From: Xu Yang <xu.yang_2@nxp.com>
To: gregkh@linuxfoundation.org, m.grzeschik@pengutronix.de,
stern@rowland.harvard.edu
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, jun.li@nxp.com
Subject: [PATCH] usb: port: add delay after usb_hub_set_port_power()
Date: Wed, 11 Feb 2026 18:36:28 +0800 [thread overview]
Message-ID: <20260211103628.3265850-1-xu.yang_2@nxp.com> (raw)
When disable the root hub port, somehow the device is disconnected and
re-connected again. This happens because usb_clear_port_feature() does not
clear a truly happened port change. That says, in fact, port change event
may happen after usb_clear_port_feature() is called. Then the subsequent
port change event will have impact on usb device suspend routine.
Below log shows what is happening:
$ echo 1 > usb1-port1/disable
[ 37.958239] usb 1-1: USB disconnect, device number 2
[ 37.964101] usb 1-1: unregistering device
[ 37.970070] hub 1-0:1.0: hub_suspend
[ 37.971305] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002
[ 37.974412] usb usb1: bus auto-suspend, wakeup 1
[ 37.988175] usb usb1: suspend raced with wakeup event <---
[ 37.993947] usb usb1: usb auto-resume
[ 37.998401] hub 1-0:1.0: hub_resume
[ 38.105688] usb usb1-port1: status 0000, change 0000, 12 Mb/s
[ 38.112399] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 38.118645] hub 1-0:1.0: hub_suspend
[ 38.122963] usb usb1: bus auto-suspend, wakeup 1
[ 38.200368] usb usb1: usb wakeup-resume
[ 38.204982] usb usb1: usb auto-resume
[ 38.209376] hub 1-0:1.0: hub_resume
[ 38.213676] usb usb1-port1: status 0101 change 0001
[ 38.321552] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000
[ 38.327978] usb usb1-port1: status 0101, change 0000, 12 Mb/s
[ 38.457429] usb 1-1: new high-speed USB device number 3 using ci_hdrc
To fix the issue, add delay after usb_hub_set_port_power(). So port change
bit will be fixed to the final state and usb_clear_port_feature() can
correctly clear it after this period. This will also avoid usb runtime
suspend routine to run because usb_autopm_put_interface() not run yet.
Fixes: f061f43d7418 ("usb: hub: port: add sysfs entry to switch port power")
Cc: stable@kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
---
drivers/usb/core/port.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index f54198171b6a..a47df5d32f7c 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -141,6 +141,7 @@ static ssize_t disable_store(struct device *dev, struct device_attribute *attr,
usb_disconnect(&port_dev->child);
rc = usb_hub_set_port_power(hdev, hub, port1, !disabled);
+ msleep(2 * hub_power_on_good_delay(hub));
if (disabled) {
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
--
2.34.1
next reply other threads:[~2026-02-11 10:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-11 10:36 Xu Yang [this message]
2026-02-11 11:19 ` [PATCH] usb: port: add delay after usb_hub_set_port_power() Greg KH
2026-02-12 10:19 ` Xu Yang
2026-02-11 15:04 ` Alan Stern
2026-02-11 15:47 ` Greg KH
2026-02-11 16:07 ` Alan Stern
2026-02-12 10:20 ` Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260211103628.3265850-1-xu.yang_2@nxp.com \
--to=xu.yang_2@nxp.com \
--cc=gregkh@linuxfoundation.org \
--cc=imx@lists.linux.dev \
--cc=jun.li@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=m.grzeschik@pengutronix.de \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox