[PATCH 02/13] ARM: dts: broadcom: bcm2835-rpi: Move non simple-bus nodes to root level

["Rob Herring (Arm)" <robh@kernel.org>]

The 'gpu' and 'firmware' nodes are not MMIO devices, so they should not be
under a 'simple-bus'. Additionally, the "raspberrypi,bcm2835-power" node
is part of the firmware, so move it under the /firmware node.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 arch/arm/boot/dts/broadcom/bcm2835-common.dtsi |  7 ++++---
 arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi    | 16 ++++++++--------
 2 files changed, 12 insertions(+), 11 deletions(-)

diff --git a/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
index 9261b67dbee1..1e76b290510d 100644
--- a/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835-common.dtsi
@@ -141,9 +141,10 @@ v3d: v3d@7ec00000 {
 			interrupts = <1 10>;
 		};
 
-		vc4: gpu {
-			compatible = "brcm,bcm2835-vc4";
-		};
+	};
+
+	vc4: gpu {
+		compatible = "brcm,bcm2835-vc4";
 	};
 };
 
diff --git a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
index e9bf41b9f5c1..9ab70b519a63 100644
--- a/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm2835-rpi.dtsi
@@ -1,15 +1,13 @@
 #include <dt-bindings/power/raspberrypi-power.h>
 
 / {
-	soc {
-		firmware: firmware {
-			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
-			mboxes = <&mailbox>;
+	firmware: firmware {
+		compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+		mboxes = <&mailbox>;
 
-			firmware_clocks: clocks {
-				compatible = "raspberrypi,firmware-clocks";
-				#clock-cells = <1>;
-			};
+		firmware_clocks: clocks {
+			compatible = "raspberrypi,firmware-clocks";
+			#clock-cells = <1>;
 		};
 
 		power: power {
@@ -17,7 +15,9 @@ power: power {
 			firmware = <&firmware>;
 			#power-domain-cells = <1>;
 		};
+	};
 
+	soc {
 		vchiq: mailbox@7e00b840 {
 			compatible = "brcm,bcm2835-vchiq";
 			reg = <0x7e00b840 0x3c>;

-- 
2.51.0