From: Dorjoy Chowdhury <dorjoychy111@gmail.com>
To: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, viro@zeniv.linux.org.uk,
brauner@kernel.org, jack@suse.cz, jlayton@kernel.org,
chuck.lever@oracle.com, alex.aring@gmail.com, arnd@arndb.de,
adilger@dilger.ca, mjguzik@gmail.com, smfrench@gmail.com
Subject: [PATCH v4 3/4] sparc/fcntl.h: convert O_* flag macros from hex to octal
Date: Sat, 7 Feb 2026 01:03:38 +0600 [thread overview]
Message-ID: <20260206190536.57289-4-dorjoychy111@gmail.com> (raw)
In-Reply-To: <20260206190536.57289-1-dorjoychy111@gmail.com>
Following the convention in include/uapi/asm-generic/fcntl.h and other
architecture specific arch/*/include/uapi/asm/fcntl.h files.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
---
arch/sparc/include/uapi/asm/fcntl.h | 36 ++++++++++++++---------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/arch/sparc/include/uapi/asm/fcntl.h b/arch/sparc/include/uapi/asm/fcntl.h
index bb6e9fa94bc9..33ce58ec57f6 100644
--- a/arch/sparc/include/uapi/asm/fcntl.h
+++ b/arch/sparc/include/uapi/asm/fcntl.h
@@ -2,23 +2,23 @@
#ifndef _SPARC_FCNTL_H
#define _SPARC_FCNTL_H
-#define O_APPEND 0x0008
-#define FASYNC 0x0040 /* fcntl, for BSD compatibility */
-#define O_CREAT 0x0200 /* not fcntl */
-#define O_TRUNC 0x0400 /* not fcntl */
-#define O_EXCL 0x0800 /* not fcntl */
-#define O_DSYNC 0x2000 /* used to be O_SYNC, see below */
-#define O_NONBLOCK 0x4000
+#define O_APPEND 0000000010
+#define FASYNC 0000000100 /* fcntl, for BSD compatibility */
+#define O_CREAT 0000001000 /* not fcntl */
+#define O_TRUNC 0000002000 /* not fcntl */
+#define O_EXCL 0000004000 /* not fcntl */
+#define O_DSYNC 0000020000 /* used to be O_SYNC, see below */
+#define O_NONBLOCK 0000040000
#if defined(__sparc__) && defined(__arch64__)
-#define O_NDELAY 0x0004
+#define O_NDELAY 0000000004
#else
-#define O_NDELAY (0x0004 | O_NONBLOCK)
+#define O_NDELAY (0000000004 | O_NONBLOCK)
#endif
-#define O_NOCTTY 0x8000 /* not fcntl */
-#define O_LARGEFILE 0x40000
-#define O_DIRECT 0x100000 /* direct disk access hint */
-#define O_NOATIME 0x200000
-#define O_CLOEXEC 0x400000
+#define O_NOCTTY 0000100000 /* not fcntl */
+#define O_LARGEFILE 0001000000
+#define O_DIRECT 0004000000 /* direct disk access hint */
+#define O_NOATIME 0010000000
+#define O_CLOEXEC 0020000000
/*
* Before Linux 2.6.33 only O_DSYNC semantics were implemented, but using
* the O_SYNC flag. We continue to use the existing numerical value
@@ -32,12 +32,12 @@
*
* Note: __O_SYNC must never be used directly.
*/
-#define __O_SYNC 0x800000
+#define __O_SYNC 0040000000
#define O_SYNC (__O_SYNC|O_DSYNC)
-#define O_PATH 0x1000000
-#define __O_TMPFILE 0x2000000
-#define OPENAT2_REGULAR 0x4000000
+#define O_PATH 0100000000
+#define __O_TMPFILE 0200000000
+#define OPENAT2_REGULAR 0400000000
#define F_GETOWN 5 /* for sockets. */
#define F_SETOWN 6 /* for sockets. */
--
2.53.0
next prev parent reply other threads:[~2026-02-06 19:06 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-06 19:03 [PATCH v4 0/4] openat2: new OPENAT2_REGULAR flag support Dorjoy Chowdhury
2026-02-06 19:03 ` [PATCH v4 1/4] " Dorjoy Chowdhury
2026-02-06 19:03 ` [PATCH v4 2/4] kselftest/openat2: test for OPENAT2_REGULAR flag Dorjoy Chowdhury
2026-02-06 19:03 ` Dorjoy Chowdhury [this message]
2026-02-06 19:03 ` [PATCH v4 4/4] mips/fcntl.h: convert O_* flag macros from hex to octal Dorjoy Chowdhury
2026-02-11 16:05 ` [PATCH v4 0/4] openat2: new OPENAT2_REGULAR flag support Dorjoy Chowdhury
2026-02-18 15:23 ` Dorjoy Chowdhury
-- strict thread matches above, loose matches on Subject: below --
2026-02-21 14:45 [PATCH v4 0/4] OPENAT2_REGULAR flag support in openat2 Dorjoy Chowdhury
2026-02-21 14:45 ` [PATCH v4 3/4] sparc/fcntl.h: convert O_* flag macros from hex to octal Dorjoy Chowdhury
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260206190536.57289-4-dorjoychy111@gmail.com \
--to=dorjoychy111@gmail.com \
--cc=adilger@dilger.ca \
--cc=alex.aring@gmail.com \
--cc=arnd@arndb.de \
--cc=brauner@kernel.org \
--cc=chuck.lever@oracle.com \
--cc=jack@suse.cz \
--cc=jlayton@kernel.org \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjguzik@gmail.com \
--cc=smfrench@gmail.com \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox