The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Xiaolei Wang <xiaolei.wang@windriver.com>
To: laurent.pinchart@ideasonboard.com, sakari.ailus@linux.intel.com,
	dave.stevenson@raspberrypi.com, jacopo@jmondi.org,
	mchehab@kernel.org, prabhakar.mahadev-lad.rj@bp.renesas.com,
	hverkuil+cisco@kernel.org, johannes.goede@oss.qualcomm.com,
	hverkuil-cisco@xs4all.nl, jai.luthra@ideasonboard.com,
	xiaolei.wang@windriver.com
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] media: i2c: ov5647: switch to {enable,disable}_streams
Date: Mon, 29 Dec 2025 10:30:18 +0800	[thread overview]
Message-ID: <20251229023018.2933405-4-xiaolei.wang@windriver.com> (raw)
In-Reply-To: <20251229023018.2933405-1-xiaolei.wang@windriver.com>

Switch from s_stream to enable_streams and disable_streams callbacks.

Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
---
 drivers/media/i2c/ov5647.c | 69 ++++++++++++++++----------------------
 1 file changed, 29 insertions(+), 40 deletions(-)

diff --git a/drivers/media/i2c/ov5647.c b/drivers/media/i2c/ov5647.c
index f0ca8cc14794..7f4541f46335 100644
--- a/drivers/media/i2c/ov5647.c
+++ b/drivers/media/i2c/ov5647.c
@@ -637,23 +637,29 @@ static int ov5647_set_mode(struct v4l2_subdev *sd)
 	return 0;
 }
 
-static int ov5647_stream_on(struct v4l2_subdev *sd)
+static int ov5647_enable_streams(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *state, u32 pad,
+				 u64 streams_mask)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct ov5647 *sensor = to_sensor(sd);
 	u8 val = MIPI_CTRL00_BUS_IDLE;
 	int ret = 0;
 
+	ret = pm_runtime_resume_and_get(&client->dev);
+	if (ret < 0)
+		return ret;
+
 	ret = ov5647_set_mode(sd);
 	if (ret) {
 		dev_err(&client->dev, "Failed to program sensor mode: %d\n", ret);
-		return ret;
+		goto err_rpm_put;
 	}
 
 	/* Apply customized values from user when stream starts. */
-	ret =  v4l2_ctrl_handler_setup(sd->ctrl_handler);
+	ret = __v4l2_ctrl_handler_setup(sd->ctrl_handler);
 	if (ret)
-		return ret;
+		goto err_rpm_put;
 
 	if (sensor->clock_ncont)
 		val |= MIPI_CTRL00_CLOCK_LANE_GATE |
@@ -663,11 +669,18 @@ static int ov5647_stream_on(struct v4l2_subdev *sd)
 	cci_write(sensor->regmap, OV5647_REG_FRAME_OFF_NUMBER, 0x00, &ret);
 	cci_write(sensor->regmap, OV5640_REG_PAD_OUT, 0x00, &ret);
 
+err_rpm_put:
+	if (ret)
+		pm_runtime_put(&client->dev);
+
 	return ret;
 }
 
-static int ov5647_stream_off(struct v4l2_subdev *sd)
+static int ov5647_disable_streams(struct v4l2_subdev *sd,
+				  struct v4l2_subdev_state *state, u32 pad,
+				  u64 streams_mask)
 {
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
 	struct ov5647 *sensor = to_sensor(sd);
 	int ret = 0;
 
@@ -677,13 +690,15 @@ static int ov5647_stream_off(struct v4l2_subdev *sd)
 	cci_write(sensor->regmap, OV5647_REG_FRAME_OFF_NUMBER, 0x0f, &ret);
 	cci_write(sensor->regmap, OV5640_REG_PAD_OUT, 0x01, &ret);
 
+	pm_runtime_put(&client->dev);
+
 	return ret;
 }
 
 static int ov5647_power_on(struct device *dev)
 {
 	struct ov5647 *sensor = dev_get_drvdata(dev);
-	int ret;
+	int ret = 0;
 
 	dev_dbg(dev, "OV5647 power on\n");
 
@@ -706,7 +721,11 @@ static int ov5647_power_on(struct device *dev)
 	}
 
 	/* Stream off to coax lanes into LP-11 state. */
-	ret = ov5647_stream_off(&sensor->sd);
+	cci_write(sensor->regmap, OV5647_REG_MIPI_CTRL00,
+		  MIPI_CTRL00_CLOCK_LANE_GATE | MIPI_CTRL00_BUS_IDLE |
+		  MIPI_CTRL00_CLOCK_LANE_DISABLE, &ret);
+	cci_write(sensor->regmap, OV5647_REG_FRAME_OFF_NUMBER, 0x0f, &ret);
+	cci_write(sensor->regmap, OV5640_REG_PAD_OUT, 0x01, &ret);
 	if (ret < 0) {
 		dev_err(dev, "camera not available, check power\n");
 		goto error_clk_disable;
@@ -803,40 +822,8 @@ __ov5647_get_pad_crop(struct ov5647 *ov5647,
 	return NULL;
 }
 
-static int ov5647_s_stream(struct v4l2_subdev *sd, int enable)
-{
-	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	int ret;
-
-	if (enable) {
-		ret = pm_runtime_resume_and_get(&client->dev);
-		if (ret < 0)
-			return ret;
-
-		ret = ov5647_stream_on(sd);
-		if (ret < 0) {
-			dev_err(&client->dev, "stream start failed: %d\n", ret);
-			goto error_pm;
-		}
-	} else {
-		ret = ov5647_stream_off(sd);
-		if (ret < 0) {
-			dev_err(&client->dev, "stream stop failed: %d\n", ret);
-			goto error_pm;
-		}
-		pm_runtime_put(&client->dev);
-	}
-
-	return 0;
-
-error_pm:
-	pm_runtime_put(&client->dev);
-
-	return ret;
-}
-
 static const struct v4l2_subdev_video_ops ov5647_subdev_video_ops = {
-	.s_stream =		ov5647_s_stream,
+	.s_stream = v4l2_subdev_s_stream_helper,
 };
 
 static int ov5647_enum_mbus_code(struct v4l2_subdev *sd,
@@ -979,6 +966,8 @@ static const struct v4l2_subdev_pad_ops ov5647_subdev_pad_ops = {
 	.set_fmt		= ov5647_set_pad_fmt,
 	.get_fmt		= ov5647_get_pad_fmt,
 	.get_selection		= ov5647_get_selection,
+	.enable_streams         = ov5647_enable_streams,
+	.disable_streams        = ov5647_disable_streams,
 };
 
 static const struct v4l2_subdev_ops ov5647_subdev_ops = {
-- 
2.43.0


  parent reply	other threads:[~2025-12-29  2:31 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-29  2:30 [PATCH v2 0/3] media: i2c: ov5647: Modernize driver with CCI and new stream APIs Xiaolei Wang
2025-12-29  2:30 ` [PATCH v2 1/3] media: i2c: ov5647: Convert to CCI register access helpers Xiaolei Wang
2025-12-29 12:37   ` Tarang Raval
2025-12-29 13:01     ` Laurent Pinchart
2025-12-29 13:26       ` Tarang Raval
2025-12-31  2:57       ` xiaolei wang
2025-12-29 13:26   ` johannes.goede
2025-12-29 14:52   ` Tarang Raval
2025-12-29  2:30 ` [PATCH v2 2/3] media: i2c: ov5647: Switch to using the sub-device state lock Xiaolei Wang
2025-12-29 18:55   ` Sakari Ailus
2025-12-31  2:58     ` xiaolei wang
2025-12-29  2:30 ` Xiaolei Wang [this message]
2025-12-29 13:43   ` [PATCH v2 3/3] media: i2c: ov5647: switch to {enable,disable}_streams Laurent Pinchart
2025-12-31  3:02     ` xiaolei wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20251229023018.2933405-4-xiaolei.wang@windriver.com \
    --to=xiaolei.wang@windriver.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=hverkuil+cisco@kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jacopo@jmondi.org \
    --cc=jai.luthra@ideasonboard.com \
    --cc=johannes.goede@oss.qualcomm.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox