
 	 */
-	if (!__svm_skip_emulated_instruction(vcpu, !nrips))
+	if (!__svm_skip_emulated_instruction(vcpu, emul_type, !nrips))
 		return -EIO;
 
 	rip = kvm_rip_read(vcpu);
@@ -367,7 +370,7 @@ static void svm_inject_exception(struct kvm_vcpu *vcpu)
 	kvm_deliver_exception_payload(vcpu, ex);
 
 	if (kvm_exception_is_soft(ex->vector) &&
-	    svm_update_soft_interrupt_rip(vcpu))
+	    svm_update_soft_interrupt_rip(vcpu, ex->vector))
 		return;
 
 	svm->vmcb->control.event_inj = ex->vector
@@ -3633,11 +3636,12 @@ static bool svm_set_vnmi_pending(struct kvm_vcpu *vcpu)
 
 static void svm_inject_irq(struct kvm_vcpu *vcpu, bool reinjected)
 {
+	struct kvm_queued_interrupt *intr = &vcpu->arch.interrupt;
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u32 type;
 
-	if (vcpu->arch.interrupt.soft) {
-		if (svm_update_soft_interrupt_rip(vcpu))
+	if (intr->soft) {
+		if (svm_update_soft_interrupt_rip(vcpu, intr->nr))
 			return;
 
 		type = SVM_EVTINJ_TYPE_SOFT;
@@ -3645,12 +3649,10 @@ static void svm_inject_irq(struct kvm_vcpu *vcpu, bool reinjected)
 		type = SVM_EVTINJ_TYPE_INTR;
 	}
 
-	trace_kvm_inj_virq(vcpu->arch.interrupt.nr,
-			   vcpu->arch.interrupt.soft, reinjected);
+	trace_kvm_inj_virq(intr->nr, intr->soft, reinjected);
 	++vcpu->stat.irq_injections;
 
-	svm->vmcb->control.event_inj = vcpu->arch.interrupt.nr |
-				       SVM_EVTINJ_VALID | type;
+	svm->vmcb->control.event_inj = intr->nr | SVM_EVTINJ_VALID | type;
 }
 
 void svm_complete_interrupt_delivery(struct kvm_vcpu *vcpu, int delivery_mode,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index c9c2aa6f4705..e6f2e34ec97d 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9337,6 +9337,23 @@ static bool is_vmware_backdoor_opcode(struct x86_emulate_ctxt *ctxt)
 	return false;
 }
 
+static bool is_soft_int_instruction(struct x86_emulate_ctxt *ctxt,
+				    int emulation_type)
+{
+	u8 vector = EMULTYPE_GET_SOFT_INT_VECTOR(emulation_type);
+
+	switch (ctxt->b) {
+	case 0xcc:
+		return vector == BP_VECTOR;
+	case 0xcd:
+		return vector == ctxt->src.val;
+	case 0xce:
+		return vector == OF_VECTOR;
+	default:
+		return false;
+	}
+}
+
 /*
  * Decode an instruction for emulation.  The caller is responsible for handling
  * code breakpoints.  Note, manually detecting code breakpoints is unnecessary
@@ -9447,6 +9464,10 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 	 * injecting single-step #DBs.
 	 */
 	if (emulation_type & EMULTYPE_SKIP) {
+		if (emulation_type & EMULTYPE_SKIP_SOFT_INT &&
+		    !is_soft_int_instruction(ctxt, emulation_type))
+			return 0;
+
 		if (ctxt->mode != X86EMUL_MODE_PROT64)
 			ctxt->eip = (u32)ctxt->_eip;
 		else
diff --git a/crypto/zstd.c b/crypto/zstd.c
index ac318d333b68..32a339b74f34 100644
--- a/crypto/zstd.c
+++ b/crypto/zstd.c
@@ -75,11 +75,6 @@ static int zstd_init(struct crypto_acomp *acomp_tfm)
 	return ret;
 }
 
-static void zstd_exit(struct crypto_acomp *acomp_tfm)
-{
-	crypto_acomp_free_streams(&zstd_streams);
-}
-
 static int zstd_compress_one(struct acomp_req *req, struct zstd_ctx *ctx,
 			     const void *src, void *dst, unsigned int *dlen)
 {
@@ -297,7 +292,6 @@ static struct acomp_alg zstd_acomp = {
 		.cra_module = THIS_MODULE,
 	},
 	.init = zstd_init,
-	.exit = zstd_exit,
 	.compress = zstd_compress,
 	.decompress = zstd_decompress,
 };
@@ -310,6 +304,7 @@ static int __init zstd_mod_init(void)
 static void __exit zstd_mod_fini(void)
 {
 	crypto_unregister_acomp(&zstd_acomp);
+	crypto_acomp_free_streams(&zstd_streams);
 }
 
 module_init(zstd_mod_init);
diff --git a/drivers/android/binder/node.rs b/drivers/android/binder/node.rs
index 08d362deaf61..c26d113ede96 100644
--- a/drivers/android/binder/node.rs
+++ b/drivers/android/binder/node.rs
@@ -541,10 +541,10 @@ pub(crate) fn release(&self) {
             guard = self.owner.inner.lock();
         }
 
-        let death_list = core::mem::take(&mut self.inner.access_mut(&mut guard).death_list);
-        drop(guard);
-        for death in death_list {
+        while let Some(death) = self.inner.access_mut(&mut guard).death_list.pop_front() {
+            drop(guard);
             death.into_arc().set_dead();
+            guard = self.owner.inner.lock();
         }
     }
 
diff --git a/drivers/comedi/comedi_fops.c b/drivers/comedi/comedi_fops.c
index 7e2f2b1a1c36..b2e62e04afd9 100644
--- a/drivers/comedi/comedi_fops.c
+++ b/drivers/comedi/comedi_fops.c
@@ -3023,7 +3023,12 @@ static int compat_chaninfo(struct file *file, unsigned long arg)
 	chaninfo.rangelist = compat_ptr(chaninfo32.rangelist);
 
 	mutex_lock(&dev->mutex);
-	err = do_chaninfo_ioctl(dev, &chaninfo);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		err = -ENODEV;
+	} else {
+		err = do_chaninfo_ioctl(dev, &chaninfo);
+	}
 	mutex_unlock(&dev->mutex);
 	return err;
 }
@@ -3044,7 +3049,12 @@ static int compat_rangeinfo(struct file *file, unsigned long arg)
 	rangeinfo.range_ptr = compat_ptr(rangeinfo32.range_ptr);
 
 	mutex_lock(&dev->mutex);
-	err = do_rangeinfo_ioctl(dev, &rangeinfo);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		err = -ENODEV;
+	} else {
+		err = do_rangeinfo_ioctl(dev, &rangeinfo);
+	}
 	mutex_unlock(&dev->mutex);
 	return err;
 }
@@ -3120,7 +3130,12 @@ static int compat_cmd(struct file *file, unsigned long arg)
 		return rc;
 
 	mutex_lock(&dev->mutex);
-	rc = do_cmd_ioctl(dev, &cmd, &copy, file);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		rc = -ENODEV;
+	} else {
+		rc = do_cmd_ioctl(dev, &cmd, &copy, file);
+	}
 	mutex_unlock(&dev->mutex);
 	if (copy) {
 		/* Special case: copy cmd back to user. */
@@ -3145,7 +3160,12 @@ static int compat_cmdtest(struct file *file, unsigned long arg)
 		return rc;
 
 	mutex_lock(&dev->mutex);
-	rc = do_cmdtest_ioctl(dev, &cmd, &copy, file);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		rc = -ENODEV;
+	} else {
+		rc = do_cmdtest_ioctl(dev, &cmd, &copy, file);
+	}
 	mutex_unlock(&dev->mutex);
 	if (copy) {
 		err = put_compat_cmd(compat_ptr(arg), &cmd);
@@ -3205,7 +3225,12 @@ static int compat_insnlist(struct file *file, unsigned long arg)
 	}
 
 	mutex_lock(&dev->mutex);
-	rc = do_insnlist_ioctl(dev, insns, insnlist32.n_insns, file);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		rc = -ENODEV;
+	} else {
+		rc = do_insnlist_ioctl(dev, insns, insnlist32.n_insns, file);
+	}
 	mutex_unlock(&dev->mutex);
 	kfree(insns);
 	return rc;
@@ -3224,7 +3249,12 @@ static int compat_insn(struct file *file, unsigned long arg)
 		return rc;
 
 	mutex_lock(&dev->mutex);
-	rc = do_insn_ioctl(dev, &insn, file);
+	if (!dev->attached) {
+		dev_dbg(dev->class_dev, "no driver attached\n");
+		rc = -ENODEV;
+	} else {
+		rc = do_insn_ioctl(dev, &insn, file);
+	}
 	mutex_unlock(&dev->mutex);
 	return rc;
 }
diff --git a/drivers/comedi/drivers/c6xdigio.c b/drivers/comedi/drivers/c6xdigio.c
index 14b90d1c64dc..8a38d97d463b 100644
--- a/drivers/comedi/drivers/c6xdigio.c
+++ b/drivers/comedi/drivers/c6xdigio.c
@@ -249,9 +249,6 @@ static int c6xdigio_attach(struct comedi_device *dev,
 	if (ret)
 		return ret;
 
-	/*  Make sure that PnP ports get activated */
-	pnp_register_driver(&c6xdigio_pnp_driver);
-
 	s = &dev->subdevices[0];
 	/* pwm output subdevice */
 	s->type		= COMEDI_SUBD_PWM;
@@ -278,19 +275,46 @@ static int c6xdigio_attach(struct comedi_device *dev,
 	return 0;
 }
 
-static void c6xdigio_detach(struct comedi_device *dev)
-{
-	comedi_legacy_detach(dev);
-	pnp_unregister_driver(&c6xdigio_pnp_driver);
-}
-
 static struct comedi_driver c6xdigio_driver = {
 	.driver_name	= "c6xdigio",
 	.module		= THIS_MODULE,
 	.attach		= c6xdigio_attach,
-	.detach		= c6xdigio_detach,
+	.detach		= comedi_legacy_detach,
 };
-module_comedi_driver(c6xdigio_driver);
+
+static bool c6xdigio_pnp_registered = false;
+
+static int __init c6xdigio_module_init(void)
+{
+	int ret;
+
+	ret = comedi_driver_register(&c6xdigio_driver);
+	if (ret)
+		return ret;
+
+	if (IS_ENABLED(CONFIG_PNP)) {
+		/*  Try to activate the PnP ports */
+		ret = pnp_register_driver(&c6xdigio_pnp_driver);
+		if (ret) {
+			pr_warn("failed to register pnp driver - err %d\n",
+				ret);
+			ret = 0;	/* ignore the error. */
+		} else {
+			c6xdigio_pnp_registered = true;
+		}
+	}
+
+	return 0;
+}
+module_init(c6xdigio_module_init);
+
+static void __exit c6xdigio_module_exit(void)
+{
+	if (c6xdigio_pnp_registered)
+		pnp_unregister_driver(&c6xdigio_pnp_driver);
+	comedi_driver_unregister(&c6xdigio_driver);
+}
+module_exit(c6xdigio_module_exit);
 
 MODULE_AUTHOR("Comedi https://www.comedi.org");
 MODULE_DESCRIPTION("Comedi driver for the C6x_DIGIO DSP daughter card");
diff --git a/drivers/comedi/drivers/multiq3.c b/drivers/comedi/drivers/multiq3.c
index 07ff5383da99..ac369e9a262d 100644
--- a/drivers/comedi/drivers/multiq3.c
+++ b/drivers/comedi/drivers/multiq3.c
@@ -67,6 +67,11 @@
 #define MULTIQ3_TRSFRCNTR_OL		0x10	/* xfer CNTR to OL (x and y) */
 #define MULTIQ3_EFLAG_RESET		0x06	/* reset E bit of flag reg */
 
+/*
+ * Limit on the number of optional encoder channels
+ */
+#define MULTIQ3_MAX_ENC_CHANS		8
+
 static void multiq3_set_ctrl(struct comedi_device *dev, unsigned int bits)
 {
 	/*
@@ -312,6 +317,10 @@ static int multiq3_attach(struct comedi_device *dev,
 	s->insn_read	= multiq3_encoder_insn_read;
 	s->insn_config	= multiq3_encoder_insn_config;
 
+	/* sanity check for number of encoder channels */
+	if (s->n_chan > MULTIQ3_MAX_ENC_CHANS)
+		s->n_chan = MULTIQ3_MAX_ENC_CHANS;
+
 	for (i = 0; i < s->n_chan; i++)
 		multiq3_encoder_reset(dev, i);
 
diff --git a/drivers/comedi/drivers/pcl818.c b/drivers/comedi/drivers/pcl818.c
index 4127adcfb229..06fe06396f23 100644
--- a/drivers/comedi/drivers/pcl818.c
+++ b/drivers/comedi/drivers/pcl818.c
@@ -1111,10 +1111,9 @@ static void pcl818_detach(struct comedi_device *dev)
 {
 	struct pcl818_private *devpriv = dev->private;
 
-	if (devpriv) {
-		pcl818_ai_cancel(dev, dev->read_subdev);
+	if (devpriv)
 		pcl818_reset(dev);
-	}
+
 	pcl818_free_dma(dev);
 	comedi_legacy_detach(dev);
 }
diff --git a/drivers/iio/adc/ad4080.c b/drivers/iio/adc/ad4080.c
index 6e61787ed321..e15310fcd21a 100644
--- a/drivers/iio/adc/ad4080.c
+++ b/drivers/iio/adc/ad4080.c
@@ -125,7 +125,7 @@
 
 /* Miscellaneous Definitions */
 #define AD4080_SPI_READ						BIT(7)
-#define AD4080_CHIP_ID						GENMASK(2, 0)
+#define AD4080_CHIP_ID						0x0050
 
 #define AD4080_LVDS_CNV_CLK_CNT_MAX				7
 
@@ -445,7 +445,8 @@ static int ad4080_setup(struct iio_dev *indio_dev)
 {
 	struct ad4080_state *st = iio_priv(indio_dev);
 	struct device *dev = regmap_get_device(st->regmap);
-	unsigned int id;
+	__le16 id_le;
+	u16 id;
 	int ret;
 
 	ret = regmap_write(st->regmap, AD4080_REG_INTERFACE_CONFIG_A,
@@ -458,10 +459,12 @@ static int ad4080_setup(struct iio_dev *indio_dev)
 	if (ret)
 		return ret;
 
-	ret = regmap_read(st->regmap, AD4080_REG_CHIP_TYPE, &id);
+	ret = regmap_bulk_read(st->regmap, AD4080_REG_PRODUCT_ID_L, &id_le,
+			       sizeof(id_le));
 	if (ret)
 		return ret;
 
+	id = le16_to_cpu(id_le);
 	if (id != AD4080_CHIP_ID)
 		dev_info(dev, "Unrecognized CHIP_ID 0x%X\n", id);
 
diff --git a/drivers/net/wireless/realtek/rtl8xxxu/core.c b/drivers/net/wireless/realtek/rtl8xxxu/core.c
index 3ded5952729f..be39463bd6c4 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/core.c
@@ -8136,6 +8136,9 @@ static const struct usb_device_id dev_table[] = {
 /* TP-Link TL-WN823N V2 */
 {USB_DEVICE_AND_INTERFACE_INFO(0x2357, 0x0135, 0xff, 0xff, 0xff),
 	.driver_info = (unsigned long)&rtl8192fu_fops},
+/* D-Link AN3U rev. A1 */
+{USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3328, 0xff, 0xff, 0xff),
+	.driver_info = (unsigned long)&rtl8192fu_fops},
 #ifdef CONFIG_RTL8XXXU_UNTESTED
 /* Still supported by rtlwifi */
 {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8176, 0xff, 0xff, 0xff),
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822cu.c b/drivers/net/wireless/realtek/rtw88/rtw8822cu.c
index 324fd5c8bfd4..755f76840b12 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822cu.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822cu.c
@@ -21,6 +21,8 @@ static const struct usb_device_id rtw_8822cu_id_table[] = {
 	  .driver_info = (kernel_ulong_t)&(rtw8822c_hw_spec) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x13b1, 0x0043, 0xff, 0xff, 0xff),
 	  .driver_info = (kernel_ulong_t)&(rtw8822c_hw_spec) }, /* Alpha - Alpha */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2001, 0x3329, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&(rtw8822c_hw_spec) }, /* D-Link AC13U rev. A1 */
 	{},
 };
 MODULE_DEVICE_TABLE(usb, rtw_8822cu_id_table);
diff --git a/drivers/staging/rtl8723bs/core/rtw_ieee80211.c b/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
index 53d4c113b19c..df35c616e71f 100644
--- a/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
+++ b/drivers/staging/rtl8723bs/core/rtw_ieee80211.c
@@ -140,22 +140,24 @@ u8 *rtw_get_ie(u8 *pbuf, signed int index, signed int *len, signed int limit)
 	signed int tmp, i;
 	u8 *p;
 
-	if (limit < 1)
+	if (limit < 2)
 		return NULL;
 
 	p = pbuf;
 	i = 0;
 	*len = 0;
-	while (1) {
+	while (i + 2 <= limit) {
+		tmp = *(p + 1);
+		if (i + 2 + tmp > limit)
+			break;
+
 		if (*p == index) {
-			*len = *(p + 1);
+			*len = tmp;
 			return p;
 		}
-		tmp = *(p + 1);
+
 		p += (tmp + 2);
 		i += (tmp + 2);
-		if (i >= limit)
-			break;
 	}
 	return NULL;
 }
diff --git a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
index a897c433d2b0..72eb48d554a3 100644
--- a/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
+++ b/drivers/staging/rtl8723bs/core/rtw_mlme_ext.c
@@ -588,9 +588,11 @@ unsigned int OnBeacon(struct adapter *padapter, union recv_frame *precv_frame)
 
 	p = rtw_get_ie(pframe + sizeof(struct ieee80211_hdr_3addr) + _BEACON_IE_OFFSET_, WLAN_EID_EXT_SUPP_RATES, &ielen, precv_frame->u.hdr.len - sizeof(struct ieee80211_hdr_3addr) - _BEACON_IE_OFFSET_);
 	if (p && ielen > 0) {
-		if ((*(p + 1 + ielen) == 0x2D) && (*(p + 2 + ielen) != 0x2D))
-			/* Invalid value 0x2D is detected in Extended Supported Rates (ESR) IE. Try to fix the IE length to avoid failed Beacon parsing. */
-			*(p + 1) = ielen - 1;
+		if (p + 2 + ielen < pframe + len) {
+			if ((*(p + 1 + ielen) == 0x2D) && (*(p + 2 + ielen) != 0x2D))
+				/* Invalid value 0x2D is detected in Extended Supported Rates (ESR) IE. Try to fix the IE length to avoid failed Beacon parsing. */
+				*(p + 1) = ielen - 1;
+		}
 	}
 
 	if (pmlmeext->sitesurvey_res.state == SCAN_PROCESS) {
@@ -1042,6 +1044,9 @@ unsigned int OnAssocReq(struct adapter *padapter, union recv_frame *precv_frame)
 		status = WLAN_STATUS_CHALLENGE_FAIL;
 		goto OnAssocReqFail;
 	} else {
+		if (ie_len > sizeof(supportRate))
+			ie_len = sizeof(supportRate);
+
 		memcpy(supportRate, p+2, ie_len);
 		supportRateNum = ie_len;
 
@@ -1049,7 +1054,7 @@ unsigned int OnAssocReq(struct adapter *padapter, union recv_frame *precv_frame)
 				pkt_len - WLAN_HDR_A3_LEN - ie_offset);
 		if (p) {
 
-			if (supportRateNum <= sizeof(supportRate)) {
+			if (supportRateNum + ie_len <= sizeof(supportRate)) {
 				memcpy(supportRate+supportRateNum, p+2, ie_len);
 				supportRateNum += ie_len;
 			}
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 152f914c599d..12e8ceffab65 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -95,6 +95,11 @@
 #define PCI_DEVICE_ID_MOXA_CP138E_A	0x1381
 #define PCI_DEVICE_ID_MOXA_CP168EL_A	0x1683
 
+#define PCI_DEVICE_ID_ADDIDATA_CPCI7500        0x7003
+#define PCI_DEVICE_ID_ADDIDATA_CPCI7500_NG     0x7024
+#define PCI_DEVICE_ID_ADDIDATA_CPCI7420_NG     0x7025
+#define PCI_DEVICE_ID_ADDIDATA_CPCI7300_NG     0x7026
+
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588	0x1588
@@ -5996,6 +6001,38 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		0,
 		pbn_ADDIDATA_PCIe_8_3906250 },
 
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_CPCI7500,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_4_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_CPCI7500_NG,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_4_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_CPCI7420_NG,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_2_115200 },
+
+	{	PCI_VENDOR_ID_ADDIDATA,
+		PCI_DEVICE_ID_ADDIDATA_CPCI7300_NG,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
+		0,
+		0,
+		pbn_b0_1_115200 },
+
 	{	PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
 		PCI_VENDOR_ID_IBM, 0x0299,
 		0, 0, pbn_b0_bt_2_115200 },
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 62bb62b82cbe..1db4af6fe590 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1024,8 +1024,16 @@ static int sci_handle_fifo_overrun(struct uart_port *port)
 
 	status = s->ops->read_reg(port, s->params->overrun_reg);
 	if (status & s->params->overrun_mask) {
-		status &= ~s->params->overrun_mask;
-		s->ops->write_reg(port, s->params->overrun_reg, status);
+		if (s->type == SCI_PORT_RSCI) {
+			/*
+			 * All of the CFCLR_*C clearing bits match the corresponding
+			 * CSR_*status bits. So, reuse the overrun mask for clearing.
+			 */
+			s->ops->clear_SCxSR(port, s->params->overrun_mask);
+		} else {
+			status &= ~s->params->overrun_mask;
+			s->ops->write_reg(port, s->params->overrun_reg, status);
+		}
 
 		port->icount.overrun++;
 
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 44f5b58beec9..aa6b4c4ad5ec 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -435,7 +435,7 @@ static int belkin_sa_tiocmset(struct tty_struct *tty,
 	struct belkin_sa_private *priv = usb_get_serial_port_data(port);
 	unsigned long control_state;
 	unsigned long flags;
-	int retval;
+	int retval = 0;
 	int rts = 0;
 	int dtr = 0;
 
@@ -452,26 +452,32 @@ static int belkin_sa_tiocmset(struct tty_struct *tty,
 	}
 	if (clear & TIOCM_RTS) {
 		control_state &= ~TIOCM_RTS;
-		rts = 0;
+		rts = 1;
 	}
 	if (clear & TIOCM_DTR) {
 		control_state &= ~TIOCM_DTR;
-		dtr = 0;
+		dtr = 1;
 	}
 
 	priv->control_state = control_state;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
-	if (retval < 0) {
-		dev_err(&port->dev, "Set RTS error %d\n", retval);
-		goto exit;
+	if (rts) {
+		retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST,
+					!!(control_state & TIOCM_RTS));
+		if (retval < 0) {
+			dev_err(&port->dev, "Set RTS error %d\n", retval);
+			goto exit;
+		}
 	}
 
-	retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
-	if (retval < 0) {
-		dev_err(&port->dev, "Set DTR error %d\n", retval);
-		goto exit;
+	if (dtr) {
+		retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST,
+					!!(control_state & TIOCM_DTR));
+		if (retval < 0) {
+			dev_err(&port->dev, "Set DTR error %d\n", retval);
+			goto exit;
+		}
 	}
 exit:
 	return retval;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index b37fa31f5694..9993a5123344 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -628,10 +628,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
-	{ USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLXM_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_TIAO_UMPA_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_NT_ORIONLXM_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONLX_PLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORION_IO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_NT_ORIONMX_PID) },
@@ -842,24 +840,17 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ELSTER_UNICOM_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_JTAGCABLEII_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
-	{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, CYBER_CORTEX_AV_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
 	{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
-	{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FIC_VID, FIC_NEO1973_DEBUG_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_OOCDLINK_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_DEVEL_BOARD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, LMI_LM3S_ICDI_BOARD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_TURTELIZER_PID, 1) },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_SCU18) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
@@ -901,17 +892,14 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(ATMEL_VID, STK541_PID) },
 	{ USB_DEVICE(DE_VID, STB_PID) },
 	{ USB_DEVICE(DE_VID, WHT_PID) },
-	{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(ADI_VID, ADI_GNICE_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ADI_VID, ADI_GNICEPLUS_PID, 1) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
 					USB_CLASS_VENDOR_SPEC,
 					USB_SUBCLASS_VENDOR_SPEC, 0x00) },
 	{ USB_DEVICE_INTERFACE_NUMBER(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID, 2) },
 	{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
-	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(MARVELL_VID, MARVELL_SHEEVAPLUG_PID, 1) },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
 	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
 	{ USB_DEVICE(FTDI_VID, PI_C865_PID) },
@@ -934,10 +922,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(PI_VID, PI_1016_PID) },
 	{ USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) },
 	{ USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) },
-	{ USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, TI_XDS100V2_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, MARVELL_OPENRD_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, TI_XDS100V2_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) },
 	{ USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) },
@@ -946,18 +932,14 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) },
 	{ USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) },
-	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, XVERVE_SIGNALYZER_ST_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(FTDI_VID, SEGWAY_RMP200_PID) },
 	{ USB_DEVICE(FTDI_VID, ACCESIO_COM4SM_PID) },
-	{ USB_DEVICE(IONICS_VID, IONICS_PLUGCOMPUTER_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(IONICS_VID, IONICS_PLUGCOMPUTER_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_24_MASTER_WING_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_PC_WING_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_CHAMSYS_USB_DMX_PID) },
@@ -972,15 +954,12 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_FHE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
-	{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(ST_VID, ST_STMCLT_2232_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(ST_VID, ST_STMCLT_2232_PID, 1) },
 	{ USB_DEVICE(ST_VID, ST_STMCLT_4232_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_RF_R106) },
-	{ USB_DEVICE(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_DISTORTEC_JTAG_LOCK_PICK_PID, 1) },
 	{ USB_DEVICE(FTDI_VID, FTDI_LUMEL_PD12_PID) },
 	/* Crucible Devices */
 	{ USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) },
@@ -1055,8 +1034,7 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7561U_PID) },
 	{ USB_DEVICE(ICPDAS_VID, ICPDAS_I7563U_PID) },
 	{ USB_DEVICE(WICED_VID, WICED_USB20706V2_PID) },
-	{ USB_DEVICE(TI_VID, TI_CC3200_LAUNCHPAD_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(TI_VID, TI_CC3200_LAUNCHPAD_PID, 1) },
 	{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_BT_USB_PID) },
 	{ USB_DEVICE(CYPRESS_VID, CYPRESS_WICED_WL_USB_PID) },
 	{ USB_DEVICE(AIRBUS_DS_VID, AIRBUS_DS_P8GR) },
@@ -1076,10 +1054,8 @@ static const struct usb_device_id id_table_combined[] = {
 	{ USB_DEVICE(UBLOX_VID, UBLOX_C099F9P_ODIN_PID) },
 	{ USB_DEVICE_INTERFACE_NUMBER(UBLOX_VID, UBLOX_EVK_M101_PID, 2) },
 	/* FreeCalypso USB adapters */
-	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
-	{ USB_DEVICE(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID),
-		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_FALCONIA_JTAG_BUF_PID, 1) },
+	{ USB_DEVICE_INTERFACE_NUMBER(FTDI_VID, FTDI_FALCONIA_JTAG_UNBUF_PID, 1) },
 	/* GMC devices */
 	{ USB_DEVICE(GMC_VID, GMC_Z216C_PID) },
 	/* Altera USB Blaster 3 */
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 464433be2034..96ea571c436a 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -418,7 +418,7 @@ static int kobil_tiocmset(struct tty_struct *tty,
 	struct usb_serial_port *port = tty->driver_data;
 	struct device *dev = &port->dev;
 	struct kobil_private *priv;
-	int result;
+	int result = 0;
 	int dtr = 0;
 	int rts = 0;
 
@@ -435,12 +435,12 @@ static int kobil_tiocmset(struct tty_struct *tty,
 	if (set & TIOCM_DTR)
 		dtr = 1;
 	if (clear & TIOCM_RTS)
-		rts = 0;
+		rts = 1;
 	if (clear & TIOCM_DTR)
-		dtr = 0;
+		dtr = 1;
 
-	if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
-		if (dtr != 0)
+	if (dtr && priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID) {
+		if (set & TIOCM_DTR)
 			dev_dbg(dev, "%s - Setting DTR\n", __func__);
 		else
 			dev_dbg(dev, "%s - Clearing DTR\n", __func__);
@@ -448,13 +448,13 @@ static int kobil_tiocmset(struct tty_struct *tty,
 			  usb_sndctrlpipe(port->serial->dev, 0),
 			  SUSBCRequest_SetStatusLinesOrQueues,
 			  USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-			  ((dtr != 0) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
+			  ((set & TIOCM_DTR) ? SUSBCR_SSL_SETDTR : SUSBCR_SSL_CLRDTR),
 			  0,
 			  NULL,
 			  0,
 			  KOBIL_TIMEOUT);
-	} else {
-		if (rts != 0)
+	} else if (rts) {
+		if (set & TIOCM_RTS)
 			dev_dbg(dev, "%s - Setting RTS\n", __func__);
 		else
 			dev_dbg(dev, "%s - Clearing RTS\n", __func__);
@@ -462,7 +462,7 @@ static int kobil_tiocmset(struct tty_struct *tty,
 			usb_sndctrlpipe(port->serial->dev, 0),
 			SUSBCRequest_SetStatusLinesOrQueues,
 			USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT,
-			((rts != 0) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
+			((set & TIOCM_RTS) ? SUSBCR_SSL_SETRTS : SUSBCR_SSL_CLRRTS),
 			0,
 			NULL,
 			0,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e9400727ad36..4c0e5a3ab557 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1433,17 +1433,31 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10b3, 0xff, 0xff, 0x60) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c0, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c1, 0xff),	/* Telit FE910C04 (RNDIS) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c2, 0xff),	/* Telit FE910C04 (MBIM) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c3, 0xff),	/* Telit FE910C04 (ECM) */
+	  .driver_info = NCTRL(4) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c4, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c5, 0xff),	/* Telit FE910C04 (RNDIS) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c6, 0xff),	/* Telit FE910C04 (MBIM) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x30),	/* Telit FE910C04 (ECM) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c8, 0xff),	/* Telit FE910C04 (rmnet) */
 	  .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10c9, 0xff),	/* Telit FE910C04 (MBIM) */
+	  .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10cb, 0xff),	/* Telit FE910C04 (RNDIS) */
+	  .driver_info = NCTRL(3) | RSVD(4) | RSVD(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x30),	/* Telit FN990B (rmnet) */
 	  .driver_info = NCTRL(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x30),	/* Telit FE910C04 (ECM) */
-	  .driver_info = NCTRL(4) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30),	/* Telit FN990B (MBIM) */
 	  .driver_info = NCTRL(6) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) },
@@ -2376,6 +2390,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe0f0, 0xff),			/* Foxconn T99W373 MBIM */
 	  .driver_info = RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe123, 0xff),			/* Foxconn T99W760 MBIM */
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe145, 0xff),			/* Foxconn T99W651 RNDIS */
 	  .driver_info = RSVD(5) | RSVD(6) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe15f, 0xff),                     /* Foxconn T99W709 */
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 1b094a4f3866..1f6bc05593df 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -418,7 +418,12 @@ static int ext4_prepare_inline_data(handle_t *handle, struct inode *inode,
 		return -ENOSPC;
 
 	ext4_write_lock_xattr(inode, &no_expand);
-
+	/*
+	 * ei->i_inline_size may have changed since the initial check
+	 * if other xattrs were added. Recalculate to ensure
+	 * ext4_update_inline_data() validates against current capacity.
+	 */
+	(void) ext4_find_inline_data_nolock(inode);
 	if (ei->i_inline_off)
 		ret = ext4_update_inline_data(handle, inode, len);
 	else
@@ -446,9 +451,13 @@ static int ext4_destroy_inline_data_nolock(handle_t *handle,
 	if (!ei->i_inline_off)
 		return 0;
 
+	down_write(&ei->i_data_sem);
+
 	error = ext4_get_inode_loc(inode, &is.iloc);
-	if (error)
+	if (error) {
+		up_write(&ei->i_data_sem);
 		return error;
+	}
 
 	error = ext4_xattr_ibody_find(inode, &i, &is);
 	if (error)
@@ -487,6 +496,7 @@ static int ext4_destroy_inline_data_nolock(handle_t *handle,
 	brelse(is.iloc.bh);
 	if (error == -ENODATA)
 		error = 0;
+	up_write(&ei->i_data_sem);
 	return error;
 }
 
diff --git a/fs/jbd2/transaction.c b/fs/jbd2/transaction.c
index 3e510564de6e..9ce626ac947e 100644
--- a/fs/jbd2/transaction.c
+++ b/fs/jbd2/transaction.c
@@ -1284,14 +1284,23 @@ int jbd2_journal_get_create_access(handle_t *handle, struct buffer_head *bh)
 	 * committing transaction's lists, but it HAS to be in Forget state in
 	 * that case: the transaction must have deleted the buffer for it to be
 	 * reused here.
+	 * In the case of file system data inconsistency, for example, if the
+	 * block bitmap of a referenced block is not set, it can lead to the
+	 * situation where a block being committed is allocated and used again.
+	 * As a result, the following condition will not be satisfied, so here
+	 * we directly trigger a JBD abort instead of immediately invoking
+	 * bugon.
 	 */
 	spin_lock(&jh->b_state_lock);
-	J_ASSERT_JH(jh, (jh->b_transaction == transaction ||
-		jh->b_transaction == NULL ||
-		(jh->b_transaction == journal->j_committing_transaction &&
-			  jh->b_jlist == BJ_Forget)));
+	if (!(jh->b_transaction == transaction || jh->b_transaction == NULL ||
+	      (jh->b_transaction == journal->j_committing_transaction &&
+	       jh->b_jlist == BJ_Forget)) || jh->b_next_transaction != NULL) {
+		err = -EROFS;
+		spin_unlock(&jh->b_state_lock);
+		jbd2_journal_abort(journal, err);
+		goto out;
+	}
 
-	J_ASSERT_JH(jh, jh->b_next_transaction == NULL);
 	J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
 
 	if (jh->b_transaction == NULL) {
diff --git a/fs/smb/server/transport_ipc.c b/fs/smb/server/transport_ipc.c
index 2c08cccfa680..2dbabe2d8005 100644
--- a/fs/smb/server/transport_ipc.c
+++ b/fs/smb/server/transport_ipc.c
@@ -553,12 +553,16 @@ static void *ipc_msg_send_request(struct ksmbd_ipc_msg *msg, unsigned int handle
 	up_write(&ipc_msg_table_lock);
 
 	ret = ipc_msg_send(msg);
-	if (ret)
+	if (ret) {
+		down_write(&ipc_msg_table_lock);
 		goto out;
+	}
 
 	ret = wait_event_interruptible_timeout(entry.wait,
 					       entry.response != NULL,
 					       IPC_WAIT_TIMEOUT);
+
+	down_write(&ipc_msg_table_lock);
 	if (entry.response) {
 		ret = ipc_validate_msg(&entry);
 		if (ret) {
@@ -567,7 +571,6 @@ static void *ipc_msg_send_request(struct ksmbd_ipc_msg *msg, unsigned int handle
 		}
 	}
 out:
-	down_write(&ipc_msg_table_lock);
 	hash_del(&entry.ipc_table_hlist);
 	up_write(&ipc_msg_table_lock);
 	return entry.response;
diff --git a/kernel/locking/spinlock_debug.c b/kernel/locking/spinlock_debug.c
index 87b03d2e41db..2338b3adfb55 100644
--- a/kernel/locking/spinlock_debug.c
+++ b/kernel/locking/spinlock_debug.c
@@ -184,8 +184,8 @@ void do_raw_read_unlock(rwlock_t *lock)
 static inline void debug_write_lock_before(rwlock_t *lock)
 {
 	RWLOCK_BUG_ON(lock->magic != RWLOCK_MAGIC, lock, "bad magic");
-	RWLOCK_BUG_ON(lock->owner == current, lock, "recursion");
-	RWLOCK_BUG_ON(lock->owner_cpu == raw_smp_processor_id(),
+	RWLOCK_BUG_ON(READ_ONCE(lock->owner) == current, lock, "recursion");
+	RWLOCK_BUG_ON(READ_ONCE(lock->owner_cpu) == raw_smp_processor_id(),
 							lock, "cpu recursion");
 }