* [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27
@ 2026-02-11 20:59 Frank Li
2026-02-11 21:00 ` [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML Frank Li
` (4 more replies)
0 siblings, 5 replies; 10+ messages in thread
From: Frank Li @ 2026-02-11 20:59 UTC (permalink / raw)
To: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sascha Hauer
Cc: linux-gpio, devicetree, imx, linux-arm-kernel, linux-kernel,
Frank Li
Cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27.
1. convert txt to yaml format.
2. rename node name to pinmux.
3. remove redundant intermediate node in pinmux hierarchy at dts.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Frank Li (4):
dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML
dt-bindings: pinctrl: imx35: add compatible string fsl,imx25-iomuxc
ARM: dts: imx: rename iomuxc to pinmux
ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy
.../bindings/pinctrl/fsl,imx27-iomuxc.yaml | 126 ++++++++++++
.../bindings/pinctrl/fsl,imx27-pinctrl.txt | 121 -----------
.../bindings/pinctrl/fsl,imx35-pinctrl.yaml | 1 +
arch/arm/boot/dts/nxp/imx/imx1-ads.dts | 108 +++++-----
arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts | 92 ++++-----
arch/arm/boot/dts/nxp/imx/imx1.dtsi | 2 +-
.../boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi | 38 ++--
.../imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts | 6 +-
.../nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts | 134 ++++++------
arch/arm/boot/dts/nxp/imx/imx25-pdk.dts | 190 +++++++++--------
arch/arm/boot/dts/nxp/imx/imx25.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx27-apf27.dts | 58 +++---
arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts | 194 +++++++++---------
.../boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi | 228 ++++++++++-----------
.../nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts | 194 +++++++++---------
arch/arm/boot/dts/nxp/imx/imx27-pdk.dts | 132 ++++++------
.../dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts | 92 ++++-----
.../dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi | 174 ++++++++--------
.../boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts | 206 +++++++++----------
.../boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi | 154 +++++++-------
arch/arm/boot/dts/nxp/imx/imx27.dtsi | 2 +-
21 files changed, 1115 insertions(+), 1139 deletions(-)
---
base-commit: ff0a13607e585c9e2158911d0173b9a47ac8624b
change-id: 20260211-imx2_iomux_warning-5675f186e249
Best regards,
--
Frank Li <Frank.Li@nxp.com>
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML
2026-02-11 20:59 [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27 Frank Li
@ 2026-02-11 21:00 ` Frank Li
2026-02-18 18:39 ` Rob Herring
2026-02-24 9:02 ` Linus Walleij
2026-02-11 21:00 ` [PATCH 2/4] dt-bindings: pinctrl: imx35: add compatible string fsl,imx25-iomuxc Frank Li
` (3 subsequent siblings)
4 siblings, 2 replies; 10+ messages in thread
From: Frank Li @ 2026-02-11 21:00 UTC (permalink / raw)
To: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sascha Hauer
Cc: linux-gpio, devicetree, imx, linux-arm-kernel, linux-kernel,
Frank Li
Convert fsl,imx27-pinctrl.txt to YAML format.
Additional changes:
- Add the compatible string "fsl,imx1-iomuxc".
- Add gpio@... child nodes.
- Add ranges property.
- Remove the redundant intermediate node between pinmux and group nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
.../bindings/pinctrl/fsl,imx27-iomuxc.yaml | 126 +++++++++++++++++++++
.../bindings/pinctrl/fsl,imx27-pinctrl.txt | 121 --------------------
2 files changed, 126 insertions(+), 121 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-iomuxc.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-iomuxc.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..1254bfcaa7cb6b2d3c66cb0e0e47b968a951d9f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-iomuxc.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/fsl,imx27-iomuxc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX1/i.MX25/i.MX27 IOMUX Controller
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+description:
+ Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+ for common binding part and usage.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx1-iomuxc
+ - fsl,imx27-iomuxc
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ ranges: true
+
+patternProperties:
+ '^gpio@[0-9a-f]+$':
+ type: object
+ $ref: /schemas/gpio/fsl-imx-gpio.yaml
+ unevaluatedProperties: false
+
+ 'grp$':
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+
+ properties:
+ fsl,pins:
+ description:
+ three integers array, represents a group of pins mux and config
+ setting. The format is fsl,pins = <PIN MUX_ID CONFIG>.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description:
+ PIN is an integer between 0 and 0xbf. imx27 has 6 ports with 32
+ configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN
+ is the pin number on the specific port (between 0 and 31)
+ - description: |
+ MUX_ID is function + (direction << 2) + (gpio_oconf << 4)
+ + (gpio_iconfa << 8) + (gpio_iconfb << 10)
+
+ function value is used to select the pin function.
+ Possible values:
+ 0 - Primary function
+ 1 - Alternate function
+ 2 - GPIO
+ Registers: GIUS (GPIO In Use), GPR (General Purpose Register)
+
+ direction defines the data direction of the pin.
+ Possible values:
+ 0 - Input
+ 1 - Output
+ Register: DDIR
+
+ gpio_oconf configures the gpio submodule output signal.
+ This does not have any effect unless GPIO function is
+ selected. A/B/C_IN are output signals of function blocks
+ A,B and C. Specific function blocks are described in the
+ reference manual.
+ Possible values:
+ 0 - A_IN
+ 1 - B_IN
+ 2 - C_IN
+ 3 - Data Register
+ Registers: OCR1, OCR2
+
+ gpio_iconfa/b configures the gpio submodule input to
+ functionblocks A and B. GPIO function should be selected if
+ this is configured.
+ Possible values:
+ 0 - GPIO_IN
+ 1 - Interrupt Status Register
+ 2 - Pulldown
+ 3 - Pullup
+ Registers ICONFA1, ICONFA2, ICONFB1 and ICONFB2
+
+ - description:
+ CONFIG can be 0 or 1, meaning Pullup disable/enable.
+ required:
+ - fsl,pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pinmux@10015000 {
+ compatible = "fsl,imx27-iomuxc";
+ reg = <0x10015000 0x600>;
+
+ uartgrp {
+ fsl,pins = <
+ 0x8c 0x004 0x0 /* UART1_TXD__UART1_TXD */
+ 0x8d 0x000 0x0 /* UART1_RXD__UART1_RXD */
+ 0x8e 0x004 0x0 /* UART1_CTS__UART1_CTS */
+ 0x8f 0x000 0x0 /* UART1_RTS__UART1_RTS */
+ >;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
deleted file mode 100644
index d1706ea8257230121f2843bd7684faccd160198b..0000000000000000000000000000000000000000
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-* Freescale IMX27 IOMUX Controller
-
-Required properties:
-- compatible: "fsl,imx27-iomuxc"
-
-The iomuxc driver node should define subnodes containing of pinctrl configuration subnodes.
-
-Required properties for pin configuration node:
-- fsl,pins: three integers array, represents a group of pins mux and config
- setting. The format is fsl,pins = <PIN MUX_ID CONFIG>.
-
- PIN is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
- configurable pins each. PIN is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- number on the specific port (between 0 and 31).
-
- MUX_ID is
- function + (direction << 2) + (gpio_oconf << 4) + (gpio_iconfa << 8) + (gpio_iconfb << 10)
-
- function value is used to select the pin function.
- Possible values:
- 0 - Primary function
- 1 - Alternate function
- 2 - GPIO
- Registers: GIUS (GPIO In Use), GPR (General Purpose Register)
-
- direction defines the data direction of the pin.
- Possible values:
- 0 - Input
- 1 - Output
- Register: DDIR
-
- gpio_oconf configures the gpio submodule output signal. This does not
- have any effect unless GPIO function is selected. A/B/C_IN are output
- signals of function blocks A,B and C. Specific function blocks are
- described in the reference manual.
- Possible values:
- 0 - A_IN
- 1 - B_IN
- 2 - C_IN
- 3 - Data Register
- Registers: OCR1, OCR2
-
- gpio_iconfa/b configures the gpio submodule input to functionblocks A and
- B. GPIO function should be selected if this is configured.
- Possible values:
- 0 - GPIO_IN
- 1 - Interrupt Status Register
- 2 - Pulldown
- 3 - Pullup
- Registers ICONFA1, ICONFA2, ICONFB1 and ICONFB2
-
- CONFIG can be 0 or 1, meaning Pullup disable/enable.
-
-
-The iomux controller has gpio child nodes which are embedded in the iomux
-control registers. They have to be defined as child nodes of the iomux device
-node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges"
-properties for the iomux device node are required.
-
-Example:
-
-iomuxc: iomuxc@10015000 {
- compatible = "fsl,imx27-iomuxc";
- reg = <0x10015000 0x600>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio1: gpio@10015000 {
- ...
- };
-
- ...
-
- uart {
- pinctrl_uart1: uart-1 {
- fsl,pins = <
- 0x8c 0x004 0x0 /* UART1_TXD__UART1_TXD */
- 0x8d 0x000 0x0 /* UART1_RXD__UART1_RXD */
- 0x8e 0x004 0x0 /* UART1_CTS__UART1_CTS */
- 0x8f 0x000 0x0 /* UART1_RTS__UART1_RTS */
- >;
- };
-
- ...
- };
-};
-
-
-For convenience there are macros defined in imx27-pinfunc.h which provide PIN
-and MUX_ID. They are structured as MX27_PAD_<Pad name>__<Signal name>. The names
-are defined in the i.MX27 reference manual.
-
-The above example using macros:
-
-iomuxc: iomuxc@10015000 {
- compatible = "fsl,imx27-iomuxc";
- reg = <0x10015000 0x600>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio1: gpio@10015000 {
- ...
- };
-
- ...
-
- uart {
- pinctrl_uart1: uart-1 {
- fsl,pins = <
- MX27_PAD_UART1_TXD__UART1_TXD 0x0
- MX27_PAD_UART1_RXD__UART1_RXD 0x0
- MX27_PAD_UART1_CTS__UART1_CTS 0x0
- MX27_PAD_UART1_RTS__UART1_RTS 0x0
- >;
- };
-
- ...
- };
-};
--
2.43.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/4] dt-bindings: pinctrl: imx35: add compatible string fsl,imx25-iomuxc
2026-02-11 20:59 [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27 Frank Li
2026-02-11 21:00 ` [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML Frank Li
@ 2026-02-11 21:00 ` Frank Li
2026-02-12 11:45 ` Krzysztof Kozlowski
2026-02-24 9:02 ` Linus Walleij
2026-02-11 21:00 ` [PATCH 3/4] ARM: dts: imx: rename iomuxc to pinmux Frank Li
` (2 subsequent siblings)
4 siblings, 2 replies; 10+ messages in thread
From: Frank Li @ 2026-02-11 21:00 UTC (permalink / raw)
To: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sascha Hauer
Cc: linux-gpio, devicetree, imx, linux-arm-kernel, linux-kernel,
Frank Li
Add compatible string fsl,imx25-iomuxc.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml
index 265c43ab76f4c3323d45162c01aa3cacfef53a3e..846e110062b2ad815a849ae0ff1e186d4daa1e07 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml
@@ -20,6 +20,7 @@ properties:
compatible:
oneOf:
- enum:
+ - fsl,imx25-iomuxc
- fsl,imx35-iomuxc
- fsl,imx51-iomuxc
- fsl,imx53-iomuxc
--
2.43.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 3/4] ARM: dts: imx: rename iomuxc to pinmux
2026-02-11 20:59 [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27 Frank Li
2026-02-11 21:00 ` [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML Frank Li
2026-02-11 21:00 ` [PATCH 2/4] dt-bindings: pinctrl: imx35: add compatible string fsl,imx25-iomuxc Frank Li
@ 2026-02-11 21:00 ` Frank Li
2026-02-11 21:00 ` [PATCH 4/4] ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy Frank Li
2026-03-02 16:44 ` (subset) [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27 Frank Li
4 siblings, 0 replies; 10+ messages in thread
From: Frank Li @ 2026-02-11 21:00 UTC (permalink / raw)
To: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sascha Hauer
Cc: linux-gpio, devicetree, imx, linux-arm-kernel, linux-kernel,
Frank Li
Rename node name iomuxc to pinmux. Fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx1-apf9328.dtb: iomuxc@21c000 (fsl,imx1-iomuxc): $nodename:0: 'iomuxc@21c000' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
from schema $id: http://devicetree.org/schemas/pinctrl/fsl,imx27-iomuxc.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm/boot/dts/nxp/imx/imx1.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx25.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx27.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx1.dtsi b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
index a1a89ccacf05589216d80e2b00bba2a1c3b32e62..ed04a907b3f795e45ce37963143915be05b56789 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx1.dtsi
@@ -202,7 +202,7 @@ clks: ccm@21b000 {
#clock-cells = <1>;
};
- iomuxc: iomuxc@21c000 {
+ iomuxc: pinmux@21c000 {
compatible = "fsl,imx1-iomuxc";
reg = <0x0021c000 0x1000>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
index 82601a4b7b4b5a90d744217beda68b19fbbb6767..54a116533c45883d9a2f7823a2e48b2f82a17b1e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25.dtsi
@@ -195,7 +195,7 @@ kpp: kpp@43fa8000 {
status = "disabled";
};
- iomuxc: iomuxc@43fac000 {
+ iomuxc: pinmux@43fac000 {
compatible = "fsl,imx25-iomuxc";
reg = <0x43fac000 0x4000>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
index 989b7659b6692afe23884748a58aa5a8484ff4f3..3a8ca1c3f179361870d95136b1141c147132c840 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27.dtsi
@@ -289,7 +289,7 @@ sdhci2: mmc@10014000 {
status = "disabled";
};
- iomuxc: iomuxc@10015000 {
+ iomuxc: pinmux@10015000 {
compatible = "fsl,imx27-iomuxc";
reg = <0x10015000 0x600>;
#address-cells = <1>;
--
2.43.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 4/4] ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy
2026-02-11 20:59 [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27 Frank Li
` (2 preceding siblings ...)
2026-02-11 21:00 ` [PATCH 3/4] ARM: dts: imx: rename iomuxc to pinmux Frank Li
@ 2026-02-11 21:00 ` Frank Li
2026-03-02 16:44 ` (subset) [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27 Frank Li
4 siblings, 0 replies; 10+ messages in thread
From: Frank Li @ 2026-02-11 21:00 UTC (permalink / raw)
To: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sascha Hauer
Cc: linux-gpio, devicetree, imx, linux-arm-kernel, linux-kernel,
Frank Li
Remove the redundant intermediate node between the pinmux and group nodes,
and add the missing "grp" suffix to the group node names.
Fix below CHECK_DTBS warnings:
arm/boot/dts/nxp/imx/imx27-apf27dev.dtb: iomuxc@10015000 (fsl,imx27-iomuxc): Unevaluated properties are not allowed ('imx27-apf27', 'imx27-apf27dev' were unexpected)
from schema $id: http://devicetree.org/schemas/pinctrl/fsl,imx27-iomuxc.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm/boot/dts/nxp/imx/imx1-ads.dts | 108 +++++-----
arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts | 92 ++++-----
.../boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi | 38 ++--
.../imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts | 6 +-
.../nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts | 134 ++++++------
arch/arm/boot/dts/nxp/imx/imx25-pdk.dts | 190 +++++++++--------
arch/arm/boot/dts/nxp/imx/imx27-apf27.dts | 58 +++---
arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts | 194 +++++++++---------
.../boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi | 228 ++++++++++-----------
.../nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts | 194 +++++++++---------
arch/arm/boot/dts/nxp/imx/imx27-pdk.dts | 132 ++++++------
.../dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts | 92 ++++-----
.../dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi | 174 ++++++++--------
.../boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts | 206 +++++++++----------
.../boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi | 154 +++++++-------
15 files changed, 985 insertions(+), 1015 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx1-ads.dts b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
index 2c817c4a4c68f8ec9e100db747762067c7a4b483..823e7c42910b8c21c12159ca12f9c1e7f5e4c770 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-ads.dts
@@ -76,60 +76,58 @@ nor: flash@0,0 {
};
&iomuxc {
- imx1-ads {
- pinctrl_cspi1: cspi1grp {
- fsl,pins = <
- MX1_PAD_SPI1_MISO__SPI1_MISO 0x0
- MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x0
- MX1_PAD_SPI1_RDY__SPI1_RDY 0x0
- MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x0
- MX1_PAD_SPI1_SS__GPIO3_15 0x0
- >;
- };
-
- pinctrl_i2c: i2cgrp {
- fsl,pins = <
- MX1_PAD_I2C_SCL__I2C_SCL 0x0
- MX1_PAD_I2C_SDA__I2C_SDA 0x0
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX1_PAD_UART1_TXD__UART1_TXD 0x0
- MX1_PAD_UART1_RXD__UART1_RXD 0x0
- MX1_PAD_UART1_CTS__UART1_CTS 0x0
- MX1_PAD_UART1_RTS__UART1_RTS 0x0
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX1_PAD_UART2_TXD__UART2_TXD 0x0
- MX1_PAD_UART2_RXD__UART2_RXD 0x0
- MX1_PAD_UART2_CTS__UART2_CTS 0x0
- MX1_PAD_UART2_RTS__UART2_RTS 0x0
- >;
- };
-
- pinctrl_weim: weimgrp {
- fsl,pins = <
- MX1_PAD_A0__A0 0x0
- MX1_PAD_A16__A16 0x0
- MX1_PAD_A17__A17 0x0
- MX1_PAD_A18__A18 0x0
- MX1_PAD_A19__A19 0x0
- MX1_PAD_A20__A20 0x0
- MX1_PAD_A21__A21 0x0
- MX1_PAD_A22__A22 0x0
- MX1_PAD_A23__A23 0x0
- MX1_PAD_A24__A24 0x0
- MX1_PAD_BCLK__BCLK 0x0
- MX1_PAD_CS4__CS4 0x0
- MX1_PAD_DTACK__DTACK 0x0
- MX1_PAD_ECB__ECB 0x0
- MX1_PAD_LBA__LBA 0x0
- >;
- };
+ pinctrl_cspi1: cspi1grp {
+ fsl,pins = <
+ MX1_PAD_SPI1_MISO__SPI1_MISO 0x0
+ MX1_PAD_SPI1_MOSI__SPI1_MOSI 0x0
+ MX1_PAD_SPI1_RDY__SPI1_RDY 0x0
+ MX1_PAD_SPI1_SCLK__SPI1_SCLK 0x0
+ MX1_PAD_SPI1_SS__GPIO3_15 0x0
+ >;
+ };
+
+ pinctrl_i2c: i2cgrp {
+ fsl,pins = <
+ MX1_PAD_I2C_SCL__I2C_SCL 0x0
+ MX1_PAD_I2C_SDA__I2C_SDA 0x0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX1_PAD_UART1_TXD__UART1_TXD 0x0
+ MX1_PAD_UART1_RXD__UART1_RXD 0x0
+ MX1_PAD_UART1_CTS__UART1_CTS 0x0
+ MX1_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX1_PAD_UART2_TXD__UART2_TXD 0x0
+ MX1_PAD_UART2_RXD__UART2_RXD 0x0
+ MX1_PAD_UART2_CTS__UART2_CTS 0x0
+ MX1_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
+
+ pinctrl_weim: weimgrp {
+ fsl,pins = <
+ MX1_PAD_A0__A0 0x0
+ MX1_PAD_A16__A16 0x0
+ MX1_PAD_A17__A17 0x0
+ MX1_PAD_A18__A18 0x0
+ MX1_PAD_A19__A19 0x0
+ MX1_PAD_A20__A20 0x0
+ MX1_PAD_A21__A21 0x0
+ MX1_PAD_A22__A22 0x0
+ MX1_PAD_A23__A23 0x0
+ MX1_PAD_A24__A24 0x0
+ MX1_PAD_BCLK__BCLK 0x0
+ MX1_PAD_CS4__CS4 0x0
+ MX1_PAD_DTACK__DTACK 0x0
+ MX1_PAD_ECB__ECB 0x0
+ MX1_PAD_LBA__LBA 0x0
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
index 058e9435524fe1d12a95e7dba36ec92a073403b3..794e5bfee36706e64f0f23850a9307d04f4747f3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -67,56 +67,54 @@ eth: ethernet@4,c00000 {
};
&iomuxc {
- imx1-apf9328 {
- pinctrl_eth: ethgrp {
- fsl,pins = <
- MX1_PAD_SIM_SVEN__GPIO2_14 0x0
- >;
- };
+ pinctrl_eth: ethgrp {
+ fsl,pins = <
+ MX1_PAD_SIM_SVEN__GPIO2_14 0x0
+ >;
+ };
- pinctrl_i2c: i2cgrp {
- fsl,pins = <
- MX1_PAD_I2C_SCL__I2C_SCL 0x0
- MX1_PAD_I2C_SDA__I2C_SDA 0x0
- >;
- };
+ pinctrl_i2c: i2cgrp {
+ fsl,pins = <
+ MX1_PAD_I2C_SCL__I2C_SCL 0x0
+ MX1_PAD_I2C_SDA__I2C_SDA 0x0
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX1_PAD_UART1_TXD__UART1_TXD 0x0
- MX1_PAD_UART1_RXD__UART1_RXD 0x0
- MX1_PAD_UART1_CTS__UART1_CTS 0x0
- MX1_PAD_UART1_RTS__UART1_RTS 0x0
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX1_PAD_UART1_TXD__UART1_TXD 0x0
+ MX1_PAD_UART1_RXD__UART1_RXD 0x0
+ MX1_PAD_UART1_CTS__UART1_CTS 0x0
+ MX1_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX1_PAD_UART2_TXD__UART2_TXD 0x0
- MX1_PAD_UART2_RXD__UART2_RXD 0x0
- MX1_PAD_UART2_CTS__UART2_CTS 0x0
- MX1_PAD_UART2_RTS__UART2_RTS 0x0
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX1_PAD_UART2_TXD__UART2_TXD 0x0
+ MX1_PAD_UART2_RXD__UART2_RXD 0x0
+ MX1_PAD_UART2_CTS__UART2_CTS 0x0
+ MX1_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
- pinctrl_weim: weimgrp {
- fsl,pins = <
- MX1_PAD_A0__A0 0x0
- MX1_PAD_A16__A16 0x0
- MX1_PAD_A17__A17 0x0
- MX1_PAD_A18__A18 0x0
- MX1_PAD_A19__A19 0x0
- MX1_PAD_A20__A20 0x0
- MX1_PAD_A21__A21 0x0
- MX1_PAD_A22__A22 0x0
- MX1_PAD_A23__A23 0x0
- MX1_PAD_A24__A24 0x0
- MX1_PAD_BCLK__BCLK 0x0
- MX1_PAD_CS4__CS4 0x0
- MX1_PAD_DTACK__DTACK 0x0
- MX1_PAD_ECB__ECB 0x0
- MX1_PAD_LBA__LBA 0x0
- >;
- };
+ pinctrl_weim: weimgrp {
+ fsl,pins = <
+ MX1_PAD_A0__A0 0x0
+ MX1_PAD_A16__A16 0x0
+ MX1_PAD_A17__A17 0x0
+ MX1_PAD_A18__A18 0x0
+ MX1_PAD_A19__A19 0x0
+ MX1_PAD_A20__A20 0x0
+ MX1_PAD_A21__A21 0x0
+ MX1_PAD_A22__A22 0x0
+ MX1_PAD_A23__A23 0x0
+ MX1_PAD_A24__A24 0x0
+ MX1_PAD_BCLK__BCLK 0x0
+ MX1_PAD_CS4__CS4 0x0
+ MX1_PAD_DTACK__DTACK 0x0
+ MX1_PAD_ECB__ECB 0x0
+ MX1_PAD_LBA__LBA 0x0
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
index 93a6e4e680b45133885a7c04693ae2e49dd1db85..31dc2a6403628db1527a1707460afbf9de893abd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-cpuimx25.dtsi
@@ -34,27 +34,25 @@ rtc@51 {
};
&iomuxc {
- imx25-eukrea-cpuimx25 {
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
- MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
- MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
- MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
- MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
- MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
- >;
- };
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
- MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
+ MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index 6cddb2cc36fe2aa4a07cad18c0fc9f2014314c1f..e08fcbfef4d5d97897943f64b9ce9c8d91104d05 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -43,10 +43,8 @@ reg_lcd_3v3: regulator-0 {
};
&iomuxc {
- imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
- pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
- fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
- };
+ pinctrl_reg_lcd_3v3: reg_lcd_3v3grp {
+ fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts
index c7207ea437c404399213b2f4939af22159e1ea68..cf127e00793effbd7231972f464b0dc03dfa6bfe 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -68,80 +68,78 @@ tlv320aic23: codec@1a {
};
&iomuxc {
- imx25-eukrea-mbimxsd25-baseboard {
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0
- MX25_PAD_KPP_COL2__AUD5_TXC 0xe0
- MX25_PAD_KPP_COL1__AUD5_RXD 0xe0
- MX25_PAD_KPP_COL0__AUD5_TXD 0xe0
- >;
- };
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX25_PAD_KPP_COL3__AUD5_TXFS 0xe0
+ MX25_PAD_KPP_COL2__AUD5_TXC 0xe0
+ MX25_PAD_KPP_COL1__AUD5_RXD 0xe0
+ MX25_PAD_KPP_COL0__AUD5_TXD 0xe0
+ >;
+ };
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <
- MX25_PAD_SD1_CMD__ESDHC1_CMD 0x400000c0
- MX25_PAD_SD1_CLK__ESDHC1_CLK 0x400000c0
- MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x400000c0
- MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x400000c0
- MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x400000c0
- MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x400000c0
- >;
- };
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX25_PAD_SD1_CMD__ESDHC1_CMD 0x400000c0
+ MX25_PAD_SD1_CLK__ESDHC1_CLK 0x400000c0
+ MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x400000c0
+ MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x400000c0
+ MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x400000c0
+ MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x400000c0
+ >;
+ };
- pinctrl_gpiokeys: gpiokeysgrp {
- fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
- };
+ pinctrl_gpiokeys: gpiokeysgrp {
+ fsl,pins = <MX25_PAD_VSTBY_ACK__GPIO_3_18 0x80000000>;
+ };
- pinctrl_gpioled: gpioledgrp {
- fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
- };
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <MX25_PAD_POWER_FAIL__GPIO_3_19 0x80000000>;
+ };
- pinctrl_lcdc: lcdcgrp {
- fsl,pins = <
- MX25_PAD_LD0__LD0 0x1
- MX25_PAD_LD1__LD1 0x1
- MX25_PAD_LD2__LD2 0x1
- MX25_PAD_LD3__LD3 0x1
- MX25_PAD_LD4__LD4 0x1
- MX25_PAD_LD5__LD5 0x1
- MX25_PAD_LD6__LD6 0x1
- MX25_PAD_LD7__LD7 0x1
- MX25_PAD_LD8__LD8 0x1
- MX25_PAD_LD9__LD9 0x1
- MX25_PAD_LD10__LD10 0x1
- MX25_PAD_LD11__LD11 0x1
- MX25_PAD_LD12__LD12 0x1
- MX25_PAD_LD13__LD13 0x1
- MX25_PAD_LD14__LD14 0x1
- MX25_PAD_LD15__LD15 0x1
- MX25_PAD_GPIO_E__LD16 0x1
- MX25_PAD_GPIO_F__LD17 0x1
- MX25_PAD_HSYNC__HSYNC 0x80000000
- MX25_PAD_VSYNC__VSYNC 0x80000000
- MX25_PAD_LSCLK__LSCLK 0x80000000
- MX25_PAD_OE_ACD__OE_ACD 0x80000000
- MX25_PAD_CONTRAST__CONTRAST 0x80000000
- >;
- };
+ pinctrl_lcdc: lcdcgrp {
+ fsl,pins = <
+ MX25_PAD_LD0__LD0 0x1
+ MX25_PAD_LD1__LD1 0x1
+ MX25_PAD_LD2__LD2 0x1
+ MX25_PAD_LD3__LD3 0x1
+ MX25_PAD_LD4__LD4 0x1
+ MX25_PAD_LD5__LD5 0x1
+ MX25_PAD_LD6__LD6 0x1
+ MX25_PAD_LD7__LD7 0x1
+ MX25_PAD_LD8__LD8 0x1
+ MX25_PAD_LD9__LD9 0x1
+ MX25_PAD_LD10__LD10 0x1
+ MX25_PAD_LD11__LD11 0x1
+ MX25_PAD_LD12__LD12 0x1
+ MX25_PAD_LD13__LD13 0x1
+ MX25_PAD_LD14__LD14 0x1
+ MX25_PAD_LD15__LD15 0x1
+ MX25_PAD_GPIO_E__LD16 0x1
+ MX25_PAD_GPIO_F__LD17 0x1
+ MX25_PAD_HSYNC__HSYNC 0x80000000
+ MX25_PAD_VSYNC__VSYNC 0x80000000
+ MX25_PAD_LSCLK__LSCLK 0x80000000
+ MX25_PAD_OE_ACD__OE_ACD 0x80000000
+ MX25_PAD_CONTRAST__CONTRAST 0x80000000
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX25_PAD_UART1_RTS__UART1_RTS 0xe0
- MX25_PAD_UART1_CTS__UART1_CTS 0xe0
- MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
- MX25_PAD_UART1_RXD__UART1_RXD 0xc0
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX25_PAD_UART1_RTS__UART1_RTS 0xe0
+ MX25_PAD_UART1_CTS__UART1_CTS 0xe0
+ MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+ MX25_PAD_UART1_RXD__UART1_RXD 0xc0
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX25_PAD_UART2_RXD__UART2_RXD 0x80000000
- MX25_PAD_UART2_TXD__UART2_TXD 0x80000000
- MX25_PAD_UART2_RTS__UART2_RTS 0x80000000
- MX25_PAD_UART2_CTS__UART2_CTS 0x80000000
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX25_PAD_UART2_RXD__UART2_RXD 0x80000000
+ MX25_PAD_UART2_TXD__UART2_TXD 0x80000000
+ MX25_PAD_UART2_RTS__UART2_RTS 0x80000000
+ MX25_PAD_UART2_CTS__UART2_CTS 0x80000000
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
index dd176fb54e58595b34a8cd2c35769f341729895a..a35778ba6ffa0474d67f77005dfa4299b27d947c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx25-pdk.dts
@@ -130,109 +130,107 @@ codec: sgtl5000@a {
};
&iomuxc {
- imx25-pdk {
- pinctrl_audmux: audmuxgrp {
- fsl,pins = <
- MX25_PAD_RW__AUD4_TXFS 0xe0
- MX25_PAD_OE__AUD4_TXC 0xe0
- MX25_PAD_EB0__AUD4_TXD 0xe0
- MX25_PAD_EB1__AUD4_RXD 0xe0
- >;
- };
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX25_PAD_RW__AUD4_TXFS 0xe0
+ MX25_PAD_OE__AUD4_TXC 0xe0
+ MX25_PAD_EB0__AUD4_TXD 0xe0
+ MX25_PAD_EB1__AUD4_RXD 0xe0
+ >;
+ };
- pinctrl_can1: can1grp {
- fsl,pins = <
- MX25_PAD_GPIO_A__CAN1_TX 0x0
- MX25_PAD_GPIO_B__CAN1_RX 0x0
- MX25_PAD_D14__GPIO_4_6 0x80000000
- >;
- };
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX25_PAD_GPIO_A__CAN1_TX 0x0
+ MX25_PAD_GPIO_B__CAN1_RX 0x0
+ MX25_PAD_D14__GPIO_4_6 0x80000000
+ >;
+ };
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <
- MX25_PAD_SD1_CMD__ESDHC1_CMD 0x80000000
- MX25_PAD_SD1_CLK__ESDHC1_CLK 0x80000000
- MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000
- MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000
- MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000
- MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
- MX25_PAD_A14__GPIO_2_0 0x80000000
- MX25_PAD_A15__GPIO_2_1 0x80000000
- >;
- };
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX25_PAD_SD1_CMD__ESDHC1_CMD 0x80000000
+ MX25_PAD_SD1_CLK__ESDHC1_CLK 0x80000000
+ MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000
+ MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000
+ MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000
+ MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
+ MX25_PAD_A14__GPIO_2_0 0x80000000
+ MX25_PAD_A15__GPIO_2_1 0x80000000
+ >;
+ };
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
- MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
- MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
- MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
- MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
- MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
- MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
- MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
- MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
- MX25_PAD_A17__GPIO_2_3 0x80000000
- MX25_PAD_D12__GPIO_4_8 0x80000000
- >;
- };
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
+ MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
+ MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
+ MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
+ MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
+ MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
+ MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
+ MX25_PAD_A17__GPIO_2_3 0x80000000
+ MX25_PAD_D12__GPIO_4_8 0x80000000
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
- MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
+ MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
+ >;
+ };
- pinctrl_kpp: kppgrp {
- fsl,pins = <
- MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000
- MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000
- MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000
- MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000
- MX25_PAD_KPP_COL0__KPP_COL0 0x80000000
- MX25_PAD_KPP_COL1__KPP_COL1 0x80000000
- MX25_PAD_KPP_COL2__KPP_COL2 0x80000000
- MX25_PAD_KPP_COL3__KPP_COL3 0x80000000
- >;
- };
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000
+ MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000
+ MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000
+ MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000
+ MX25_PAD_KPP_COL0__KPP_COL0 0x80000000
+ MX25_PAD_KPP_COL1__KPP_COL1 0x80000000
+ MX25_PAD_KPP_COL2__KPP_COL2 0x80000000
+ MX25_PAD_KPP_COL3__KPP_COL3 0x80000000
+ >;
+ };
- pinctrl_lcd: lcdgrp {
- fsl,pins = <
- MX25_PAD_LD0__LD0 0xe0
- MX25_PAD_LD1__LD1 0xe0
- MX25_PAD_LD2__LD2 0xe0
- MX25_PAD_LD3__LD3 0xe0
- MX25_PAD_LD4__LD4 0xe0
- MX25_PAD_LD5__LD5 0xe0
- MX25_PAD_LD6__LD6 0xe0
- MX25_PAD_LD7__LD7 0xe0
- MX25_PAD_LD8__LD8 0xe0
- MX25_PAD_LD9__LD9 0xe0
- MX25_PAD_LD10__LD10 0xe0
- MX25_PAD_LD11__LD11 0xe0
- MX25_PAD_LD12__LD12 0xe0
- MX25_PAD_LD13__LD13 0xe0
- MX25_PAD_LD14__LD14 0xe0
- MX25_PAD_LD15__LD15 0xe0
- MX25_PAD_GPIO_E__LD16 0xe0
- MX25_PAD_GPIO_F__LD17 0xe0
- MX25_PAD_HSYNC__HSYNC 0xe0
- MX25_PAD_VSYNC__VSYNC 0xe0
- MX25_PAD_LSCLK__LSCLK 0xe0
- MX25_PAD_OE_ACD__OE_ACD 0xe0
- MX25_PAD_CONTRAST__CONTRAST 0xe0
- >;
- };
+ pinctrl_lcd: lcdgrp {
+ fsl,pins = <
+ MX25_PAD_LD0__LD0 0xe0
+ MX25_PAD_LD1__LD1 0xe0
+ MX25_PAD_LD2__LD2 0xe0
+ MX25_PAD_LD3__LD3 0xe0
+ MX25_PAD_LD4__LD4 0xe0
+ MX25_PAD_LD5__LD5 0xe0
+ MX25_PAD_LD6__LD6 0xe0
+ MX25_PAD_LD7__LD7 0xe0
+ MX25_PAD_LD8__LD8 0xe0
+ MX25_PAD_LD9__LD9 0xe0
+ MX25_PAD_LD10__LD10 0xe0
+ MX25_PAD_LD11__LD11 0xe0
+ MX25_PAD_LD12__LD12 0xe0
+ MX25_PAD_LD13__LD13 0xe0
+ MX25_PAD_LD14__LD14 0xe0
+ MX25_PAD_LD15__LD15 0xe0
+ MX25_PAD_GPIO_E__LD16 0xe0
+ MX25_PAD_GPIO_F__LD17 0xe0
+ MX25_PAD_HSYNC__HSYNC 0xe0
+ MX25_PAD_VSYNC__VSYNC 0xe0
+ MX25_PAD_LSCLK__LSCLK 0xe0
+ MX25_PAD_OE_ACD__OE_ACD 0xe0
+ MX25_PAD_CONTRAST__CONTRAST 0xe0
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX25_PAD_UART1_RTS__UART1_RTS 0xe0
- MX25_PAD_UART1_CTS__UART1_CTS 0xe0
- MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
- MX25_PAD_UART1_RXD__UART1_RXD 0xc0
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX25_PAD_UART1_RTS__UART1_RTS 0xe0
+ MX25_PAD_UART1_CTS__UART1_CTS 0xe0
+ MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
+ MX25_PAD_UART1_RXD__UART1_RXD 0xc0
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts
index 745d5d40995251ddb3ed33ddc41686ed27db00a8..b67bb21af3dedf1124ccdff6a1ac3ef703a6e22d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27.dts
@@ -24,36 +24,34 @@ &clk_osc26m {
};
&iomuxc {
- imx27-apf27 {
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- MX27_PAD_SD3_CMD__FEC_TXD0 0x0
- MX27_PAD_SD3_CLK__FEC_TXD1 0x0
- MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
- MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
- MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
- MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
- MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
- MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
- MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
- MX27_PAD_ATA_DATA7__FEC_MDC 0x0
- MX27_PAD_ATA_DATA8__FEC_CRS 0x0
- MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
- MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
- MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
- MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
- MX27_PAD_ATA_DATA13__FEC_COL 0x0
- MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
- MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX27_PAD_UART1_TXD__UART1_TXD 0x0
- MX27_PAD_UART1_RXD__UART1_RXD 0x0
- >;
- };
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
index 849306cb4532dbdeb5302ee1c66256247eda645f..dba97912cfd75964ee4a2966fae897e7f0b037e7 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-apf27dev.dts
@@ -122,116 +122,114 @@ &i2c2 {
};
&iomuxc {
- imx27-apf27dev {
- pinctrl_cspi1: cspi1grp {
- fsl,pins = <
- MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
- MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
- MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
- >;
- };
+ pinctrl_cspi1: cspi1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+ MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+ >;
+ };
- pinctrl_cspi1_cs: cspi1csgrp {
- fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
- };
+ pinctrl_cspi1_cs: cspi1csgrp {
+ fsl,pins = <MX27_PAD_CSPI1_SS0__GPIO4_28 0x0>;
+ };
- pinctrl_cspi2: cspi2grp {
- fsl,pins = <
- MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
- MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
- MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
- >;
- };
+ pinctrl_cspi2: cspi2grp {
+ fsl,pins = <
+ MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+ MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+ MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+ >;
+ };
- pinctrl_cspi2_cs: cspi2csgrp {
- fsl,pins = <
- MX27_PAD_CSI_D5__GPIO2_17 0x0
- MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
- MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
- >;
- };
+ pinctrl_cspi2_cs: cspi2csgrp {
+ fsl,pins = <
+ MX27_PAD_CSI_D5__GPIO2_17 0x0
+ MX27_PAD_CSPI2_SS0__GPIO4_21 0x0
+ MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+ >;
+ };
- pinctrl_gpio_leds: gpioledsgrp {
- fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
- };
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <MX27_PAD_PC_VS1__GPIO6_14 0x0>;
+ };
- pinctrl_gpio_keys: gpiokeysgrp {
- fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
- };
+ pinctrl_gpio_keys: gpiokeysgrp {
+ fsl,pins = <MX27_PAD_PC_VS2__GPIO6_13 0x0>;
+ };
- pinctrl_imxfb1: imxfbgrp {
- fsl,pins = <
- MX27_PAD_CLS__CLS 0x0
- MX27_PAD_CONTRAST__CONTRAST 0x0
- MX27_PAD_LD0__LD0 0x0
- MX27_PAD_LD1__LD1 0x0
- MX27_PAD_LD2__LD2 0x0
- MX27_PAD_LD3__LD3 0x0
- MX27_PAD_LD4__LD4 0x0
- MX27_PAD_LD5__LD5 0x0
- MX27_PAD_LD6__LD6 0x0
- MX27_PAD_LD7__LD7 0x0
- MX27_PAD_LD8__LD8 0x0
- MX27_PAD_LD9__LD9 0x0
- MX27_PAD_LD10__LD10 0x0
- MX27_PAD_LD11__LD11 0x0
- MX27_PAD_LD12__LD12 0x0
- MX27_PAD_LD13__LD13 0x0
- MX27_PAD_LD14__LD14 0x0
- MX27_PAD_LD15__LD15 0x0
- MX27_PAD_LD16__LD16 0x0
- MX27_PAD_LD17__LD17 0x0
- MX27_PAD_LSCLK__LSCLK 0x0
- MX27_PAD_OE_ACD__OE_ACD 0x0
- MX27_PAD_PS__PS 0x0
- MX27_PAD_REV__REV 0x0
- MX27_PAD_SPL_SPR__SPL_SPR 0x0
- MX27_PAD_HSYNC__HSYNC 0x0
- MX27_PAD_VSYNC__VSYNC 0x0
- >;
- };
+ pinctrl_imxfb1: imxfbgrp {
+ fsl,pins = <
+ MX27_PAD_CLS__CLS 0x0
+ MX27_PAD_CONTRAST__CONTRAST 0x0
+ MX27_PAD_LD0__LD0 0x0
+ MX27_PAD_LD1__LD1 0x0
+ MX27_PAD_LD2__LD2 0x0
+ MX27_PAD_LD3__LD3 0x0
+ MX27_PAD_LD4__LD4 0x0
+ MX27_PAD_LD5__LD5 0x0
+ MX27_PAD_LD6__LD6 0x0
+ MX27_PAD_LD7__LD7 0x0
+ MX27_PAD_LD8__LD8 0x0
+ MX27_PAD_LD9__LD9 0x0
+ MX27_PAD_LD10__LD10 0x0
+ MX27_PAD_LD11__LD11 0x0
+ MX27_PAD_LD12__LD12 0x0
+ MX27_PAD_LD13__LD13 0x0
+ MX27_PAD_LD14__LD14 0x0
+ MX27_PAD_LD15__LD15 0x0
+ MX27_PAD_LD16__LD16 0x0
+ MX27_PAD_LD17__LD17 0x0
+ MX27_PAD_LSCLK__LSCLK 0x0
+ MX27_PAD_OE_ACD__OE_ACD 0x0
+ MX27_PAD_PS__PS 0x0
+ MX27_PAD_REV__REV 0x0
+ MX27_PAD_SPL_SPR__SPL_SPR 0x0
+ MX27_PAD_HSYNC__HSYNC 0x0
+ MX27_PAD_VSYNC__VSYNC 0x0
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX27_PAD_I2C_DATA__I2C_DATA 0x0
- MX27_PAD_I2C_CLK__I2C_CLK 0x0
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
- MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
- pinctrl_max1027: max1027 {
- fsl,pins = <
- MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */
- MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */
- >;
- };
+ pinctrl_max1027: max1027grp {
+ fsl,pins = <
+ MX27_PAD_UART1_CTS__GPIO5_14 0x0 /* CNVST */
+ MX27_PAD_UART1_RTS__GPIO5_15 0x0 /* EOC */
+ >;
+ };
- pinctrl_pwm: pwmgrp {
- fsl,pins = <
- MX27_PAD_PWMO__PWMO 0x0
- >;
- };
+ pinctrl_pwm: pwmgrp {
+ fsl,pins = <
+ MX27_PAD_PWMO__PWMO 0x0
+ >;
+ };
- pinctrl_sdhc2: sdhc2grp {
- fsl,pins = <
- MX27_PAD_SD2_CLK__SD2_CLK 0x0
- MX27_PAD_SD2_CMD__SD2_CMD 0x0
- MX27_PAD_SD2_D0__SD2_D0 0x0
- MX27_PAD_SD2_D1__SD2_D1 0x0
- MX27_PAD_SD2_D2__SD2_D2 0x0
- MX27_PAD_SD2_D3__SD2_D3 0x0
- >;
- };
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ >;
+ };
- pinctrl_sdhc2_cd: sdhc2cdgrp {
- fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
- };
+ pinctrl_sdhc2_cd: sdhc2cdgrp {
+ fsl,pins = <MX27_PAD_TOUT__GPIO3_14 0x0>;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
index c7e92358487826874e74d819af17764311016d4a..3df70ed6056c4d122c83f9d6dd1ec1af3c64ff0b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-cpuimx27.dtsi
@@ -154,131 +154,129 @@ uart8250@3,1000000 {
};
&iomuxc {
- imx27-eukrea-cpuimx27 {
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX27_PAD_SD3_CMD__FEC_TXD0 0x0
- MX27_PAD_SD3_CLK__FEC_TXD1 0x0
- MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
- MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
- MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
- MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
- MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
- MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
- MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
- MX27_PAD_ATA_DATA7__FEC_MDC 0x0
- MX27_PAD_ATA_DATA8__FEC_CRS 0x0
- MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
- MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
- MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
- MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
- MX27_PAD_ATA_DATA13__FEC_COL 0x0
- MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
- MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
- >;
- };
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX27_PAD_I2C_DATA__I2C_DATA 0x0
- MX27_PAD_I2C_CLK__I2C_CLK 0x0
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+ >;
+ };
- pinctrl_nfc: nfcgrp {
- fsl,pins = <
- MX27_PAD_NFRB__NFRB 0x0
- MX27_PAD_NFCLE__NFCLE 0x0
- MX27_PAD_NFWP_B__NFWP_B 0x0
- MX27_PAD_NFCE_B__NFCE_B 0x0
- MX27_PAD_NFALE__NFALE 0x0
- MX27_PAD_NFRE_B__NFRE_B 0x0
- MX27_PAD_NFWE_B__NFWE_B 0x0
- >;
- };
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
- pinctrl_owire: owiregrp {
- fsl,pins = <
- MX27_PAD_RTCK__OWIRE 0x0
- >;
- };
+ pinctrl_owire: owiregrp {
+ fsl,pins = <
+ MX27_PAD_RTCK__OWIRE 0x0
+ >;
+ };
- pinctrl_sdhc2: sdhc2grp {
- fsl,pins = <
- MX27_PAD_SD2_CLK__SD2_CLK 0x0
- MX27_PAD_SD2_CMD__SD2_CMD 0x0
- MX27_PAD_SD2_D0__SD2_D0 0x0
- MX27_PAD_SD2_D1__SD2_D1 0x0
- MX27_PAD_SD2_D2__SD2_D2 0x0
- MX27_PAD_SD2_D3__SD2_D3 0x0
- >;
- };
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ >;
+ };
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX27_PAD_USBH1_TXDM__UART4_TXD 0x0
- MX27_PAD_USBH1_RXDP__UART4_RXD 0x0
- MX27_PAD_USBH1_TXDP__UART4_CTS 0x0
- MX27_PAD_USBH1_FS__UART4_RTS 0x0
- >;
- };
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX27_PAD_USBH1_TXDM__UART4_TXD 0x0
+ MX27_PAD_USBH1_RXDP__UART4_RXD 0x0
+ MX27_PAD_USBH1_TXDP__UART4_CTS 0x0
+ MX27_PAD_USBH1_FS__UART4_RTS 0x0
+ >;
+ };
- pinctrl_uart8250_1: uart82501grp {
- fsl,pins = <
- MX27_PAD_USB_PWR__GPIO2_23 0x0
- >;
- };
+ pinctrl_uart8250_1: uart82501grp {
+ fsl,pins = <
+ MX27_PAD_USB_PWR__GPIO2_23 0x0
+ >;
+ };
- pinctrl_uart8250_2: uart82502grp {
- fsl,pins = <
- MX27_PAD_USBH1_SUSP__GPIO2_22 0x0
- >;
- };
+ pinctrl_uart8250_2: uart82502grp {
+ fsl,pins = <
+ MX27_PAD_USBH1_SUSP__GPIO2_22 0x0
+ >;
+ };
- pinctrl_uart8250_3: uart82503grp {
- fsl,pins = <
- MX27_PAD_USBH1_OE_B__GPIO2_27 0x0
- >;
- };
+ pinctrl_uart8250_3: uart82503grp {
+ fsl,pins = <
+ MX27_PAD_USBH1_OE_B__GPIO2_27 0x0
+ >;
+ };
- pinctrl_uart8250_4: uart82504grp {
- fsl,pins = <
- MX27_PAD_USBH1_RXDM__GPIO2_30 0x0
- >;
- };
+ pinctrl_uart8250_4: uart82504grp {
+ fsl,pins = <
+ MX27_PAD_USBH1_RXDM__GPIO2_30 0x0
+ >;
+ };
- pinctrl_usbh2: usbh2grp {
- fsl,pins = <
- MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
- MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
- MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
- MX27_PAD_USBH2_STP__USBH2_STP 0x0
- MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
- MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
- MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
- MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
- MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
- MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
- MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
- MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
- >;
- };
+ pinctrl_usbh2: usbh2grp {
+ fsl,pins = <
+ MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+ MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+ MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+ MX27_PAD_USBH2_STP__USBH2_STP 0x0
+ MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+ MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+ MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+ MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+ MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+ MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+ MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+ MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
- MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
- MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
- MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
- MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
- MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
- MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
- MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
- MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
- MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
- MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
- MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+ MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+ MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+ MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+ MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+ MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+ MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+ MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+ MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+ MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+ MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+ MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
index d78793601306cff9f353fa8814a645e5305dd4c4..1c834f2f5068d16174c086c1fe540ff371444675 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -147,113 +147,111 @@ &uart3 {
};
&iomuxc {
- imx27-eukrea-cpuimx27-baseboard {
- pinctrl_cspi1: cspi1grp {
- fsl,pins = <
- MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
- MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
- MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
- MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */
- >;
- };
+ pinctrl_cspi1: cspi1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+ MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+ MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */
+ >;
+ };
- pinctrl_backlight: backlightgrp {
- fsl,pins = <
- MX27_PAD_PWMO__GPIO5_5 0x0
- >;
- };
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX27_PAD_PWMO__GPIO5_5 0x0
+ >;
+ };
- pinctrl_gpioleds: gpioledsgrp {
- fsl,pins = <
- MX27_PAD_PC_PWRON__GPIO6_16 0x0
- MX27_PAD_PC_CD2_B__GPIO6_19 0x0
- >;
- };
+ pinctrl_gpioleds: gpioledsgrp {
+ fsl,pins = <
+ MX27_PAD_PC_PWRON__GPIO6_16 0x0
+ MX27_PAD_PC_CD2_B__GPIO6_19 0x0
+ >;
+ };
- pinctrl_imxfb: imxfbgrp {
- fsl,pins = <
- MX27_PAD_LD0__LD0 0x0
- MX27_PAD_LD1__LD1 0x0
- MX27_PAD_LD2__LD2 0x0
- MX27_PAD_LD3__LD3 0x0
- MX27_PAD_LD4__LD4 0x0
- MX27_PAD_LD5__LD5 0x0
- MX27_PAD_LD6__LD6 0x0
- MX27_PAD_LD7__LD7 0x0
- MX27_PAD_LD8__LD8 0x0
- MX27_PAD_LD9__LD9 0x0
- MX27_PAD_LD10__LD10 0x0
- MX27_PAD_LD11__LD11 0x0
- MX27_PAD_LD12__LD12 0x0
- MX27_PAD_LD13__LD13 0x0
- MX27_PAD_LD14__LD14 0x0
- MX27_PAD_LD15__LD15 0x0
- MX27_PAD_LD16__LD16 0x0
- MX27_PAD_LD17__LD17 0x0
- MX27_PAD_CONTRAST__CONTRAST 0x0
- MX27_PAD_OE_ACD__OE_ACD 0x0
- MX27_PAD_HSYNC__HSYNC 0x0
- MX27_PAD_VSYNC__VSYNC 0x0
- >;
- };
+ pinctrl_imxfb: imxfbgrp {
+ fsl,pins = <
+ MX27_PAD_LD0__LD0 0x0
+ MX27_PAD_LD1__LD1 0x0
+ MX27_PAD_LD2__LD2 0x0
+ MX27_PAD_LD3__LD3 0x0
+ MX27_PAD_LD4__LD4 0x0
+ MX27_PAD_LD5__LD5 0x0
+ MX27_PAD_LD6__LD6 0x0
+ MX27_PAD_LD7__LD7 0x0
+ MX27_PAD_LD8__LD8 0x0
+ MX27_PAD_LD9__LD9 0x0
+ MX27_PAD_LD10__LD10 0x0
+ MX27_PAD_LD11__LD11 0x0
+ MX27_PAD_LD12__LD12 0x0
+ MX27_PAD_LD13__LD13 0x0
+ MX27_PAD_LD14__LD14 0x0
+ MX27_PAD_LD15__LD15 0x0
+ MX27_PAD_LD16__LD16 0x0
+ MX27_PAD_LD17__LD17 0x0
+ MX27_PAD_CONTRAST__CONTRAST 0x0
+ MX27_PAD_OE_ACD__OE_ACD 0x0
+ MX27_PAD_HSYNC__HSYNC 0x0
+ MX27_PAD_VSYNC__VSYNC 0x0
+ >;
+ };
- pinctrl_lcdreg: lcdreggrp {
- fsl,pins = <
- MX27_PAD_CLS__GPIO1_25 0x0
- >;
- };
+ pinctrl_lcdreg: lcdreggrp {
+ fsl,pins = <
+ MX27_PAD_CLS__GPIO1_25 0x0
+ >;
+ };
- pinctrl_sdhc1: sdhc1grp {
- fsl,pins = <
- MX27_PAD_SD1_CLK__SD1_CLK 0x0
- MX27_PAD_SD1_CMD__SD1_CMD 0x0
- MX27_PAD_SD1_D0__SD1_D0 0x0
- MX27_PAD_SD1_D1__SD1_D1 0x0
- MX27_PAD_SD1_D2__SD1_D2 0x0
- MX27_PAD_SD1_D3__SD1_D3 0x0
- >;
- };
+ pinctrl_sdhc1: sdhc1grp {
+ fsl,pins = <
+ MX27_PAD_SD1_CLK__SD1_CLK 0x0
+ MX27_PAD_SD1_CMD__SD1_CMD 0x0
+ MX27_PAD_SD1_D0__SD1_D0 0x0
+ MX27_PAD_SD1_D1__SD1_D1 0x0
+ MX27_PAD_SD1_D2__SD1_D2 0x0
+ MX27_PAD_SD1_D3__SD1_D3 0x0
+ >;
+ };
- pinctrl_ssi1: ssi1grp {
- fsl,pins = <
- MX27_PAD_SSI4_CLK__SSI4_CLK 0x0
- MX27_PAD_SSI4_FS__SSI4_FS 0x0
- MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1
- MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1
- >;
- };
+ pinctrl_ssi1: ssi1grp {
+ fsl,pins = <
+ MX27_PAD_SSI4_CLK__SSI4_CLK 0x0
+ MX27_PAD_SSI4_FS__SSI4_FS 0x0
+ MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1
+ MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1
+ >;
+ };
- pinctrl_touch: touchgrp {
- fsl,pins = <
- MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */
- >;
- };
+ pinctrl_touch: touchgrp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX27_PAD_UART1_TXD__UART1_TXD 0x0
- MX27_PAD_UART1_RXD__UART1_RXD 0x0
- MX27_PAD_UART1_CTS__UART1_CTS 0x0
- MX27_PAD_UART1_RTS__UART1_RTS 0x0
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX27_PAD_UART2_TXD__UART2_TXD 0x0
- MX27_PAD_UART2_RXD__UART2_RXD 0x0
- MX27_PAD_UART2_CTS__UART2_CTS 0x0
- MX27_PAD_UART2_RTS__UART2_RTS 0x0
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX27_PAD_UART3_TXD__UART3_TXD 0x0
- MX27_PAD_UART3_RXD__UART3_RXD 0x0
- MX27_PAD_UART3_CTS__UART3_CTS 0x0
- MX27_PAD_UART3_RTS__UART3_RTS 0x0
- >;
- };
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX27_PAD_UART3_TXD__UART3_TXD 0x0
+ MX27_PAD_UART3_RXD__UART3_RXD 0x0
+ MX27_PAD_UART3_CTS__UART3_CTS 0x0
+ MX27_PAD_UART3_RTS__UART3_RTS 0x0
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
index 21d436972aa47c57f50db2636b23b45b41c02f05..2fc4ea5b9501f4765624b42f8badf013fbcdad6f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-pdk.dts
@@ -110,76 +110,74 @@ &usbotg {
};
&iomuxc {
- imx27-pdk {
- pinctrl_cspi2: cspi2grp {
- fsl,pins = <
- MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
- MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
- MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
- MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */
- MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */
- >;
- };
+ pinctrl_cspi2: cspi2grp {
+ fsl,pins = <
+ MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
+ MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
+ MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
+ MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */
+ MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */
+ >;
+ };
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX27_PAD_SD3_CMD__FEC_TXD0 0x0
- MX27_PAD_SD3_CLK__FEC_TXD1 0x0
- MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
- MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
- MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
- MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
- MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
- MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
- MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
- MX27_PAD_ATA_DATA7__FEC_MDC 0x0
- MX27_PAD_ATA_DATA8__FEC_CRS 0x0
- MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
- MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
- MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
- MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
- MX27_PAD_ATA_DATA13__FEC_COL 0x0
- MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
- MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
- >;
- };
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
- pinctrl_nand: nandgrp {
- fsl,pins = <
- MX27_PAD_NFRB__NFRB 0x0
- MX27_PAD_NFCLE__NFCLE 0x0
- MX27_PAD_NFWP_B__NFWP_B 0x0
- MX27_PAD_NFCE_B__NFCE_B 0x0
- MX27_PAD_NFALE__NFALE 0x0
- MX27_PAD_NFRE_B__NFRE_B 0x0
- MX27_PAD_NFWE_B__NFWE_B 0x0
- >;
- };
+ pinctrl_nand: nandgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX27_PAD_UART1_TXD__UART1_TXD 0x0
- MX27_PAD_UART1_RXD__UART1_RXD 0x0
- MX27_PAD_UART1_CTS__UART1_CTS 0x0
- MX27_PAD_UART1_RTS__UART1_RTS 0x0
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
- MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
- MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
- MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
- MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
- MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
- MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
- MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
- MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
- MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
- MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
- MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+ MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+ MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+ MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+ MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+ MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+ MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+ MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+ MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+ MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+ MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+ MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
index 27c93b9fe0499fc9438b713086391adf375c04dc..2b884cb3e38184d4524a95419a2bb8d36739dc0e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-rdk.dts
@@ -65,58 +65,56 @@ adc@64 {
};
&iomuxc {
- imx27-phycard-s-rdk {
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX27_PAD_I2C_DATA__I2C_DATA 0x0
- MX27_PAD_I2C_CLK__I2C_CLK 0x0
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX27_PAD_I2C_DATA__I2C_DATA 0x0
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+ >;
+ };
- pinctrl_owire1: owire1grp {
- fsl,pins = <
- MX27_PAD_RTCK__OWIRE 0x0
- >;
- };
+ pinctrl_owire1: owire1grp {
+ fsl,pins = <
+ MX27_PAD_RTCK__OWIRE 0x0
+ >;
+ };
- pinctrl_sdhc2: sdhc2grp {
- fsl,pins = <
- MX27_PAD_SD2_CLK__SD2_CLK 0x0
- MX27_PAD_SD2_CMD__SD2_CMD 0x0
- MX27_PAD_SD2_D0__SD2_D0 0x0
- MX27_PAD_SD2_D1__SD2_D1 0x0
- MX27_PAD_SD2_D2__SD2_D2 0x0
- MX27_PAD_SD2_D3__SD2_D3 0x0
- MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
- >;
- };
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX27_PAD_UART1_TXD__UART1_TXD 0x0
- MX27_PAD_UART1_RXD__UART1_RXD 0x0
- MX27_PAD_UART1_CTS__UART1_CTS 0x0
- MX27_PAD_UART1_RTS__UART1_RTS 0x0
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX27_PAD_UART2_TXD__UART2_TXD 0x0
- MX27_PAD_UART2_RXD__UART2_RXD 0x0
- MX27_PAD_UART2_CTS__UART2_CTS 0x0
- MX27_PAD_UART2_RTS__UART2_RTS 0x0
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
- pinctrl_uart3: uart3grp {
- fsl,pins = <
- MX27_PAD_UART3_TXD__UART3_TXD 0x0
- MX27_PAD_UART3_RXD__UART3_RXD 0x0
- MX27_PAD_UART3_CTS__UART3_CTS 0x0
- MX27_PAD_UART3_RTS__UART3_RTS 0x0
- >;
- };
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX27_PAD_UART3_TXD__UART3_TXD 0x0
+ MX27_PAD_UART3_RXD__UART3_RXD 0x0
+ MX27_PAD_UART3_CTS__UART3_CTS 0x0
+ MX27_PAD_UART3_RTS__UART3_RTS 0x0
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi
index 31b3fc972abbfc585c1c65eb10e006c89561dce2..2f60b3809f39b2f2c92cdb6a61664103380e3478 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycard-s-som.dtsi
@@ -58,94 +58,92 @@ eeprom@52 {
};
&iomuxc {
- imx27-phycard-s-som {
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- MX27_PAD_SD3_CMD__FEC_TXD0 0x0
- MX27_PAD_SD3_CLK__FEC_TXD1 0x0
- MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
- MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
- MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
- MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
- MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
- MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
- MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
- MX27_PAD_ATA_DATA7__FEC_MDC 0x0
- MX27_PAD_ATA_DATA8__FEC_CRS 0x0
- MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
- MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
- MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
- MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
- MX27_PAD_ATA_DATA13__FEC_COL 0x0
- MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
- MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
- >;
- };
-
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
- MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
- >;
- };
-
- pinctrl_nfc: nfcgrp {
- fsl,pins = <
- MX27_PAD_NFRB__NFRB 0x0
- MX27_PAD_NFCLE__NFCLE 0x0
- MX27_PAD_NFWP_B__NFWP_B 0x0
- MX27_PAD_NFCE_B__NFCE_B 0x0
- MX27_PAD_NFALE__NFALE 0x0
- MX27_PAD_NFRE_B__NFRE_B 0x0
- MX27_PAD_NFWE_B__NFWE_B 0x0
- >;
- };
-
- pinctrl_usbotgphy: usbotgphygrp {
- fsl,pins = <
- MX27_PAD_USBH1_RCV__GPIO2_25 0x1 /* reset gpio */
- >;
- };
-
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
- MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
- MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
- MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
- MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
- MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
- MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
- MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
- MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
- MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
- MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
- MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
- >;
- };
-
- pinctrl_usbh2phy: usbh2phygrp {
- fsl,pins = <
- MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 /* reset gpio */
- >;
- };
-
- pinctrl_usbh2: usbh2grp {
- fsl,pins = <
- MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
- MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
- MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
- MX27_PAD_USBH2_STP__USBH2_STP 0x0
- MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
- MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
- MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
- MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
- MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
- MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
- MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
- MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
- >;
- };
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
+
+ pinctrl_usbotgphy: usbotgphygrp {
+ fsl,pins = <
+ MX27_PAD_USBH1_RCV__GPIO2_25 0x1 /* reset gpio */
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+ MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+ MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+ MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+ MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+ MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+ MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+ MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+ MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+ MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+ MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+ MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+ >;
+ };
+
+ pinctrl_usbh2phy: usbh2phygrp {
+ fsl,pins = <
+ MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 /* reset gpio */
+ >;
+ };
+
+ pinctrl_usbh2: usbh2grp {
+ fsl,pins = <
+ MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+ MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+ MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+ MX27_PAD_USBH2_STP__USBH2_STP 0x0
+ MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+ MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+ MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+ MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+ MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+ MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+ MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+ MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
index 5398e9067e60f98663bec70519d719f859d6e2fa..d7136c399ae29e87a6b13d19ae6d7b9b42a28b48 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-rdk.dts
@@ -89,119 +89,117 @@ camgpio: pca9536@41 {
};
&iomuxc {
- imx27_phycore_rdk {
- pinctrl_csien: csiengrp {
- fsl,pins = <
- MX27_PAD_USB_OC_B__GPIO2_24 0x0
- >;
- };
+ pinctrl_csien: csiengrp {
+ fsl,pins = <
+ MX27_PAD_USB_OC_B__GPIO2_24 0x0
+ >;
+ };
- pinctrl_cspi1cs1: cspi1cs1grp {
- fsl,pins = <
- MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
- >;
- };
+ pinctrl_cspi1cs1: cspi1cs1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
+ >;
+ };
- pinctrl_imxfb1: imxfbgrp {
- fsl,pins = <
- MX27_PAD_LD0__LD0 0x0
- MX27_PAD_LD1__LD1 0x0
- MX27_PAD_LD2__LD2 0x0
- MX27_PAD_LD3__LD3 0x0
- MX27_PAD_LD4__LD4 0x0
- MX27_PAD_LD5__LD5 0x0
- MX27_PAD_LD6__LD6 0x0
- MX27_PAD_LD7__LD7 0x0
- MX27_PAD_LD8__LD8 0x0
- MX27_PAD_LD9__LD9 0x0
- MX27_PAD_LD10__LD10 0x0
- MX27_PAD_LD11__LD11 0x0
- MX27_PAD_LD12__LD12 0x0
- MX27_PAD_LD13__LD13 0x0
- MX27_PAD_LD14__LD14 0x0
- MX27_PAD_LD15__LD15 0x0
- MX27_PAD_LD16__LD16 0x0
- MX27_PAD_LD17__LD17 0x0
- MX27_PAD_CLS__CLS 0x0
- MX27_PAD_CONTRAST__CONTRAST 0x0
- MX27_PAD_LSCLK__LSCLK 0x0
- MX27_PAD_OE_ACD__OE_ACD 0x0
- MX27_PAD_PS__PS 0x0
- MX27_PAD_REV__REV 0x0
- MX27_PAD_SPL_SPR__SPL_SPR 0x0
- MX27_PAD_HSYNC__HSYNC 0x0
- MX27_PAD_VSYNC__VSYNC 0x0
- >;
- };
+ pinctrl_imxfb1: imxfbgrp {
+ fsl,pins = <
+ MX27_PAD_LD0__LD0 0x0
+ MX27_PAD_LD1__LD1 0x0
+ MX27_PAD_LD2__LD2 0x0
+ MX27_PAD_LD3__LD3 0x0
+ MX27_PAD_LD4__LD4 0x0
+ MX27_PAD_LD5__LD5 0x0
+ MX27_PAD_LD6__LD6 0x0
+ MX27_PAD_LD7__LD7 0x0
+ MX27_PAD_LD8__LD8 0x0
+ MX27_PAD_LD9__LD9 0x0
+ MX27_PAD_LD10__LD10 0x0
+ MX27_PAD_LD11__LD11 0x0
+ MX27_PAD_LD12__LD12 0x0
+ MX27_PAD_LD13__LD13 0x0
+ MX27_PAD_LD14__LD14 0x0
+ MX27_PAD_LD15__LD15 0x0
+ MX27_PAD_LD16__LD16 0x0
+ MX27_PAD_LD17__LD17 0x0
+ MX27_PAD_CLS__CLS 0x0
+ MX27_PAD_CONTRAST__CONTRAST 0x0
+ MX27_PAD_LSCLK__LSCLK 0x0
+ MX27_PAD_OE_ACD__OE_ACD 0x0
+ MX27_PAD_PS__PS 0x0
+ MX27_PAD_REV__REV 0x0
+ MX27_PAD_SPL_SPR__SPL_SPR 0x0
+ MX27_PAD_HSYNC__HSYNC 0x0
+ MX27_PAD_VSYNC__VSYNC 0x0
+ >;
+ };
- pinctrl_i2c1: i2c1grp {
- /* Add pullup to DATA line */
- fsl,pins = <
- MX27_PAD_I2C_DATA__I2C_DATA 0x1
- MX27_PAD_I2C_CLK__I2C_CLK 0x0
- >;
- };
+ pinctrl_i2c1: i2c1grp {
+ /* Add pullup to DATA line */
+ fsl,pins = <
+ MX27_PAD_I2C_DATA__I2C_DATA 0x1
+ MX27_PAD_I2C_CLK__I2C_CLK 0x0
+ >;
+ };
- pinctrl_owire1: owire1grp {
- fsl,pins = <
- MX27_PAD_RTCK__OWIRE 0x0
- >;
- };
+ pinctrl_owire1: owire1grp {
+ fsl,pins = <
+ MX27_PAD_RTCK__OWIRE 0x0
+ >;
+ };
- pinctrl_sdhc2: sdhc2grp {
- fsl,pins = <
- MX27_PAD_SD2_CLK__SD2_CLK 0x0
- MX27_PAD_SD2_CMD__SD2_CMD 0x0
- MX27_PAD_SD2_D0__SD2_D0 0x0
- MX27_PAD_SD2_D1__SD2_D1 0x0
- MX27_PAD_SD2_D2__SD2_D2 0x0
- MX27_PAD_SD2_D3__SD2_D3 0x0
- MX27_PAD_SSI3_FS__GPIO3_28 0x0 /* WP */
- MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
- >;
- };
+ pinctrl_sdhc2: sdhc2grp {
+ fsl,pins = <
+ MX27_PAD_SD2_CLK__SD2_CLK 0x0
+ MX27_PAD_SD2_CMD__SD2_CMD 0x0
+ MX27_PAD_SD2_D0__SD2_D0 0x0
+ MX27_PAD_SD2_D1__SD2_D1 0x0
+ MX27_PAD_SD2_D2__SD2_D2 0x0
+ MX27_PAD_SD2_D3__SD2_D3 0x0
+ MX27_PAD_SSI3_FS__GPIO3_28 0x0 /* WP */
+ MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX27_PAD_UART1_TXD__UART1_TXD 0x0
- MX27_PAD_UART1_RXD__UART1_RXD 0x0
- MX27_PAD_UART1_CTS__UART1_CTS 0x0
- MX27_PAD_UART1_RTS__UART1_RTS 0x0
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX27_PAD_UART1_TXD__UART1_TXD 0x0
+ MX27_PAD_UART1_RXD__UART1_RXD 0x0
+ MX27_PAD_UART1_CTS__UART1_CTS 0x0
+ MX27_PAD_UART1_RTS__UART1_RTS 0x0
+ >;
+ };
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX27_PAD_UART2_TXD__UART2_TXD 0x0
- MX27_PAD_UART2_RXD__UART2_RXD 0x0
- MX27_PAD_UART2_CTS__UART2_CTS 0x0
- MX27_PAD_UART2_RTS__UART2_RTS 0x0
- >;
- };
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX27_PAD_UART2_TXD__UART2_TXD 0x0
+ MX27_PAD_UART2_RXD__UART2_RXD 0x0
+ MX27_PAD_UART2_CTS__UART2_CTS 0x0
+ MX27_PAD_UART2_RTS__UART2_RTS 0x0
+ >;
+ };
- pinctrl_usbh2: usbh2grp {
- fsl,pins = <
- MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
- MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
- MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
- MX27_PAD_USBH2_STP__USBH2_STP 0x0
- MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
- MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
- MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
- MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
- MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
- MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
- MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
- MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
- >;
- };
+ pinctrl_usbh2: usbh2grp {
+ fsl,pins = <
+ MX27_PAD_USBH2_CLK__USBH2_CLK 0x0
+ MX27_PAD_USBH2_DIR__USBH2_DIR 0x0
+ MX27_PAD_USBH2_NXT__USBH2_NXT 0x0
+ MX27_PAD_USBH2_STP__USBH2_STP 0x0
+ MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0
+ MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0
+ MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0
+ MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0
+ MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0
+ MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0
+ MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0
+ MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0
+ >;
+ };
- pinctrl_weim: weimgrp {
- fsl,pins = <
- MX27_PAD_CS4_B__CS4_B 0x0 /* CS4 */
- MX27_PAD_SD1_D1__GPIO5_19 0x0 /* CAN IRQ */
- >;
- };
+ pinctrl_weim: weimgrp {
+ fsl,pins = <
+ MX27_PAD_CS4_B__CS4_B 0x0 /* CS4 */
+ MX27_PAD_SD1_D1__GPIO5_19 0x0 /* CAN IRQ */
+ >;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
index e958d7286ae9d397161b2e7404617bf6f75c0182..7d5d24c781b9834dbf8834c798b923829fd98444 100644
--- a/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx27-phytec-phycore-som.dtsi
@@ -192,90 +192,88 @@ lm75@4a {
};
&iomuxc {
- imx27_phycore_som {
- pinctrl_cspi1: cspi1grp {
- fsl,pins = <
- MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
- MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
- MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
- MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */
- >;
- };
+ pinctrl_cspi1: cspi1grp {
+ fsl,pins = <
+ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
+ MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
+ MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
+ MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */
+ >;
+ };
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- MX27_PAD_SD3_CMD__FEC_TXD0 0x0
- MX27_PAD_SD3_CLK__FEC_TXD1 0x0
- MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
- MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
- MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
- MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
- MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
- MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
- MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
- MX27_PAD_ATA_DATA7__FEC_MDC 0x0
- MX27_PAD_ATA_DATA8__FEC_CRS 0x0
- MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
- MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
- MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
- MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
- MX27_PAD_ATA_DATA13__FEC_COL 0x0
- MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
- MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
- MX27_PAD_SSI3_TXDAT__GPIO3_30 0x0 /* FEC RST */
- >;
- };
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+ MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+ MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+ MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+ MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+ MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+ MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+ MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+ MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+ MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+ MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+ MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+ MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+ MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+ MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+ MX27_PAD_ATA_DATA13__FEC_COL 0x0
+ MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+ MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+ MX27_PAD_SSI3_TXDAT__GPIO3_30 0x0 /* FEC RST */
+ >;
+ };
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
- MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
- >;
- };
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+ MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+ >;
+ };
- pinctrl_nfc: nfcgrp {
- fsl,pins = <
- MX27_PAD_NFRB__NFRB 0x0
- MX27_PAD_NFCLE__NFCLE 0x0
- MX27_PAD_NFWP_B__NFWP_B 0x0
- MX27_PAD_NFCE_B__NFCE_B 0x0
- MX27_PAD_NFALE__NFALE 0x0
- MX27_PAD_NFRE_B__NFRE_B 0x0
- MX27_PAD_NFWE_B__NFWE_B 0x0
- >;
- };
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ MX27_PAD_NFRB__NFRB 0x0
+ MX27_PAD_NFCLE__NFCLE 0x0
+ MX27_PAD_NFWP_B__NFWP_B 0x0
+ MX27_PAD_NFCE_B__NFCE_B 0x0
+ MX27_PAD_NFALE__NFALE 0x0
+ MX27_PAD_NFRE_B__NFRE_B 0x0
+ MX27_PAD_NFWE_B__NFWE_B 0x0
+ >;
+ };
- pinctrl_pmic: pmicgrp {
- fsl,pins = <
- MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
- >;
- };
+ pinctrl_pmic: pmicgrp {
+ fsl,pins = <
+ MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
+ >;
+ };
- pinctrl_ssi1: ssi1grp {
- fsl,pins = <
- MX27_PAD_SSI1_FS__SSI1_FS 0x0
- MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
- MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
- MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
- >;
- };
+ pinctrl_ssi1: ssi1grp {
+ fsl,pins = <
+ MX27_PAD_SSI1_FS__SSI1_FS 0x0
+ MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
+ MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
+ MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
+ >;
+ };
- pinctrl_usbotg: usbotggrp {
- fsl,pins = <
- MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
- MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
- MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
- MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
- MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
- MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
- MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
- MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
- MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
- MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
- MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
- MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
- >;
- };
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
+ MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
+ MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
+ MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
+ MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
+ MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
+ MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
+ MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
+ MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
+ MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
+ MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
+ MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
+ >;
};
};
--
2.43.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/4] dt-bindings: pinctrl: imx35: add compatible string fsl,imx25-iomuxc
2026-02-11 21:00 ` [PATCH 2/4] dt-bindings: pinctrl: imx35: add compatible string fsl,imx25-iomuxc Frank Li
@ 2026-02-12 11:45 ` Krzysztof Kozlowski
2026-02-24 9:02 ` Linus Walleij
1 sibling, 0 replies; 10+ messages in thread
From: Krzysztof Kozlowski @ 2026-02-12 11:45 UTC (permalink / raw)
To: Frank Li
Cc: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sascha Hauer, linux-gpio,
devicetree, imx, linux-arm-kernel, linux-kernel
On Wed, Feb 11, 2026 at 04:00:01PM -0500, Frank Li wrote:
> Add compatible string fsl,imx25-iomuxc.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.yaml | 1 +
> 1 file changed, 1 insertion(+)
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML
2026-02-11 21:00 ` [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML Frank Li
@ 2026-02-18 18:39 ` Rob Herring
2026-02-24 9:02 ` Linus Walleij
1 sibling, 0 replies; 10+ messages in thread
From: Rob Herring @ 2026-02-18 18:39 UTC (permalink / raw)
To: Frank Li
Cc: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Linus Walleij, Krzysztof Kozlowski,
Conor Dooley, Sascha Hauer, linux-gpio, devicetree, imx,
linux-arm-kernel, linux-kernel
On Wed, Feb 11, 2026 at 04:00:00PM -0500, Frank Li wrote:
> Convert fsl,imx27-pinctrl.txt to YAML format.
>
> Additional changes:
> - Add the compatible string "fsl,imx1-iomuxc".
> - Add gpio@... child nodes.
> - Add ranges property.
> - Remove the redundant intermediate node between pinmux and group nodes.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> .../bindings/pinctrl/fsl,imx27-iomuxc.yaml | 126 +++++++++++++++++++++
> .../bindings/pinctrl/fsl,imx27-pinctrl.txt | 121 --------------------
> 2 files changed, 126 insertions(+), 121 deletions(-)
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML
2026-02-11 21:00 ` [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML Frank Li
2026-02-18 18:39 ` Rob Herring
@ 2026-02-24 9:02 ` Linus Walleij
1 sibling, 0 replies; 10+ messages in thread
From: Linus Walleij @ 2026-02-24 9:02 UTC (permalink / raw)
To: Frank Li
Cc: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Sascha Hauer, linux-gpio, devicetree, imx,
linux-arm-kernel, linux-kernel
On Wed, Feb 11, 2026 at 10:00 PM Frank Li <Frank.Li@nxp.com> wrote:
> Convert fsl,imx27-pinctrl.txt to YAML format.
>
> Additional changes:
> - Add the compatible string "fsl,imx1-iomuxc".
> - Add gpio@... child nodes.
> - Add ranges property.
> - Remove the redundant intermediate node between pinmux and group nodes.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
This patch (1/4) applied to the pinctrl tree.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/4] dt-bindings: pinctrl: imx35: add compatible string fsl,imx25-iomuxc
2026-02-11 21:00 ` [PATCH 2/4] dt-bindings: pinctrl: imx35: add compatible string fsl,imx25-iomuxc Frank Li
2026-02-12 11:45 ` Krzysztof Kozlowski
@ 2026-02-24 9:02 ` Linus Walleij
1 sibling, 0 replies; 10+ messages in thread
From: Linus Walleij @ 2026-02-24 9:02 UTC (permalink / raw)
To: Frank Li
Cc: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, Sascha Hauer, linux-gpio, devicetree, imx,
linux-arm-kernel, linux-kernel
On Wed, Feb 11, 2026 at 10:00 PM Frank Li <Frank.Li@nxp.com> wrote:
> Add compatible string fsl,imx25-iomuxc.
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
This patch (2/4) applied to the pinctrl tree.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: (subset) [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27
2026-02-11 20:59 [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27 Frank Li
` (3 preceding siblings ...)
2026-02-11 21:00 ` [PATCH 4/4] ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy Frank Li
@ 2026-03-02 16:44 ` Frank Li
4 siblings, 0 replies; 10+ messages in thread
From: Frank Li @ 2026-03-02 16:44 UTC (permalink / raw)
To: Dong Aisheng, Fabio Estevam, Jacky Bai, Pengutronix Kernel Team,
NXP S32 Linux Team, Linus Walleij, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, Sascha Hauer, Frank Li
Cc: linux-gpio, devicetree, imx, linux-arm-kernel, linux-kernel
On Wed, 11 Feb 2026 15:59:59 -0500, Frank Li wrote:
> Cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27.
> 1. convert txt to yaml format.
> 2. rename node name to pinmux.
> 3. remove redundant intermediate node in pinmux hierarchy at dts.
>
>
Applied, thanks!
[3/4] ARM: dts: imx: rename iomuxc to pinmux
(no commit info)
[4/4] ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy
(no commit info)
Best regards,
--
Frank Li <Frank.Li@nxp.com>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2026-03-02 16:44 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-02-11 20:59 [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27 Frank Li
2026-02-11 21:00 ` [PATCH 1/4] dt-bindings: pinctrl: convert fsl,imx27-pinctrl.txt to YAML Frank Li
2026-02-18 18:39 ` Rob Herring
2026-02-24 9:02 ` Linus Walleij
2026-02-11 21:00 ` [PATCH 2/4] dt-bindings: pinctrl: imx35: add compatible string fsl,imx25-iomuxc Frank Li
2026-02-12 11:45 ` Krzysztof Kozlowski
2026-02-24 9:02 ` Linus Walleij
2026-02-11 21:00 ` [PATCH 3/4] ARM: dts: imx: rename iomuxc to pinmux Frank Li
2026-02-11 21:00 ` [PATCH 4/4] ARM: dts: imx: remove redundant intermediate node in pinmux hierarchy Frank Li
2026-03-02 16:44 ` (subset) [PATCH 0/4] ARM: dts: imx: cleanup iomux related CHECK_DTBS warnings for imx1, imx25 and imx27 Frank Li
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox