From: luka.gejak@linux.dev
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dan Carpenter <dan.carpenter@linaro.org>,
linux-staging@lists.linux.dev, linux-kernel@vger.kernel.org,
Luka Gejak <luka.gejak@linux.dev>
Subject: [PATCH 12/21] staging: rtl8723bs: hal: fix line lengths in rtl8723b_hal_init.c
Date: Tue, 24 Feb 2026 14:27:39 +0100 [thread overview]
Message-ID: <20260224132748.12336-13-luka.gejak@linux.dev> (raw)
In-Reply-To: <20260224132748.12336-1-luka.gejak@linux.dev>
From: Luka Gejak <luka.gejak@linux.dev>
Break long lines exceeding 100 characters to comply with kernel coding
style.
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
---
.../staging/rtl8723bs/hal/rtl8723b_hal_init.c | 64 ++++++++++++-------
1 file changed, 41 insertions(+), 23 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
index 54dbcea89491..8505909725bc 100644
--- a/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
+++ b/drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c
@@ -58,7 +58,10 @@ static int _BlockWrite(struct adapter *padapter, void *buffer, u32 buffSize)
remainSize_p1 = buffSize % blockSize_p1;
for (i = 0; i < blockCount_p1; i++) {
- ret = rtw_write32(padapter, (FW_8723B_START_ADDRESS + i * blockSize_p1), *((u32 *)(bufferPtr + i * blockSize_p1)));
+ u32 addr = FW_8723B_START_ADDRESS + i * blockSize_p1;
+ u32 data = *((u32 *)(bufferPtr + i * blockSize_p1));
+
+ ret = rtw_write32(padapter, addr, data);
if (ret == _FAIL) {
netdev_dbg(padapter->pnetdev, "write failed at %s %d, block:%d\n",
__func__, __LINE__, i);
@@ -261,27 +264,34 @@ void rtl8723b_FirmwareSelfReset(struct adapter *padapter)
struct hal_com_data *pHalData = GET_HAL_DATA(padapter);
u8 val;
u8 Delay = 100;
+ bool old_fw;
- if (
- !(IS_FW_81xxC(padapter) && ((pHalData->FirmwareVersion < 0x21) || (pHalData->FirmwareVersion == 0x21 && pHalData->FirmwareSubVersion < 0x01)))
- ) { /* after 88C Fw v33.1 */
- /* 0x1cf = 0x20. Inform 8051 to reset. 2009.12.25. tynli_test */
- rtw_write8(padapter, REG_HMETFR+3, 0x20);
+ /* Check for old firmware version */
+ old_fw = IS_FW_81xxC(padapter) &&
+ ((pHalData->FirmwareVersion < 0x21) ||
+ (pHalData->FirmwareVersion == 0x21 &&
+ pHalData->FirmwareSubVersion < 0x01));
+
+ if (old_fw)
+ return;
+ /* after 88C Fw v33.1 */
+ /* 0x1cf = 0x20. Inform 8051 to reset. 2009.12.25. tynli_test */
+ rtw_write8(padapter, REG_HMETFR + 3, 0x20);
+
+ val = rtw_read8(padapter, REG_SYS_FUNC_EN + 1);
+ while (val & BIT2) {
+ Delay--;
+ if (Delay == 0)
+ break;
+ udelay(50);
val = rtw_read8(padapter, REG_SYS_FUNC_EN + 1);
- while (val & BIT2) {
- Delay--;
- if (Delay == 0)
- break;
- udelay(50);
- val = rtw_read8(padapter, REG_SYS_FUNC_EN + 1);
- }
+ }
- if (Delay == 0) {
- /* force firmware reset */
- val = rtw_read8(padapter, REG_SYS_FUNC_EN + 1);
- rtw_write8(padapter, REG_SYS_FUNC_EN + 1, val & (~BIT2));
- }
+ if (Delay == 0) {
+ /* force firmware reset */
+ val = rtw_read8(padapter, REG_SYS_FUNC_EN + 1);
+ rtw_write8(padapter, REG_SYS_FUNC_EN + 1, val & (~BIT2));
}
}
@@ -998,9 +1008,13 @@ void rtl8723b_SetBeaconRelatedRegisters(struct adapter *padapter)
rtw_write32(padapter, REG_TCR, value32);
/* NOTE: Fix test chip's bug (about contention windows's randomness) */
- if (check_fwstate(&padapter->mlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE|WIFI_AP_STATE) == true) {
- rtw_write8(padapter, REG_RXTSF_OFFSET_CCK, 0x50);
- rtw_write8(padapter, REG_RXTSF_OFFSET_OFDM, 0x50);
+ {
+ u16 state_mask = WIFI_ADHOC_STATE | WIFI_ADHOC_MASTER_STATE | WIFI_AP_STATE;
+
+ if (check_fwstate(&padapter->mlmepriv, state_mask)) {
+ rtw_write8(padapter, REG_RXTSF_OFFSET_CCK, 0x50);
+ rtw_write8(padapter, REG_RXTSF_OFFSET_OFDM, 0x50);
+ }
}
_BeaconFunctionEnable(padapter, true, true);
@@ -1653,7 +1667,9 @@ static u8 fill_txdesc_sectype(struct pkt_attrib *pattrib)
return sectype;
}
-static void fill_txdesc_vcs_8723b(struct adapter *padapter, struct pkt_attrib *pattrib, struct txdesc_8723b *ptxdesc)
+static void fill_txdesc_vcs_8723b(struct adapter *padapter,
+ struct pkt_attrib *pattrib,
+ struct txdesc_8723b *ptxdesc)
{
if (pattrib->vcs_mode) {
switch (pattrib->vcs_mode) {
@@ -1684,7 +1700,9 @@ static void fill_txdesc_vcs_8723b(struct adapter *padapter, struct pkt_attrib *p
}
}
-static void fill_txdesc_phy_8723b(struct adapter *padapter, struct pkt_attrib *pattrib, struct txdesc_8723b *ptxdesc)
+static void fill_txdesc_phy_8723b(struct adapter *padapter,
+ struct pkt_attrib *pattrib,
+ struct txdesc_8723b *ptxdesc)
{
if (pattrib->ht_en) {
ptxdesc->data_bw = BWMapping_8723B(padapter, pattrib);
--
2.53.0
next prev parent reply other threads:[~2026-02-24 13:28 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-24 13:27 [PATCH 00/21] staging: rtl8723bs: various cleanups luka.gejak
2026-02-24 13:27 ` [PATCH 01/21] staging: rtl8723bs: remove unused rtl8192c function declarations luka.gejak
2026-02-24 13:27 ` [PATCH 02/21] staging: rtl8723bs: remove unused RECV_BLK defines luka.gejak
2026-02-24 13:27 ` [PATCH 03/21] staging: rtl8723bs: remove unused MAX_PATH_NUM defines luka.gejak
2026-02-24 13:27 ` [PATCH 04/21] staging: rtl8723bs: convert PSTA_INFO_T to struct sta_info * luka.gejak
2026-02-24 13:27 ` [PATCH 05/21] staging: rtl8723bs: remove NDIS type aliases luka.gejak
2026-02-24 13:27 ` [PATCH 06/21] staging: rtl8723bs: remove redundant MAC_ARG macro luka.gejak
2026-02-24 13:27 ` [PATCH 07/21] staging: rtl8723bs: core: fix line lengths in rtw_wlan_util.c luka.gejak
2026-02-25 6:53 ` Dan Carpenter
2026-02-24 13:27 ` [PATCH 08/21] staging: rtl8723bs: core: fix line lengths in rtw_recv.c luka.gejak
2026-02-25 6:53 ` Dan Carpenter
2026-02-24 13:27 ` [PATCH 09/21] staging: rtl8723bs: hal: fix line lengths in HalPhyRf_8723B.c luka.gejak
2026-02-25 6:57 ` Dan Carpenter
2026-02-24 13:27 ` [PATCH 10/21] staging: rtl8723bs: os_dep: fix line lengths in ioctl_cfg80211.c luka.gejak
2026-02-25 6:58 ` Dan Carpenter
2026-02-25 14:56 ` Greg Kroah-Hartman
2026-02-25 15:08 ` Luka Gejak
2026-02-25 15:14 ` Greg Kroah-Hartman
2026-02-25 15:17 ` Luka Gejak
2026-02-25 15:48 ` Greg Kroah-Hartman
2026-02-24 13:27 ` [PATCH 11/21] staging: rtl8723bs: hal: fix line lengths in rtl8723b_cmd.c luka.gejak
2026-02-25 6:58 ` Dan Carpenter
2026-02-24 13:27 ` luka.gejak [this message]
2026-02-25 7:00 ` [PATCH 12/21] staging: rtl8723bs: hal: fix line lengths in rtl8723b_hal_init.c Dan Carpenter
2026-02-25 9:19 ` Luka Gejak
2026-02-24 13:27 ` [PATCH 13/21] staging: rtl8723bs: hal: fix line lengths in rtl8723b_phycfg.c luka.gejak
2026-02-24 13:27 ` [PATCH 14/21] staging: rtl8723bs: core: fix various line length overflows luka.gejak
2026-02-24 13:27 ` [PATCH 15/21] staging: rtl8723bs: hal: " luka.gejak
2026-02-24 13:27 ` [PATCH 16/21] staging: rtl8723bs: os_dep: " luka.gejak
2026-02-24 13:27 ` [PATCH 17/21] staging: rtl8723bs: core: fix line lengths in rtw_cmd.c luka.gejak
2026-02-24 13:27 ` [PATCH 18/21] staging: rtl8723bs: core: fix line lengths in rtw_mlme_ext.c luka.gejak
2026-02-24 13:27 ` [PATCH 19/21] staging: rtl8723bs: core: fix line lengths in rtw_mlme.c luka.gejak
2026-02-24 13:27 ` [PATCH 20/21] staging: rtl8723bs: core: fix line lengths in rtw_xmit.c luka.gejak
2026-02-24 13:27 ` [PATCH 21/21] staging: rtl8723bs: core: fix various line length overflows luka.gejak
2026-02-24 18:15 ` [PATCH 00/21] staging: rtl8723bs: various cleanups Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260224132748.12336-13-luka.gejak@linux.dev \
--to=luka.gejak@linux.dev \
--cc=dan.carpenter@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-staging@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox