[PATCH v8 2/9] thermal/drivers/exynos: Use devm_clk_get_enabled() helpers

[Anand Moon <linux.amoon@gmail.com>]

Use devm_clk_get_enabled() helper instead of calling devm_clk_get() and
then clk_prepare_enable(). It simplifies the error handling and makes
the code more compact.

Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v7: None
v6: New patch as per Daniel request.
---
 drivers/thermal/samsung/exynos_tmu.c | 77 ++++++++--------------------
 1 file changed, 20 insertions(+), 57 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 04517d52afbd..aa0726b33c84 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -1036,65 +1036,41 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	data->clk = devm_clk_get(dev, "tmu_apbif");
+	data->clk = devm_clk_get_enabled(dev, "tmu_apbif");
 	if (IS_ERR(data->clk))
-		return dev_err_probe(dev, PTR_ERR(data->clk), "Failed to get clock\n");
-
-	ret = clk_prepare(data->clk);
-	if (ret) {
-		dev_err(dev, "Failed to get clock\n");
-		return ret;
-	}
-
-	switch (data->soc) {
-	case SOC_ARCH_EXYNOS5420_TRIMINFO:
-		data->clk_sec = devm_clk_get(dev, "tmu_triminfo_apbif");
-		if (IS_ERR(data->clk_sec)) {
-			ret = dev_err_probe(dev, PTR_ERR(data->clk_sec),
-					    "Failed to get clk_sec clock\n");
-			goto err_clk;
-		}
-		ret = clk_prepare(data->clk_sec);
-		if (ret) {
-			dev_err(dev, "Failed to prepare clk_sec clock\n");
-			goto err_clk_sec;
-		}
-		break;
-	case SOC_ARCH_EXYNOS5433:
-	case SOC_ARCH_EXYNOS7:
-		data->sclk = devm_clk_get(dev, "tmu_sclk");
-		if (IS_ERR(data->sclk)) {
-			ret = dev_err_probe(dev, PTR_ERR(data->sclk), "Failed to get sclk\n");
-			goto err_clk;
-		} else {
-			ret = clk_prepare_enable(data->sclk);
-			if (ret) {
-				dev_err(dev, "Failed to enable sclk\n");
-				goto err_clk;
-			}
-		}
-		break;
-	default:
-		break;
+		return dev_err_probe(dev, PTR_ERR(data->clk),
+				     "Failed to get clock\n");
+
+	if (data->soc == SOC_ARCH_EXYNOS5420_TRIMINFO) {
+		data->clk_sec = devm_clk_get_enabled(dev, "tmu_triminfo_apbif");
+		if (IS_ERR(data->clk_sec))
+			return dev_err_probe(dev, PTR_ERR(data->clk_sec),
+					     "Failed to get clk_sec clock\n");
+	} else if (data->soc == SOC_ARCH_EXYNOS5433 ||
+		   data->soc == SOC_ARCH_EXYNOS7) {
+		data->sclk = devm_clk_get_enabled(dev, "tmu_sclk");
+		if (IS_ERR(data->sclk))
+			return dev_err_probe(dev, PTR_ERR(data->sclk),
+					     "Failed to get sclk\n");
 	}
 
 	ret = exynos_tmu_initialize(pdev);
 	if (ret) {
 		dev_err(dev, "Failed to initialize TMU\n");
-		goto err_sclk;
+		return ret;
 	}
 
 	data->tzd = devm_thermal_of_zone_register(dev, 0, data,
 						  &exynos_sensor_ops);
 	if (IS_ERR(data->tzd)) {
-		ret = dev_err_probe(dev, PTR_ERR(data->tzd), "Failed to register sensor\n");
-		goto err_sclk;
+		return dev_err_probe(dev, PTR_ERR(data->tzd),
+				     "Failed to register sensor\n");
 	}
 
 	ret = exynos_thermal_zone_configure(pdev);
 	if (ret) {
 		dev_err(dev, "Failed to configure the thermal zone\n");
-		goto err_sclk;
+		return ret;
 	}
 
 	ret = devm_request_threaded_irq(dev, data->irq, NULL,
@@ -1104,30 +1080,17 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 					dev_name(dev), data);
 	if (ret) {
 		dev_err(dev, "Failed to request irq: %d\n", data->irq);
-		goto err_sclk;
+		return ret;
 	}
 
 	exynos_tmu_control(pdev, true);
-	return 0;
 
-err_sclk:
-	clk_disable_unprepare(data->sclk);
-err_clk_sec:
-	clk_unprepare(data->clk_sec);
-err_clk:
-	clk_unprepare(data->clk);
 	return ret;
 }
 
 static void exynos_tmu_remove(struct platform_device *pdev)
 {
-	struct exynos_tmu_data *data = platform_get_drvdata(pdev);
-
 	exynos_tmu_control(pdev, false);
-
-	clk_disable_unprepare(data->sclk);
-	clk_unprepare(data->clk);
-	clk_unprepare(data->clk_sec);
 }
 
 #ifdef CONFIG_PM_SLEEP
-- 
2.50.1