[PATCH 1/2] dt-bindings: iio: dac: add support for Microchip MCP48FEB02

[Ariana Lazar <ariana.lazar@microchip.com>]

This is the device tree schema for iio driver for Microchip
MCP48FxBy1/2/4/8 series of buffered voltage output Digital-to-Analog
Converters with nonvolatile or volatile memory and an SPI Interface.

The families support up to 8 output channels.

The devices can be 8-bit, 10-bit and 12-bit.

Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com>
---
 .../bindings/iio/dac/microchip,mcp48feb02.yaml     | 299 +++++++++++++++++++++
 MAINTAINERS                                        |   6 +
 2 files changed, 305 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/dac/microchip,mcp48feb02.yaml b/Documentation/devicetree/bindings/iio/dac/microchip,mcp48feb02.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..78c6bd641c6e37321e4fc056db83eb4277f429b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/dac/microchip,mcp48feb02.yaml
@@ -0,0 +1,299 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/dac/microchip,mcp48feb02.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip MCP48F(E/V)B(0/1/2)(1/2/4/8) DAC with SPI Interface Families
+
+maintainers:
+  - Ariana Lazar <ariana.lazar@microchip.com>
+
+description: |
+  Datasheet for MCP48FEB01, MCP48FEB02, MCP48FEB11, MCP48FEB12, MCP48FEB21,
+  MCP48FEB22 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/20005429B.pdf
+  Datasheet for MCP48FVB01, MCP48FVB02, MCP48FVB11, MCP48FVB12, MCP48FVB21,
+  MCP48FVB22 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/20005466A.pdf
+  Datasheet for MCP48FEB04, MCP48FEB14, MCP48FEB24, MCP48FEB08, MCP48FEB18,
+  MCP48FEB28, MCP48FVB04, MCP48FVB14, MCP48FVB24, MCP48FVB08, MCP48FVB18,
+  MCP48FVB28 can be found here:
+    https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP48FXBX4-8-Family-Data-Sheet-DS20006362A.pdf
+
+  +------------+--------------+-------------+-------------+------------+
+  | Device     |  Resolution  |   Channels  | Vref number | Memory     |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP48FEB01 |              |      1      |      1      |   EEPROM   |
+  | MCP48FEB02 |     8-bit    |      2      |      1      |   EEPROM   |
+  | MCP48FEB04 |              |      4      |      2      |   EEPROM   |
+  | MCP48FEB08 |              |      8      |      2      |   EEPROM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP48FEB11 |              |      1      |      1      |   EEPROM   |
+  | MCP48FEB12 |    10-bit    |      2      |      1      |   EEPROM   |
+  | MCP48FEB14 |              |      4      |      2      |   EEPROM   |
+  | MCP48FEB18 |              |      8      |      2      |   EEPROM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP48FEB21 |              |      1      |      1      |   EEPROM   |
+  | MCP48FEB22 |    12-bit    |      2      |      1      |   EEPROM   |
+  | MCP48FEB24 |              |      4      |      2      |   EEPROM   |
+  | MCP48FEB28 |              |      8      |      2      |   EEPROM   |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP48FVB01 |              |      1      |      1      |   RAM      |
+  | MCP48FVB02 |     8-bit    |      2      |      1      |   RAM      |
+  | MCP48FVB04 |              |      4      |      2      |   RAM      |
+  | MCP48FVB08 |              |      8      |      2      |   RAM      |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP48FVB11 |              |      1      |      1      |   RAM      |
+  | MCP48FVB12 |    10-bit    |      2      |      1      |   RAM      |
+  | MCP48FVB14 |              |      4      |      2      |   RAM      |
+  | MCP48FVB18 |              |      8      |      2      |   RAM      |
+  |------------|--------------|-------------|-------------|------------|
+  | MCP48FVB21 |              |      1      |      1      |   RAM      |
+  | MCP48FVB22 |    12-bit    |      2      |      1      |   RAM      |
+  | MCP48FVB24 |              |      4      |      2      |   RAM      |
+  | MCP48FVB28 |              |      8      |      2      |   RAM      |
+  +------------+--------------+-------------+-------------+------------+
+
+properties:
+  compatible:
+    enum:
+      - microchip,mcp48feb01
+      - microchip,mcp48feb02
+      - microchip,mcp48feb04
+      - microchip,mcp48feb08
+      - microchip,mcp48feb11
+      - microchip,mcp48feb12
+      - microchip,mcp48feb14
+      - microchip,mcp48feb18
+      - microchip,mcp48feb21
+      - microchip,mcp48feb22
+      - microchip,mcp48feb24
+      - microchip,mcp48feb28
+      - microchip,mcp48fvb01
+      - microchip,mcp48fvb02
+      - microchip,mcp48fvb04
+      - microchip,mcp48fvb08
+      - microchip,mcp48fvb11
+      - microchip,mcp48fvb12
+      - microchip,mcp48fvb14
+      - microchip,mcp48fvb18
+      - microchip,mcp48fvb21
+      - microchip,mcp48fvb22
+      - microchip,mcp48fvb24
+      - microchip,mcp48fvb28
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  vdd-supply:
+    description:
+      Provides power to the chip and it could be used as reference voltage. The
+      voltage is used to calculate scale. For parts without EEPROM at powerup
+      this will be the selected as voltage reference.
+
+  vref-supply:
+    description: |
+      Vref pin (it could be found as Vref0 into the datasheet) may be used as a
+      voltage reference when this supply is specified. The internal reference
+      will be taken into account for voltage reference besides VDD if this supply
+      does not exist.
+
+      This supply will be voltage reference for the following outputs:
+        - for single-channel device: Vout0;
+        - for dual-channel device: Vout0, Vout1;
+        - for quad-channel device: Vout0, Vout2;
+        - for octal-channel device: Vout0, Vout2, Vout4, Vout6;
+
+  vref1-supply:
+    description: |
+      Vref1 pin may be used as a voltage reference when this supply is specified.
+      The internal reference will be taken into account for voltage reference
+      beside VDD if this supply does not exist.
+
+      This supply will be voltage reference for the following outputs:
+        - for quad-channel device: Vout1, Vout3;
+        - for octal-channel device: Vout1, Vout3, Vout5, Vout7;
+
+  lat-gpios:
+    description:
+      LAT pin to be used as a hardware trigger to synchronously update the DAC
+      channels. The pin is active Low. It could be also found as LAT0 in
+      datasheet.
+    maxItems: 1
+
+  lat1-gpios:
+    description:
+      LAT1 pin to be used as a hardware trigger to synchronously update the odd
+      DAC channels on devices with 4 and 8 channels. The pin is active Low.
+    maxItems: 1
+
+  microchip,vref-buffered:
+    type: boolean
+    description:
+      Enable buffering of the external Vref/Vref0 pin in cases where the
+      external reference voltage does not have sufficient current capability in
+      order not to drop its voltage when connected to the internal resistor
+      ladder circuit.
+
+  microchip,vref1-buffered:
+    type: boolean
+    description:
+      Enable buffering of the external Vref1 pin in cases where the external
+      reference voltage does not have sufficient current capability in order not
+      to drop its voltage when connected to the internal resistor ladder
+      circuit.
+
+patternProperties:
+  "^channel@[0-7]$":
+    $ref: dac.yaml
+    type: object
+    description: Voltage output channel.
+
+    properties:
+      reg:
+        description: The channel number.
+        maxItems: 1
+
+      label:
+        description: Unique name to identify which channel this is.
+
+    required:
+      - reg
+
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp48feb01
+              - microchip,mcp48feb11
+              - microchip,mcp48feb21
+              - microchip,mcp48fvb01
+              - microchip,mcp48fvb11
+              - microchip,mcp48fvb21
+    then:
+      properties:
+        lat1-gpios: false
+        vref1-supply: false
+        microchip,vref1-buffered: false
+        channel@0:
+          properties:
+            reg:
+              const: 0
+      patternProperties:
+        "^channel@[1-7]$": false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp48feb02
+              - microchip,mcp48feb12
+              - microchip,mcp48feb22
+              - microchip,mcp48fvb02
+              - microchip,mcp48fvb12
+              - microchip,mcp48fvb22
+    then:
+      properties:
+        lat1-gpios: false
+        vref1-supply: false
+        microchip,vref1-buffered: false
+      patternProperties:
+        "^channel@[0-1]$":
+          properties:
+            reg:
+              enum: [0, 1]
+        "^channel@[2-7]$": false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp48fvb04
+              - microchip,mcp48fvb14
+              - microchip,mcp48fvb24
+              - microchip,mcp48feb04
+              - microchip,mcp48feb14
+              - microchip,mcp48feb24
+    then:
+      patternProperties:
+        "^channel@[0-3]$":
+          properties:
+            reg:
+              enum: [0, 1, 2, 3]
+        "^channel@[4-7]$": false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microchip,mcp48fvb08
+              - microchip,mcp48fvb18
+              - microchip,mcp48fvb28
+              - microchip,mcp48feb08
+              - microchip,mcp48feb18
+              - microchip,mcp48feb28
+    then:
+      patternProperties:
+        "^channel@[0-7]$":
+          properties:
+            reg:
+              enum: [0, 1, 2, 3, 4, 5, 6, 7]
+  - if:
+      not:
+        required:
+          - vref-supply
+    then:
+      properties:
+        microchip,vref-buffered: false
+  - if:
+      not:
+        required:
+          - vref1-supply
+    then:
+      properties:
+        microchip,vref1-buffered: false
+
+additionalProperties: false
+
+examples:
+    - |
+      spi {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          dac@0 {
+            compatible = "microchip,mcp48feb08";
+            reg = <0>;
+            vdd-supply = <&vdac_vdd>;
+            vref-supply = <&vref_reg>;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+            channel@0 {
+              reg = <0>;
+              label = "Adjustable_voltage_ch0";
+            };
+
+            channel@1 {
+              reg = <0x1>;
+              label = "Adjustable_voltage_ch1";
+            };
+          };
+      };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index a92290fffa163f9fe8fe3f04bf66426f9a894409..ed24fd2758ad0103dbc5191d0ec180f8ee5e8298 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14945,6 +14945,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/iio/dac/microchip,mcp4821.yaml
 F:	drivers/iio/dac/mcp4821.c
 
+MCP48FEB02 MICROCHIP DAC DRIVER
+M:	Ariana Lazar <ariana.lazar@microchip.com>
+L:	linux-iio@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/iio/dac/microchip,mcp48feb02.yaml
+
 MCR20A IEEE-802.15.4 RADIO DRIVER
 M:	Stefan Schmidt <stefan@datenfreihafen.org>
 L:	linux-wpan@vger.kernel.org

-- 
2.43.0