[PATCH v3 6/7] iio: health: max30102: Use IIO cleanup helpers

[Kurt Borja <kuurtb@gmail.com>]

Use IIO_DEV_GUARD_CURRENT_MODE() cleanup helper to simplify and drop
busy-waiting code in max30102_read_raw().

Signed-off-by: Kurt Borja <kuurtb@gmail.com>
---
 drivers/iio/health/max30102.c | 33 +++++++++------------------------
 1 file changed, 9 insertions(+), 24 deletions(-)

diff --git a/drivers/iio/health/max30102.c b/drivers/iio/health/max30102.c
index 6918fcb5de2b..47da44efd68b 100644
--- a/drivers/iio/health/max30102.c
+++ b/drivers/iio/health/max30102.c
@@ -467,44 +467,29 @@ static int max30102_read_raw(struct iio_dev *indio_dev,
 			     int *val, int *val2, long mask)
 {
 	struct max30102_data *data = iio_priv(indio_dev);
-	int ret = -EINVAL;
+	int ret;
 
 	switch (mask) {
-	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_RAW: {
 		/*
 		 * Temperature reading can only be acquired when not in
 		 * shutdown; leave shutdown briefly when buffer not running
 		 */
-any_mode_retry:
-		if (!iio_device_try_claim_buffer_mode(indio_dev)) {
-			/*
-			 * This one is a *bit* hacky. If we cannot claim buffer
-			 * mode, then try direct mode so that we make sure
-			 * things cannot concurrently change. And we just keep
-			 * trying until we get one of the modes...
-			 */
-			if (!iio_device_claim_direct(indio_dev))
-				goto any_mode_retry;
+		IIO_DEV_GUARD_CURRENT_MODE(indio_dev);
 
-			ret = max30102_get_temp(data, val, true);
-			iio_device_release_direct(indio_dev);
-		} else {
-			ret = max30102_get_temp(data, val, false);
-			iio_device_release_buffer_mode(indio_dev);
-		}
+		ret = max30102_get_temp(data, val, !iio_buffer_enabled(indio_dev));
 		if (ret)
 			return ret;
 
-		ret = IIO_VAL_INT;
-		break;
+		return IIO_VAL_INT;
+	}
 	case IIO_CHAN_INFO_SCALE:
 		*val = 1000;  /* 62.5 */
 		*val2 = 16;
-		ret = IIO_VAL_FRACTIONAL;
-		break;
+		return IIO_VAL_FRACTIONAL;
+	default:
+		return -EINVAL;
 	}
-
-	return ret;
 }
 
 static const struct iio_info max30102_info = {

-- 
2.52.0