drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: cast from restricted __be64

[kernel test robot <lkp@intel.com>]

tree:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head:   b71e635feefc852405b14620a7fc58c4c80c0f73
commit: 63ef02da5ddb725555cd41f125ec0bd8e893da3a i2c: octeon: add block-mode i2c operations
date:   8 months ago
config: arm64-randconfig-r121-20260113 (https://download.01.org/0day-ci/archive/20260113/202601132015.AVgB52xg-lkp@intel.com/config)
compiler: aarch64-linux-gcc (GCC) 8.5.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20260113/202601132015.AVgB52xg-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202601132015.AVgB52xg-lkp@intel.com/

sparse warnings: (new ones prefixed by >>)
   drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: incorrect type in argument 1 (different base types) @@     expected unsigned long long [usertype] val @@     got restricted __be64 [addressable] [usertype] buf @@
   drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse:     expected unsigned long long [usertype] val
   drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse:     got restricted __be64 [addressable] [usertype] buf
>> drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: cast from restricted __be64
>> drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: cast from restricted __be64
>> drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: cast from restricted __be64
>> drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: cast from restricted __be64
>> drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: cast from restricted __be64
>> drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: cast from restricted __be64
>> drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: cast from restricted __be64
>> drivers/i2c/busses/i2c-octeon-core.c:731:23: sparse: sparse: cast from restricted __be64
   drivers/i2c/busses/i2c-octeon-core.c:732:42: sparse: sparse: cast from restricted __be64

vim +731 drivers/i2c/busses/i2c-octeon-core.c

   688	
   689	/**
   690	 * octeon_i2c_hlc_block_comp_write - high-level-controller composite block write
   691	 * @i2c: The struct octeon_i2c
   692	 * @msgs: msg[0] contains address, msg[1] contains data to be written
   693	 *
   694	 * i2c core command is constructed and write data is written into the FIFO buffer.
   695	 * The execution of the command will result in HW write, using the data in FIFO.
   696	 * Used in the case where the i2c xfer is for greater than 8 bytes of write data.
   697	 *
   698	 * Returns: 0 on success, otherwise a negative errno.
   699	 */
   700	static int octeon_i2c_hlc_block_comp_write(struct octeon_i2c *i2c, struct i2c_msg *msgs)
   701	{
   702		bool set_ext;
   703		int ret;
   704		u16 len, i;
   705		u64 cmd, ext = 0;
   706	
   707		octeon_i2c_hlc_enable(i2c);
   708		octeon_i2c_block_enable(i2c);
   709	
   710		/* Write (size - 1) into block control register */
   711		len = msgs[1].len - 1;
   712		octeon_i2c_writeq_flush((u64)len, i2c->twsi_base + OCTEON_REG_BLOCK_CTL(i2c));
   713	
   714		/* Prepare core command */
   715		cmd = SW_TWSI_V | SW_TWSI_SOVR | SW_TWSI_OP_7_IA;
   716		cmd |= (u64)(msgs[0].addr & 0x7full) << SW_TWSI_ADDR_SHIFT;
   717	
   718		/* Set parameters for extended message (if required) */
   719		set_ext = octeon_i2c_hlc_ext(i2c, msgs[0], &cmd, &ext);
   720	
   721		/* Write msg into FIFO buffer */
   722		octeon_i2c_writeq_flush(TWSX_BLOCK_STS_RESET_PTR,
   723					i2c->twsi_base + OCTEON_REG_BLOCK_STS(i2c));
   724		for (i = 0; i <= len; i += 8) {
   725			__be64 buf = 0;
   726	
   727			/* Copy 8 bytes or remaining bytes from message buffer */
   728			memcpy(&buf, &msgs[1].buf[i], min(8, msgs[1].len - i));
   729	
   730			/* Byte-swap message data and write into FIFO */
 > 731			buf = cpu_to_be64(buf);
   732			octeon_i2c_writeq_flush((u64)buf, i2c->twsi_base + OCTEON_REG_BLOCK_FIFO(i2c));
   733		}
   734		if (set_ext)
   735			octeon_i2c_writeq_flush(ext, i2c->twsi_base + OCTEON_REG_SW_TWSI_EXT(i2c));
   736	
   737		/* Send command to core (send data in FIFO) */
   738		ret = octeon_i2c_hlc_cmd_send(i2c, cmd);
   739		if (ret)
   740			goto err;
   741	
   742		cmd = __raw_readq(i2c->twsi_base + OCTEON_REG_SW_TWSI(i2c));
   743		if ((cmd & SW_TWSI_R) == 0) {
   744			octeon_i2c_block_disable(i2c);
   745			return octeon_i2c_check_status(i2c, false);
   746		}
   747	
   748	err:
   749		octeon_i2c_block_disable(i2c);
   750		return ret;
   751	}
   752	

-- 
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki