From: Artem Lytkin <iprintercanon@gmail.com>
To: Sudip Mukherjee <sudipm.mukherjee@gmail.com>,
Teddy Wang <teddy.wang@siliconmotion.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-fbdev@vger.kernel.org, linux-staging@lists.linux.dev,
linux-kernel@vger.kernel.org,
Artem Lytkin <iprintercanon@gmail.com>
Subject: [PATCH v3 3/5] staging: sm750fb: remove debug and diagnostic prints
Date: Wed, 4 Feb 2026 12:06:00 +0000 [thread overview]
Message-ID: <20260204120602.6715-3-iprintercanon@gmail.com> (raw)
In-Reply-To: <20260204120602.6715-1-iprintercanon@gmail.com>
Remove pr_info, pr_debug, and pr_warn calls that dump internal
variable values, pointer addresses, structure contents, and
other diagnostic information not useful for production use.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
---
drivers/staging/sm750fb/sm750.c | 53 ++----------------------------
drivers/staging/sm750fb/sm750_hw.c | 8 -----
2 files changed, 2 insertions(+), 59 deletions(-)
diff --git a/drivers/staging/sm750fb/sm750.c b/drivers/staging/sm750fb/sm750.c
index bd2d4a290..050408af2 100644
--- a/drivers/staging/sm750fb/sm750.c
+++ b/drivers/staging/sm750fb/sm750.c
@@ -375,7 +375,6 @@ static int lynxfb_ops_set_par(struct fb_info *info)
line_length = var->xres_virtual * var->bits_per_pixel / 8;
line_length = ALIGN(line_length, crtc->line_pad);
fix->line_length = line_length;
- pr_info("fix->line_length = %d\n", fix->line_length);
/*
* var->red,green,blue,transp are need to be set by driver
@@ -485,11 +484,6 @@ static int lynxfb_ops_check_var(struct fb_var_screeninfo *var,
par = info->par;
crtc = &par->crtc;
- pr_debug("check var:%dx%d-%d\n",
- var->xres,
- var->yres,
- var->bits_per_pixel);
-
ret = lynxfb_set_color_offsets(info);
if (ret) {
@@ -580,7 +574,6 @@ static int lynxfb_ops_blank(int blank, struct fb_info *info)
struct lynxfb_par *par;
struct lynxfb_output *output;
- pr_debug("blank = %d.\n", blank);
par = info->par;
output = &par->output;
sm750_dev = par->dev;
@@ -625,7 +618,6 @@ static int sm750fb_set_drv(struct lynxfb_par *par)
crtc->channel = sm750_primary;
crtc->o_screen = 0;
crtc->v_screen = sm750_dev->pvMem;
- pr_info("use simul primary mode\n");
break;
case sm750_simul_sec:
output->paths = sm750_pnc;
@@ -767,7 +759,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
crtc->cursor.mmio = sm750_dev->pvReg +
0x800f0 + (int)crtc->channel * 0x140;
- pr_info("crtc->cursor.mmio = %p\n", crtc->cursor.mmio);
crtc->cursor.max_h = 64;
crtc->cursor.max_w = 64;
crtc->cursor.size = crtc->cursor.max_h * crtc->cursor.max_w * 2 / 8;
@@ -811,11 +802,8 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
g_fbmode[index],
mdb_desc[i]);
break;
- } else if (ret == 3) {
- pr_warn("wanna use default mode\n");
- /*break;*/
- } else if (ret == 4) {
- pr_warn("fall back to any valid mode\n");
+ } else if (ret == 3 || ret == 4) {
+ continue;
} else {
pr_warn("ret = %d,fb_find_mode failed,with %s\n",
ret,
@@ -823,25 +811,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
}
}
- /* some member of info->var had been set by fb_find_mode */
-
- pr_info("Member of info->var is :\n"
- "xres=%d\n"
- "yres=%d\n"
- "xres_virtual=%d\n"
- "yres_virtual=%d\n"
- "xoffset=%d\n"
- "yoffset=%d\n"
- "bits_per_pixel=%d\n"
- " ...\n",
- var->xres,
- var->yres,
- var->xres_virtual,
- var->yres_virtual,
- var->xoffset,
- var->yoffset,
- var->bits_per_pixel);
-
/* set par */
par->info = info;
@@ -851,7 +820,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
info->pseudo_palette = &par->pseudo_palette[0];
info->screen_base = crtc->v_screen;
- pr_debug("screen_base vaddr = %p\n", info->screen_base);
info->screen_size = line_length * var->yres_virtual;
/* set info->fix */
@@ -865,7 +833,6 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
strscpy(fix->id, fixId[index], sizeof(fix->id));
fix->smem_start = crtc->o_screen + sm750_dev->vidmem_start;
- pr_info("fix->smem_start = %lx\n", fix->smem_start);
/*
* according to mmap experiment from user space application,
* fix->mmio_len should not larger than virtual size
@@ -874,13 +841,10 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
* data into the bound over virtual size
*/
fix->smem_len = crtc->vidmem_size;
- pr_info("fix->smem_len = %x\n", fix->smem_len);
info->screen_size = fix->smem_len;
fix->line_length = line_length;
fix->mmio_start = sm750_dev->vidreg_start;
- pr_info("fix->mmio_start = %lx\n", fix->mmio_start);
fix->mmio_len = sm750_dev->vidreg_size;
- pr_info("fix->mmio_len = %x\n", fix->mmio_len);
lynxfb_set_visual_mode(info);
@@ -889,22 +853,12 @@ static int lynxfb_set_fbinfo(struct fb_info *info, int index)
var->accel_flags = 0;
var->vmode = FB_VMODE_NONINTERLACED;
- pr_debug("#1 show info->cmap :\nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n",
- info->cmap.start, info->cmap.len,
- info->cmap.red, info->cmap.green, info->cmap.blue,
- info->cmap.transp);
-
ret = fb_alloc_cmap(&info->cmap, 256, 0);
if (ret < 0) {
pr_err("Could not allocate memory for cmap.\n");
goto exit;
}
- pr_debug("#2 show info->cmap :\nstart=%d,len=%d,red=%p,green=%p,blue=%p,transp=%p\n",
- info->cmap.start, info->cmap.len,
- info->cmap.red, info->cmap.green, info->cmap.blue,
- info->cmap.transp);
-
exit:
lynxfb_ops_check_var(var, info);
return ret;
@@ -934,9 +888,6 @@ static void sm750fb_setup(struct sm750_dev *sm750_dev, char *src)
}
while ((opt = strsep(&src, ":")) != NULL && *opt != 0) {
- dev_info(&sm750_dev->pdev->dev, "opt=%s\n", opt);
- dev_info(&sm750_dev->pdev->dev, "src=%s\n", src);
-
if (!strcmp(opt, "swap")) {
swap = 1;
} else if (!strcmp(opt, "nocrt")) {
diff --git a/drivers/staging/sm750fb/sm750_hw.c b/drivers/staging/sm750fb/sm750_hw.c
index ce46f240c..e3e4b75d6 100644
--- a/drivers/staging/sm750fb/sm750_hw.c
+++ b/drivers/staging/sm750fb/sm750_hw.c
@@ -34,8 +34,6 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
sm750_dev->vidreg_start = pci_resource_start(pdev, 1);
sm750_dev->vidreg_size = SZ_2M;
- pr_info("mmio phyAddr = %lx\n", sm750_dev->vidreg_start);
-
/*
* reserve the vidreg space of smi adaptor
* if you do this, you need to add release region code
@@ -56,7 +54,6 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
ret = -EFAULT;
goto exit;
}
- pr_info("mmio virtual addr = %p\n", sm750_dev->pvReg);
sm750_dev->accel.dpr_base = sm750_dev->pvReg + DE_BASE_ADDR_TYPE1;
sm750_dev->accel.dp_port_base = sm750_dev->pvReg + DE_PORT_ADDR_TYPE1;
@@ -72,8 +69,6 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
* @ddk750_get_vm_size function can be safe.
*/
sm750_dev->vidmem_size = ddk750_get_vm_size();
- pr_info("video memory phyAddr = %lx, size = %u bytes\n",
- sm750_dev->vidmem_start, sm750_dev->vidmem_size);
/* reserve the vidmem space of smi adaptor */
sm750_dev->pvMem =
@@ -84,7 +79,6 @@ int hw_sm750_map(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
ret = -EFAULT;
goto exit;
}
- pr_info("video memory vaddr = %p\n", sm750_dev->pvMem);
exit:
return ret;
}
@@ -163,11 +157,9 @@ int hw_sm750_inithw(struct sm750_dev *sm750_dev, struct pci_dev *pdev)
* The following register values for CH7301 are from
* Chrontel app note and our experiment.
*/
- pr_info("yes,CH7301 DVI chip found\n");
sm750_sw_i2c_write_reg(0xec, 0x1d, 0x16);
sm750_sw_i2c_write_reg(0xec, 0x21, 0x9);
sm750_sw_i2c_write_reg(0xec, 0x49, 0xC0);
- pr_info("okay,CH7301 DVI chip setup done\n");
}
}
--
2.43.0
next prev parent reply other threads:[~2026-02-04 12:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-04 12:05 [PATCH v3 1/5] staging: sm750fb: replace strcat() with memcpy() in lynxfb_setup() Artem Lytkin
2026-02-04 12:05 ` [PATCH v3 2/5] staging: sm750fb: use strcmp() for exact option matching Artem Lytkin
2026-02-07 13:31 ` Greg Kroah-Hartman
2026-02-04 12:06 ` Artem Lytkin [this message]
2026-02-07 13:32 ` [PATCH v3 3/5] staging: sm750fb: remove debug and diagnostic prints Greg Kroah-Hartman
2026-02-04 12:06 ` [PATCH v3 4/5] staging: sm750fb: convert logging to device-based in sm750.c Artem Lytkin
2026-02-04 12:06 ` [PATCH v3 5/5] staging: sm750fb: convert logging to device-based in sm750_hw.c Artem Lytkin
2026-02-07 13:27 ` [PATCH v3 1/5] staging: sm750fb: replace strcat() with memcpy() in lynxfb_setup() Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260204120602.6715-3-iprintercanon@gmail.com \
--to=iprintercanon@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
--cc=sudipm.mukherjee@gmail.com \
--cc=teddy.wang@siliconmotion.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox