[PATCH v6 0/8] Initial support for Samsung Galaxy Tab 2 series

[Mithil Bavishi <bavishimithil@gmail.com>]

This series adds initial support for the Samsung Galaxy Tab 2
(samsung-espresso7/10) series of devices. It adds support for 6 variants
(P3100, P3110, P3113, P5100, P5110, P5113). Downstream categorised them
based on 3G and WiFi, but since they use different panel, touch
controllers, batteries, I decided to categorise them based on screen
size as espresso7 and espresso10.

It adds basic functionality for both the models including panel, drm,
sdcard, touchscreen, mmc, wifi, bluetooth, keys, battery, fuel gauge,
pmic, sensors.

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
Changes in v6
- Remove references to WAKEUP_EN (drivers dont support interrupts-extended)
- Remove gp2a_irq, it was for bh1721fvc not gp2a
- Remove mount-matrix
- Link to v5: https://lore.kernel.org/linux-omap/20260129054709.3878-1-bavishimithil@gmail.com/
Changes in v5
- Commit message length < 75
- Squash commits
- Link to v4: https://lore.kernel.org/linux-omap/20260119033035.57538-1-bavishimithil@gmail.com/
Changes in v4
- Fixed syntax in doestek vendor
- Changed - to _ in node names
- Removed address/size-cells in chosen
- Added pinmux for i2c-gpio5,6,7, irled
- Allow sdcard to poweroff (reg_espresso_external)
- Changed power to key-power
- Order alphabetically in omap4_pmx_wkup and omap4_pmx_core
- Use generic node names
- Added TODO for future nodes
- Fix touchscreen values in espresso7 and espresso10
- Add dts to Makefile
- Commit message length under 75
- Link to v3: https://lore.kernel.org/linux-omap/20241108200440.7562-1-bavishimithil@gmail.com/
Changes in v3
- Use device tree from the correct branch
- Fix commit subjects to matching the subsystem
- Add Doestek vendor
- Add compatible for LVDS encoder
- Add compatibles for 7 and 10 inch panels
- Clean up device tree using "make CHECK_DTBS=y"
- Link to v2: https://lore.kernel.org/all/20241030211215.347710-1-bavishimithil@gmail.com/
Changes in v2
- Fix node names in common dtsi to have - instead of _
- Removed import for twl6030.dtsi
- Edited dts to completely use twl6032 nodes
- Fixed typo ldosb -> ldousb
- Link to v1: https://lore.kernel.org/all/20241030194136.297648-1-bavishimithil@gmail.com/
--

Mithil Bavishi (8):
  ARM: dts: twl6032: Add DTS file for TWL6032 PMIC
  dt-bindings: vendor-prefixes: Add Doestek
  dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am
  dt-bindings: display: panel-lvds: Add compatibles for Samsung
    LTN070NL01 and LTN101AL03 panels
  ARM: dts: ti: omap: espresso-common: Add common device tree for
    Samsung Galaxy Tab 2 series
  dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0 and 10.1
  ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy
    Tab 2 7.0
  ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy
    Tab 2 10.1

 .../devicetree/bindings/arm/ti/omap.yaml      |   2 +
 .../bindings/display/bridge/lvds-codec.yaml   |   1 +
 .../bindings/display/panel/panel-lvds.yaml    |   4 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/ti/omap/Makefile            |   2 +
 .../omap/omap4-samsung-espresso-common.dtsi   | 753 ++++++++++++++++++
 .../dts/ti/omap/omap4-samsung-espresso10.dts  | 104 +++
 .../dts/ti/omap/omap4-samsung-espresso7.dts   |  70 ++
 arch/arm/boot/dts/ti/omap/twl6032.dtsi        |  77 ++
 9 files changed, 1015 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
 create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi

-- 
2.43.0