Re: [PATCH v6 00/20] Samsung S2MPG10 regulator and S2MPG11 PMIC drivers

[Lee Jones <lee@kernel.org>]

On Mon, 05 Jan 2026, André Draszik wrote:

> This series extends the existing S2MPG10 PMIC driver to add support for
> the regulators, and adds new S2MPG11 core and regulator drivers.
> 
> --- dependency note ---
> This series must be applied in-order, due to the regulator drivers
> depending on headers & definitions added by the bindings and core
> drivers. I would expect them all to go via the MFD tree.
> 
> The MFD patches in this series also depend on my Samsung MFD patches
> due to patch context:
> https://lore.kernel.org/all/20251217-s5m-alarm-v2-0-b7bff003e94c@linaro.org/
> 
> While these patches compile, regulator probe will only be successful
> with my deferrable regulators patches from
> https://lore.kernel.org/r/20251227-regulators-defer-v1-0-3104b22d84cb@linaro.org
> --- end ---
> 
> The patches are kept together in one series, due to S2MPG11 and its
> regulators being very similar to S2MPG10.
> 
> The Samsung S2MPG11 PMIC is a Power Management IC for mobile
> applications with buck converters, various LDOs, power meters, and
> additional GPIO interfaces. It typically complements an S2MPG10 PMIC in
> a main/sub configuration as the sub-PMIC and both are used on the
> Google Pixel 6 and 6 Pro (oriole / raven).
> 
> A DT update for Oriole / Raven to enable these is required which I will
> send out separately.
> 
> Cheers,
> Andre'
> 
> Signed-off-by: André Draszik <andre.draszik@linaro.org>

MFD pieces look okay to me.

Once Mark provides his AB, I can merge the set.

[...]

-- 
Lee Jones [李琼斯]