From: david.laight.linux@gmail.com
To: Yury Norov <yury.norov@gmail.com>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
Geert Uytterhoeven <geert+renesas@glider.be>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Crt Mori <cmo@melexis.com>,
Richard Genoud <richard.genoud@bootlin.com>,
Andy Shevchenko <andriy.shevchenko@intel.com>,
Luo Jie <quic_luoj@quicinc.com>,
Peter Zijlstra <peterz@infradead.org>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, "David S . Miller" <davem@davemloft.net>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Andreas Noever <andreas.noever@gmail.com>,
Yehezkel Bernat <YehezkelShB@gmail.com>,
Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Cc: David Laight <david.laight.linux@gmail.com>
Subject: [PATCH v2 10/16] bitfield: Split the 'val' check out of __BF_FIELD_CHECK_MASK()
Date: Fri, 12 Dec 2025 19:37:15 +0000 [thread overview]
Message-ID: <20251212193721.740055-11-david.laight.linux@gmail.com> (raw)
In-Reply-To: <20251212193721.740055-1-david.laight.linux@gmail.com>
From: David Laight <david.laight.linux@gmail.com>
Three of the five calls to __BF_FIELD_CHECK_MASK() don't have a 'value'
to check, separate out as was done to __BF_FIELD_CHECK_REG().
Since __BF_FIELD_CHECK_MASK() doesn't return a value, use
do { ... } while (0) rather than ({ ... }).
There is no point checking a 'val' of zero or a 'reg' of 0ULL (both
are placeholders) - remove/change the calls.
There should be a check of __BF_FIELD_CHECK_REG() when __BF_FIELD_GET()
is called from field_get().
Move the check from FIELD_GET() into __BF_FIELD_GET().
Delete the now-unused __BF_FIELD_CHECK().
Signed-off-by: David Laight <david.laight.linux@gmail.com>
---
include/linux/bitfield.h | 38 +++++++++++++++++---------------------
1 file changed, 17 insertions(+), 21 deletions(-)
diff --git a/include/linux/bitfield.h b/include/linux/bitfield.h
index ed5735c13a64..138f4c14786d 100644
--- a/include/linux/bitfield.h
+++ b/include/linux/bitfield.h
@@ -45,39 +45,36 @@
#define __bf_shf(x) (__builtin_ffsll(x) - 1)
-#define __BF_FIELD_CHECK_MASK(_mask, _val, _pfx) \
- ({ \
+#define __BF_FIELD_CHECK_MASK(_mask, _pfx) \
+ do { \
BUILD_BUG_ON_MSG(!__builtin_constant_p(_mask), \
_pfx "mask is not constant"); \
BUILD_BUG_ON_MSG((_mask) == 0, _pfx "mask is zero"); \
- BUILD_BUG_ON_MSG(__builtin_constant_p(_val) ? \
- ~((_mask) >> __bf_shf(_mask)) & \
- (0 + (_val)) : 0, \
- _pfx "value too large for the field"); \
__BUILD_BUG_ON_NOT_POWER_OF_2((_mask) + \
(1ULL << __bf_shf(_mask))); \
- })
+ } while (0)
+
+#define __BF_FIELD_CHECK_VAL(mask, val, pfx) \
+ BUILD_BUG_ON_MSG(__builtin_constant_p(val) && \
+ ~((mask) >> __bf_shf(mask)) & (val), \
+ pfx "value too large for the field")
#define __BF_FIELD_CHECK_REG(mask, reg, pfx) \
BUILD_BUG_ON_MSG((mask) + 0U + 0UL + 0ULL > \
~0ULL >> (64 - 8 * sizeof (reg)), \
pfx "type of reg too small for mask")
-#define __BF_FIELD_CHECK(mask, reg, val, pfx) \
- ({ \
- __BF_FIELD_CHECK_MASK(mask, val, pfx); \
- __BF_FIELD_CHECK_REG(mask, reg, pfx); \
- })
-
#define __BF_FIELD_PREP(mask, val, pfx) \
({ \
- __BF_FIELD_CHECK_MASK(mask, val, pfx); \
+ __BF_FIELD_CHECK_MASK(mask, pfx); \
+ __BF_FIELD_CHECK_VAL(mask, val, pfx); \
((val) << __bf_shf(mask)) & (mask); \
})
#define __BF_FIELD_GET(mask, reg, pfx) \
({ \
- __BF_FIELD_CHECK_MASK(mask, 0U, pfx); \
+ __BF_FIELD_CHECK_MASK(mask, pfx); \
+ __BF_FIELD_CHECK_REG(mask, reg, pfx); \
((reg) & (mask)) >> __bf_shf(mask); \
})
@@ -91,7 +88,7 @@
#define FIELD_MAX(mask) \
({ \
__auto_type _mask = mask; \
- __BF_FIELD_CHECK(_mask, 0ULL, 0ULL, "FIELD_MAX: "); \
+ __BF_FIELD_CHECK_MASK(_mask, "FIELD_MAX: "); \
(_mask >> __bf_shf(_mask)); \
})
@@ -106,7 +103,7 @@
({ \
__auto_type _mask = mask; \
__auto_type _val = 1 ? (val) : _mask; \
- __BF_FIELD_CHECK(_mask, 0ULL, 0ULL, "FIELD_FIT: "); \
+ __BF_FIELD_CHECK_MASK(_mask, "FIELD_FIT: "); \
!((_val << __bf_shf(_mask)) & ~_mask); \
})
@@ -122,7 +119,6 @@
({ \
__auto_type _mask = mask; \
__auto_type _val = 1 ? (val) : _mask; \
- __BF_FIELD_CHECK_REG(_mask, 0ULL, "FIELD_PREP: "); \
__BF_FIELD_PREP(_mask, _val, "FIELD_PREP: "); \
})
@@ -164,7 +160,6 @@
({ \
__auto_type _mask = mask; \
__auto_type _reg = reg; \
- __BF_FIELD_CHECK_REG(_mask, _reg, "FIELD_GET: "); \
__BF_FIELD_GET(_mask, _reg, "FIELD_GET: "); \
})
@@ -182,8 +177,9 @@
__auto_type _mask = mask; \
__auto_type _reg_p = reg_p; \
__auto_type _val = 1 ? (val) : _mask; \
- typecheck_pointer(_reg_p); \
- __BF_FIELD_CHECK(_mask, *(_reg_p), _val, "FIELD_MODIFY: "); \
+ __BF_FIELD_CHECK_MASK(_mask, "FIELD_MODIFY: "); \
+ __BF_FIELD_CHECK_VAL(_mask, _val, "FIELD_MODIFY: "); \
+ __BF_FIELD_CHECK_REG(_mask, *_reg_p, "FIELD_MODIFY: "); \
*_reg_p = (*_reg_p & ~_mask) | ((_val << __bf_shf(_mask)) & _mask); \
})
--
2.39.5
next prev parent reply other threads:[~2025-12-12 19:38 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-12 19:37 [PATCH v2 0/16] bitfield: tidy up bitfield.h david.laight.linux
2025-12-12 19:37 ` [PATCH v2 01/16] nfp: Call FIELD_PREP() in NFP_ETH_SET_BIT_CONFIG() wrapper david.laight.linux
2025-12-12 23:10 ` Jakub Kicinski
2025-12-12 19:37 ` [PATCH v2 02/16] thunderbolt: Don't pass a bitfield to FIELD_GET david.laight.linux
2025-12-13 2:28 ` Yury Norov
2025-12-13 10:01 ` David Laight
2025-12-13 22:14 ` David Laight
2025-12-12 19:37 ` [PATCH v2 03/16] bitmap: Use FIELD_PREP() in expansion of FIELD_PREP_WM16() david.laight.linux
2025-12-12 19:37 ` [PATCH v2 04/16] bitfield: Copy #define parameters to locals david.laight.linux
2025-12-12 19:37 ` [PATCH v2 05/16] bitfield: Merge __field_prep/get() into field_prep/get() david.laight.linux
2025-12-12 19:37 ` [PATCH v2 06/16] bitfield: Remove some pointless casts david.laight.linux
2025-12-12 19:37 ` [PATCH v2 07/16] bitfield: FIELD_MODIFY: Only do a single read/write on the target david.laight.linux
2025-12-12 19:37 ` [PATCH v2 08/16] bitfield: Simplify __BF_FIELD_CHECK_REG() david.laight.linux
2025-12-12 19:37 ` [PATCH v2 09/16] bitfield: Rename __FIELD_PREP/GET() to __BF_FIELD_PREP/GET() david.laight.linux
2025-12-12 19:37 ` david.laight.linux [this message]
2025-12-12 19:37 ` [PATCH v2 11/16] bitfield: Common up validation of the mask parameter david.laight.linux
2025-12-14 6:19 ` kernel test robot
2025-12-14 13:17 ` David Laight
2025-12-12 19:37 ` [PATCH v2 12/16] bitfield: Remove leading _ from #define formal parameter names david.laight.linux
2025-12-12 19:37 ` [PATCH v2 13/16] bitfield: Reduce indentation david.laight.linux
2025-12-12 19:37 ` [PATCH v2 14/16] bitfield: Add comment block for the host/fixed endian functions david.laight.linux
2025-12-12 19:37 ` [PATCH v2 15/16] bitfield: Update comments for le/be functions david.laight.linux
2025-12-12 19:37 ` [PATCH v2 16/16] build_bug.h; Remove __BUILD_BUG_ON_NOT_POWER_OF_2() david.laight.linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251212193721.740055-11-david.laight.linux@gmail.com \
--to=david.laight.linux@gmail.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=YehezkelShB@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andreas.noever@gmail.com \
--cc=andriy.shevchenko@intel.com \
--cc=cmo@melexis.com \
--cc=davem@davemloft.net \
--cc=geert+renesas@glider.be \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=mika.westerberg@linux.intel.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.frattaroli@collabora.com \
--cc=peterz@infradead.org \
--cc=quic_luoj@quicinc.com \
--cc=richard.genoud@bootlin.com \
--cc=yury.norov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).