[PATCH v9 0/8] Initial support for Samsung Galaxy Tab 2 series

[PATCH v9 0/8] Initial support for Samsung Galaxy Tab 2 series

[Mithil Bavishi]

This series adds initial support for the Samsung Galaxy Tab 2
(samsung-espresso7/10) series of devices. It adds support for 6 variants
(P3100, P3110, P3113, P5100, P5110, P5113). Downstream categorised them
based on 3G and WiFi, but since they use different panel, touch
controllers, batteries, I decided to categorise them based on screen
size as espresso7 and espresso10.

It adds basic functionality for both the models including panel, drm,
sdcard, touchscreen, mmc, wifi, bluetooth, keys, battery, fuel gauge,
pmic, sensors.

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
Changes in v9
- Removed stray |
- Rebased on latest commit
- Removed duplicate touchscreen parameters
- Link to v8: https://lore.kernel.org/linux-omap/20260223134941.427-1-bavishimithil@gmail.com/
Changes in v8
- Remove WAKEUP_EN from omap4_pmx_wkup
- Link to v7: https://lore.kernel.org/linux-omap/20260223055113.1288-1-bavishimithil@gmail.com/ 
Changes in v7
- Removed prox_irq
- Changed commit message
- Link to v6: https://lore.kernel.org/linux-omap/20260219210408.5451-1-bavishimithil@gmail.com/
Changes in v6
- Remove references to WAKEUP_EN (drivers dont support interrupts-extended)
- Remove gp2a_irq, it was for bh1721fvc not gp2a
- Remove mount-matrix
- Link to v5: https://lore.kernel.org/linux-omap/20260129054709.3878-1-bavishimithil@gmail.com/
Changes in v5
- Commit message length < 75
- Squash commits
- Link to v4: https://lore.kernel.org/linux-omap/20260119033035.57538-1-bavishimithil@gmail.com/
Changes in v4
- Fixed syntax in doestek vendor
- Changed - to _ in node names
- Removed address/size-cells in chosen
- Added pinmux for i2c-gpio5,6,7, irled
- Allow sdcard to poweroff (reg_espresso_external)
- Changed power to key-power
- Order alphabetically in omap4_pmx_wkup and omap4_pmx_core
- Use generic node names
- Added TODO for future nodes
- Fix touchscreen values in espresso7 and espresso10
- Add dts to Makefile
- Commit message length under 75
- Link to v3: https://lore.kernel.org/linux-omap/20241108200440.7562-1-bavishimithil@gmail.com/
Changes in v3
- Use device tree from the correct branch
- Fix commit subjects to matching the subsystem
- Add Doestek vendor
- Add compatible for LVDS encoder
- Add compatibles for 7 and 10 inch panels
- Clean up device tree using "make CHECK_DTBS=y"
- Link to v2: https://lore.kernel.org/all/20241030211215.347710-1-bavishimithil@gmail.com/
Changes in v2
- Fix node names in common dtsi to have - instead of _
- Removed import for twl6030.dtsi
- Edited dts to completely use twl6032 nodes
- Fixed typo ldosb -> ldousb
- Link to v1: https://lore.kernel.org/all/20241030194136.297648-1-bavishimithil@gmail.com/
--

Mithil Bavishi (8):
  ARM: dts: twl6032: Add DTS file for TWL6032 PMIC
  dt-bindings: vendor-prefixes: Add Doestek
  dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am
  dt-bindings: display: panel-lvds: Add compatibles for Samsung
    LTN070NL01 and LTN101AL03 panels
  ARM: dts: ti: omap: espresso-common: Add common device tree for
    Samsung Galaxy Tab 2 series
  dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0 and 10.1
  ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy
    Tab 2 7.0
  ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy
    Tab 2 10.1

 .../devicetree/bindings/arm/ti/omap.yaml      |   2 +
 .../bindings/display/bridge/lvds-codec.yaml   |   1 +
 .../bindings/display/panel/panel-lvds.yaml    |   4 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/ti/omap/Makefile            |   2 +
 .../omap/omap4-samsung-espresso-common.dtsi   | 744 ++++++++++++++++++
 .../dts/ti/omap/omap4-samsung-espresso10.dts  | 101 +++
 .../dts/ti/omap/omap4-samsung-espresso7.dts   |  70 ++
 arch/arm/boot/dts/ti/omap/twl6032.dtsi        |  77 ++
 9 files changed, 1003 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
 create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi

-- 
2.43.0

[PATCH v9 1/8] ARM: dts: twl6032: Add DTS file for TWL6032 PMIC

[Mithil Bavishi]

Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
has driver support with TWL6030 (Phoenix) since both of them are so
similar, some nodes can be reused from TWL6030 as well

This can be included in the board files like twl6030
Example:
...
&i2c1 {
    twl: twl@48 {
        reg = <0x48>;
        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
        interrupt-controller;
        interrupt-parent = <&gic>;
    };
};

/include/ "twl6032.dtsi"
...

Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 arch/arm/boot/dts/ti/omap/twl6032.dtsi | 77 ++++++++++++++++++++++++++
 1 file changed, 77 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/twl6032.dtsi

diff --git a/arch/arm/boot/dts/ti/omap/twl6032.dtsi b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
new file mode 100644
index 000000000..d599a2ca6
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/twl6032.dtsi
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/twl6032.pdf
+ */
+
+&twl {
+	compatible = "ti,twl6032";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	rtc {
+		compatible = "ti,twl4030-rtc";
+		interrupts = <11>;
+	};
+
+	vio: regulator-vio {
+		compatible = "ti,twl6032-vio";
+	};
+
+	ldo1: regulator-ldo1 {
+		compatible = "ti,twl6032-ldo1";
+	};
+
+	ldo2: regulator-ldo2 {
+		compatible = "ti,twl6032-ldo2";
+	};
+
+	ldo3: regulator-ldo3 {
+		compatible = "ti,twl6032-ldo3";
+	};
+
+	ldo4: regulator-ldo4 {
+		compatible = "ti,twl6032-ldo4";
+	};
+
+	ldo5: regulator-ldo5 {
+		compatible = "ti,twl6032-ldo5";
+	};
+
+	ldo6: regulator-ldo6 {
+		compatible = "ti,twl6032-ldo6";
+	};
+
+	ldoln: regulator-ldoln {
+		compatible = "ti,twl6032-ldoln";
+	};
+
+	ldousb: regulator-ldousb {
+		compatible = "ti,twl6032-ldousb";
+	};
+
+	smps4: regulator-smps4 {
+		compatible = "ti,twl6032-smps4";
+	};
+
+	gpadc: gpadc {
+		compatible = "ti,twl6032-gpadc";
+		interrupts = <3>;
+		#io-channel-cells = <1>;
+	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
+
+	twl_pwm: pwm {
+		compatible = "ti,twl6030-pwm";
+		#pwm-cells = <2>;
+	};
+
+	twl_pwmled: pwmled {
+		compatible = "ti,twl6030-pwmled";
+		#pwm-cells = <2>;
+	};
+};
-- 
2.43.0

[PATCH v9 2/8] dt-bindings: vendor-prefixes: Add Doestek

[Mithil Bavishi]

Add vendor prefix for Doestek Co., Ltd.
Link: http://www.doestek.co.kr/

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index ee7fd3cfe..5cc05d518 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -441,6 +441,8 @@ patternProperties:
     description: D-Link Corporation
   "^dmo,.*":
     description: Data Modul AG
+  "^doestek,.*":
+    description: Doestek Co., Ltd.
   "^domintech,.*":
     description: Domintech Co., Ltd.
   "^dongwoon,.*":
-- 
2.43.0

[PATCH v9 3/8] dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am

[Mithil Bavishi]

Add compatible strings for the Doestek DTC34LM85AM Flat Panel Display
Transmitter

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 4f52e35d0..7586d681b 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -33,6 +33,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - doestek,dtc34lm85am # For the Doestek DTC34LM85AM Flat Panel Display (FPD) Transmitter
               - onnn,fin3385  # OnSemi FIN3385
               - ti,ds90c185   # For the TI DS90C185 FPD-Link Serializer
               - ti,ds90c187   # For the TI DS90C187 FPD-Link Serializer
-- 
2.43.0

[PATCH v9 4/8] dt-bindings: display: panel-lvds: Add compatibles for Samsung LTN070NL01 and LTN101AL03 panels

[Mithil Bavishi]

The LTN070NL01 is a 7.0 inch 1024x600, 24 bit, VESA Compatible, TFT
display panel
The LTN101AL03 is a 10.1 inch 800x1280, 24 bit, VESA Compatible, TFT
display panel

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/display/panel/panel-lvds.yaml         | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
index dbc01e640..b31c67bab 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml
@@ -58,6 +58,10 @@ properties:
           - hydis,hv070wx2-1e0
           # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel
           - jenson,bl-jt60050-01a
+          # Samsung LTN070NL01 7.0" WSVGA (1024x600) TFT LCD LVDS panel
+          - samsung,ltn070nl01
+          # Samsung LTN101AL03 10.1" WXGA (800x1280) TFT LCD LVDS panel
+          - samsung,ltn101al03
           - tbs,a711-panel
           # Winstar WF70A8SYJHLNGA 7" WSVGA (1024x600) color TFT LCD LVDS panel
           - winstar,wf70a8syjhlnga
-- 
2.43.0

[PATCH v9 5/8] ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series

[Mithil Bavishi]

Create common device tree for Samsung Espresso series devices

Create a shared device tree for all variants first.
Device-specific trees will be added later based on screen size.

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 .../omap/omap4-samsung-espresso-common.dtsi   | 744 ++++++++++++++++++
 1 file changed, 744 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi

diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
new file mode 100644
index 000000000..06651072f
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso-common.dtsi
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+#include "dt-bindings/gpio/gpio.h"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "omap443x.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>; /* 1 GB */
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		continuous_splash: framebuffer@bef00000{
+			reg = <0xbef00000 (1024 * 600 * 4)>;
+			no-map;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		#address-cells = <1>;
+	};
+
+	i2c-gpio5 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c5_pins>;
+		sda-gpios = <&gpio4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* TODO: SMB136 Charger for 7" variant at 0x4d */
+	};
+
+	i2c-gpio6 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_pins>;
+		sda-gpios = <&gpio3 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <10>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* TODO: STMPE811 ADC at 0x41 */
+	};
+
+	i2c-gpio7 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c7_pins>;
+		sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17042";
+			reg = <0x36>;
+			pinctrl-0 = <&fuel_alert_irq>;
+			pinctrl-names = "default";
+			interrupt-parent = <&gpio2>;
+			interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+			maxim,rsns-microohm = <10000>;
+			maxim,over-heat-temp = <500>;
+			maxim,dead-volt = <2500>;
+			maxim,over-volt = <4300>;
+		};
+	};
+
+	reg_espresso_wlan: regulator-espresso-wlan {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlanen_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "espresso_wlan";
+		regulator-max-microvolt = <2000000>;
+		regulator-min-microvolt = <2000000>;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO_104 */
+		startup-delay-us = <70000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	wlan_pwrseq: wlan-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&twl 0>;
+		clock-names = "ext_clock";
+	};
+
+	reg_espresso_internal: regulator-espresso-internal {
+		compatible = "regulator-fixed";
+		regulator-name = "eMMC_LDO";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; /* GPIO_63 */
+		startup-delay-us = <100000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	reg_espresso_external: regulator-espresso-external {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc1";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; /* GPIO_34 */
+		enable-active-high;
+	};
+
+	reg_touch_ldo_en: regulator-touch-ldo-en  {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_ldo_en";
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* GPIO_54 */
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-power {
+			label = "power";
+
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; /* GPIO_wk3 */
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		button-volup {
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume_up"; /* GPIO_wk30 */
+			gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+		};
+
+		button-voldown {
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume_down"; /* GPIO_wk8 */
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_lcd: regulator-lcd	{
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_en";
+		gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>; /* GPIO_135 */
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	pwm10: pwm-10 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm10_default>;
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer10>;
+		ti,clock-source = <0x00>;
+	};
+
+	lvds-encoder {
+		compatible = "doestek,dtc34lm85am", "lvds-encoder";
+		powerdown-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; /* GPIO_136 */
+		power-supply = <&reg_lcd>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				bridge_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	vibrator {
+		compatible = "gpio-vibrator";
+		enable-gpios = <&gpio2 6 GPIO_ACTIVE_HIGH>; /* GPIO_38 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&vibrator_default>;
+	};
+
+	gp2a_shunt: current-sense-shunt {
+		compatible = "current-sense-shunt";
+		io-channels = <&gpadc 4>;
+		shunt-resistor-micro-ohms = <24000000>; /* 24 ohms */
+		#io-channel-cells = <0>;
+	};
+
+	led-ir {
+		compatible = "gpio-ir-tx";
+		gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* GPIO_59 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&ledir_pins>;
+	};
+};
+
+&omap4_pmx_wkup {
+	gpio_keys: gpio-keys-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x046, PIN_INPUT | MUX_MODE3)
+			/* sim_cd.gpio_wk3 - EXT_WAKEUP */
+			OMAP4_IOPAD(0x056, PIN_INPUT | MUX_MODE3)
+			/* fref_clk3_req.gpio_wk30 - VOL_UP */
+			OMAP4_IOPAD(0x05C, PIN_INPUT | MUX_MODE3)
+			/* fref_clk4_out.gpio_wk8 - VOL_DN */
+		>;
+	};
+};
+
+&omap4_pmx_core {
+	backlight_pins: pinmux-backlight-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0X0D8, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE3)
+			/* usbb1_ulpitll_dat7.gpio_95 - LED_BACKLIGHT_RESET */
+		>;
+	};
+
+	bluetooth_pins: pinmux-bluetooth-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+			/* gpmc_ncs6.gpio_103 - BT_EN */
+			OMAP4_IOPAD(0x0be, PIN_OUTPUT | MUX_MODE3)
+			/* cam_strobe.gpio_82 - BT_nRST */
+			OMAP4_IOPAD(0x0c0, PIN_INPUT | MUX_MODE3)
+			/* cam_globalreset.gpio_83 - BT_HOST_WAKE */
+			OMAP4_IOPAD(0x0d4, PIN_OUTPUT | MUX_MODE3)
+			/* usbb1_ulpitll_dat5.gpio_93 - BT_WAKE */
+		>;
+	};
+
+	dss_dpi_pins: pinmux-dss-dpi-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x162, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data23 */
+			OMAP4_IOPAD(0x164, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data22 */
+			OMAP4_IOPAD(0x166, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data21 */
+			OMAP4_IOPAD(0x168, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data20 */
+			OMAP4_IOPAD(0x16a, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data19 */
+			OMAP4_IOPAD(0x16c, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data18 */
+			OMAP4_IOPAD(0x16e, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data15 */
+			OMAP4_IOPAD(0x170, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data14 */
+			OMAP4_IOPAD(0x172, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data13 */
+			OMAP4_IOPAD(0x174, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data12 */
+			OMAP4_IOPAD(0x176, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data11 */
+			OMAP4_IOPAD(0x1b4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data10 */
+			OMAP4_IOPAD(0x1b6, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data9 */
+			OMAP4_IOPAD(0x1b8, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data16 */
+			OMAP4_IOPAD(0x1ba, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data17 */
+			OMAP4_IOPAD(0x1bc, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_hsync */
+			OMAP4_IOPAD(0x1be, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_pclk */
+			OMAP4_IOPAD(0x1c0, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_vsync */
+			OMAP4_IOPAD(0x1c2, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_de */
+			OMAP4_IOPAD(0x1c4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data8 */
+			OMAP4_IOPAD(0x1c6, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data7 */
+			OMAP4_IOPAD(0x1c8, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data6 */
+			OMAP4_IOPAD(0x1ca, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data5 */
+			OMAP4_IOPAD(0x1cc, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data4 */
+			OMAP4_IOPAD(0x1ce, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data3 */
+
+			OMAP4_IOPAD(0x1d0, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data2 */
+			OMAP4_IOPAD(0x1d2, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data1 */
+			OMAP4_IOPAD(0x1d4, PIN_OFF_OUTPUT_LOW | MUX_MODE5)
+			/* dispc2_data0 */
+		>;
+	};
+
+	fuel_alert_irq: pinmux-fuel-alert-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE3)
+			/* gpmc_a20.gpio_44 */
+		>;
+	};
+
+	i2c1_pins: pinmux-i2c1-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x122, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c1_scl */
+			OMAP4_IOPAD(0x124, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux-i2c2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x126, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c2_scl */
+			OMAP4_IOPAD(0x128, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux-i2c3-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12a, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c3_scl */
+			OMAP4_IOPAD(0x12c, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c3_sda */
+		>;
+	};
+
+	i2c4_pins: pinmux-i2c4-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x12e, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c4_scl */
+			OMAP4_IOPAD(0x130, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* i2c4_sda */
+		>;
+	};
+
+	i2c5_pins: pinmux-i2c5-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0de, PIN_INPUT_PULLUP | MUX_MODE3)
+			/* usbc1_icusb_dp.gpio_98 */
+			OMAP4_IOPAD(0x0e0, PIN_INPUT_PULLUP | MUX_MODE3)
+			/* usbc1_icusb_dm.gpio_99 */
+		>;
+	};
+
+	i2c6_pins: pinmux-i2c6-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x09c, PIN_INPUT_PULLUP | MUX_MODE3)
+			/* hdmi_ddc_scl.gpio_65 */
+			OMAP4_IOPAD(0x09e, PIN_INPUT_PULLUP | MUX_MODE3)
+			/* hdmi_ddc_sda.gpio_66 */
+		>;
+	};
+
+	i2c7_pins: pinmux-i2c7-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x08a, PIN_INPUT_PULLUP | MUX_MODE3)
+			/* gpmc_wait0.gpio_61 */
+			OMAP4_IOPAD(0x08c, PIN_INPUT_PULLUP | MUX_MODE3)
+			/* gpmc_wait1.gpio_62 */
+		>;
+	};
+
+	ledir_pins: pimux-ledir-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x086, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* gpmc_nbe0_cle.gpio_59 */
+			OMAP4_IOPAD(0x156, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			/* mcspi4_simo.gpio_152 */
+		>;
+	};
+
+	lvds_pins: pinmux-lvds-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0X136, PIN_OUTPUT | MUX_MODE3)
+			/* mcspi1_simo.gpio_136 - LVDS_nSHDN */
+		>;
+	};
+
+	mmc1_pins: pinmux-mmc1-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0e2, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			/* sdmmc1_clk */
+			OMAP4_IOPAD(0x0e4, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmcc1_cmd */
+			OMAP4_IOPAD(0x0e6, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmcc1_dat0 */
+			OMAP4_IOPAD(0x0e8, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc1_dat1 */
+			OMAP4_IOPAD(0x0ea, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc1_dat2 */
+			OMAP4_IOPAD(0x0ec, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc1_dat3 */
+		>;
+	};
+
+	mmc2_pins: pinmux-mmc2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x040, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_dat0 */
+			OMAP4_IOPAD(0x042, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_dat1 */
+			OMAP4_IOPAD(0x044, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_dat2 */
+			OMAP4_IOPAD(0x046, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_dat3 */
+			OMAP4_IOPAD(0x048, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_dat4 */
+			OMAP4_IOPAD(0x04a, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_dat5 */
+			OMAP4_IOPAD(0x04c, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_dat6 */
+			OMAP4_IOPAD(0x04e, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_dat7 */
+			OMAP4_IOPAD(0x082, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_clk */
+			OMAP4_IOPAD(0x084, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* sdmmc2_cmd */
+		>;
+	};
+
+	mmc5_pins: pinmux-mmc5-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x148, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			/* sdmmc5_clk.sdmmc5_clk */
+			OMAP4_IOPAD(0x14a, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_cmd.sdmmc5_cmd */
+			OMAP4_IOPAD(0x14c, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_dat0.sdmmc5_dat0 */
+			OMAP4_IOPAD(0x14e, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_dat1.sdmmc5_dat1 */
+			OMAP4_IOPAD(0x150, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_dat2.sdmmc5_dat2 */
+			OMAP4_IOPAD(0x152, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* sdmmc5_dat3.sdmmc5_dat3 */
+		>;
+	};
+
+	pwm10_default: pinmux-pwm10-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0X0D6, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE1)
+			/* usbb1_ulpitll_dat6.dmtimer10_pwm_evt - LED_BACKLIGHT_PWM */
+		>;
+	};
+
+	touch_pins: pinmux-touch-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x06c, PIN_INPUT | MUX_MODE3)
+			/* gpmc_a22.gpio_46 - TSP_INT */
+		>;
+	};
+
+	uart2_pins: pinmux-uart2-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x118, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart2_cts.uart2_cts */
+			OMAP4_IOPAD(0x11a, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart2_rts.uart2_rts */
+			OMAP4_IOPAD(0x11c, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart2_rx.uart2_rx */
+			OMAP4_IOPAD(0x11e, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart2_tx.uart2_tx */
+		>;
+	};
+
+	uart3_pins: pinmux-uart3-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x144, PIN_INPUT | MUX_MODE0)
+			/* uart3_rx_irrx */
+			OMAP4_IOPAD(0x146, PIN_OUTPUT | MUX_MODE0)
+			/* uart3_tx_irtx */
+		>;
+	};
+
+	vibrator_default: pinmux-vibrator-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x05c, PIN_INPUT_PULLDOWN | MUX_MODE3)
+			/* gpmc_ad14.gpio_38 - MOTOR_EN */
+		>;
+	};
+
+	wlanen_gpio: pinmux-wlanen-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+			/* gpmc_ncs7.gpio_104 */
+		>;
+	};
+
+	wlan_host_wake: pinmux-wlan-host-wake-pins {
+		pinctrl-single,pins = <
+			OMAP4_IOPAD(0x0bc, PIN_INPUT | MUX_MODE3)
+			/* cam_shutter.gpio_81 - WLAN_HOST_WAKE */
+		>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+
+	interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
+				   &omap4_pmx_core OMAP4_UART3_RX>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	clock-frequency = <400000>;
+
+	twl: pmic@48 {
+		reg = <0x48>;
+		#clock-cells = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <
+			&twl6030_pins
+			&twl6030_wkup_pins
+		>;
+
+		/* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N cascaded to gic */
+		interrupt-parent = <&gic>;
+		system-power-controller;
+	};
+};
+
+#include "twl6032.dtsi"
+#include "twl6030_omap4.dtsi"
+
+&ldo1 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo3 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo4 {
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+	regulator-always-on;
+};
+
+&ldo5 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&ldo6 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&smps4 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&ldousb {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins>;
+
+	accelerometer@18 {
+		compatible = "bosch,bma254";
+		reg = <0x18>;
+		vdd-supply = <&ldo4>;
+		vddio-supply = <&ldo5>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <25 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>,
+			<26 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+	};
+
+	magnetometer@2e {
+		compatible = "yamaha,yas530";
+		reg = <0x2e>;
+		vdd-supply = <&ldo4>;
+		iovdd-supply = <&ldo5>;
+		reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+		interrupts = <&gpio6 10 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	light-sensor@44 {
+		compatible = "sharp,gp2ap002a00f";
+		reg = <0x44>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		vdd-supply = <&ldo4>;
+		vio-supply = <&ldo4>;
+		io-channels = <&gp2a_shunt>;
+		io-channel-names = "alsout";
+		sharp,proximity-far-hysteresis = /bits/ 8 <0x40>;
+		sharp,proximity-close-hysteresis = /bits/ 8 <0x20>;
+	};
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&bridge_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&twl_usb_comparator {
+	usb-supply = <&ldousb>;
+};
+
+&usb_otg_hs {
+	interface-type = <1>;
+	mode = <3>;
+	power = <50>;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+
+	vmmc-supply = <&reg_espresso_external>;
+	bus-width = <4>;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	vmmc-supply = <&reg_espresso_internal>;
+	ti,non-removable;
+	bus-width = <8>;
+};
+
+&mmc3 {
+	status = "disabled";
+};
+
+&mmc4 {
+	status = "disabled";
+};
+
+&mmc5 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	vmmc-supply = <&reg_espresso_wlan>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc5_pins>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_host_wake>;
+	};
+};
+
+&uart2 {
+	interrupts-extended = <&wakeupgen GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH
+				&omap4_pmx_core OMAP4_UART2_RX>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bluetooth_pins>;
+		shutdown-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+		device-wakeup-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
+	};
+};
-- 
2.43.0

[PATCH v9 6/8] dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0 and 10.1

[Mithil Bavishi]

Add samsung-espresso7 codename for the 7 inch variant
Add samsung-espresso10 codename for the 10 inch variant

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 Documentation/devicetree/bindings/arm/ti/omap.yaml | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/ti/omap.yaml b/Documentation/devicetree/bindings/arm/ti/omap.yaml
index 14f1b9d8f..f694dcbf2 100644
--- a/Documentation/devicetree/bindings/arm/ti/omap.yaml
+++ b/Documentation/devicetree/bindings/arm/ti/omap.yaml
@@ -144,6 +144,8 @@ properties:
               - motorola,droid-bionic   # Motorola Droid Bionic XT875
               - motorola,xyboard-mz609
               - motorola,xyboard-mz617
+              - samsung,espresso7
+              - samsung,espresso10
               - ti,omap4-panda
               - ti,omap4-sdp
           - const: ti,omap4430
-- 
2.43.0

[PATCH v9 7/8] ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy Tab 2 7.0

[Mithil Bavishi]

Create a device tree for the 7 inch variants (P3100, P3110, P3113)

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 arch/arm/boot/dts/ti/omap/Makefile            |  1 +
 .../dts/ti/omap/omap4-samsung-espresso7.dts   | 70 +++++++++++++++++++
 2 files changed, 71 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts

diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index 3f54b515c..1fd426204 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-sdp-es23plus.dtb \
 	omap4-var-dvk-om44.dtb \
 	omap4-var-stk-om44.dtb \
+	omap4-samsung-espresso7.dtb \
 	omap4-xyboard-mz609.dtb \
 	omap4-xyboard-mz617.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
new file mode 100644
index 000000000..cae37ff06
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso7.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "omap4-samsung-espresso-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy Tab 2 (7 inch)";
+	compatible = "samsung,espresso7", "ti,omap4430", "ti,omap4";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm10 0 1200 0>;
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <2>;
+	};
+
+	panel {
+		compatible = "samsung,ltn070nl01", "panel-lvds";
+		power-supply = <&reg_lcd>;
+		width-mm = <154>;
+		height-mm = <90>;
+		data-mapping = "vesa-24";
+		backlight = <&backlight>;
+
+		panel-timing {
+			clock-frequency = <47255554>;
+
+			hback-porch = <210>;
+			hactive = <1024>;
+			hfront-porch = <186>;
+			hsync-len = <50>;
+
+			vback-porch = <11>;
+			vactive = <600>;
+			vfront-porch = <24>;
+			vsync-len = <10>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+			syncclk-active = <0>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touchscreen@48 {
+		compatible = "melfas,mms136";
+		reg = <0x48>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+		avdd-supply = <&reg_touch_ldo_en>;
+		vdd-supply = <&ldo6>;
+	};
+};
-- 
2.43.0

[PATCH v9 8/8] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1

[Mithil Bavishi]

Create a device tree for the 10 inch variants (P5100, P5110, P5113)

Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
---
 arch/arm/boot/dts/ti/omap/Makefile            |   1 +
 .../dts/ti/omap/omap4-samsung-espresso10.dts  | 101 ++++++++++++++++++
 2 files changed, 102 insertions(+)
 create mode 100644 arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts

diff --git a/arch/arm/boot/dts/ti/omap/Makefile b/arch/arm/boot/dts/ti/omap/Makefile
index 1fd426204..be992910f 100644
--- a/arch/arm/boot/dts/ti/omap/Makefile
+++ b/arch/arm/boot/dts/ti/omap/Makefile
@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-var-dvk-om44.dtb \
 	omap4-var-stk-om44.dtb \
 	omap4-samsung-espresso7.dtb \
+	omap4-samsung-espresso10.dtb \
 	omap4-xyboard-mz609.dtb \
 	omap4-xyboard-mz617.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
diff --git a/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
new file mode 100644
index 000000000..558dc3c02
--- /dev/null
+++ b/arch/arm/boot/dts/ti/omap/omap4-samsung-espresso10.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "omap4-samsung-espresso-common.dtsi"
+#include <dt-bindings/power/summit,smb347-charger.h>
+/ {
+	model = "Samsung Galaxy Tab 2 (10 inch)";
+	compatible = "samsung,espresso10", "ti,omap4430", "ti,omap4";
+
+	i2c-gpio5 {
+		smb347: charger@6 {
+			compatible = "summit,smb347";
+			reg = <0x6>; // 0x0C >> 1
+			interrupt-parent = <&gpio2>;
+			interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
+
+			summit,enable-usb-charging;
+			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+			summit,chip-temperature-threshold-celsius = <120>;
+			summit,usb-current-limit-microamp = <1800000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm10 0 1600 0>;
+		power-supply = <&reg_lcd>;
+		enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	panel {
+		compatible = "samsung,ltn101al03", "panel-lvds";
+		power-supply = <&reg_lcd>;
+		width-mm = <223>;
+		height-mm = <125>;
+		data-mapping = "vesa-24";
+		backlight = <&backlight>;
+
+		panel-timing {
+			clock-frequency = <69818000>;
+
+			hback-porch = <64>;
+			hactive = <1280>;
+			hfront-porch = <16>;
+			hsync-len = <48>;
+
+			vback-porch = <11>;
+			vactive = <800>;
+			vfront-porch = <16>;
+			vsync-len = <3>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_pins>;
+
+		//avdd-supply = <&reg_touch_ldo_en>;
+		vdd-supply = <&ldo6>;
+
+		syna,reset-delay-ms = <200>;
+		syna,startup-delay-ms = <200>;
+
+		rmi4-f01@1 {
+			reg = <0x01>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-size-x = <1280>;
+			touchscreen-size-y = <800>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
-- 
2.43.0

Re: [PATCH v9 1/8] ARM: dts: twl6032: Add DTS file for TWL6032 PMIC

[Andreas Kemnade]

On Tue,  3 Mar 2026 15:30:10 -0500
Mithil Bavishi <bavishimithil@gmail.com> wrote:

> Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
> has driver support with TWL6030 (Phoenix) since both of them are so
> similar, some nodes can be reused from TWL6030 as well
> 
> This can be included in the board files like twl6030
> Example:
> ...
> &i2c1 {
>     twl: twl@48 {
>         reg = <0x48>;
>         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>         interrupt-controller;
>         interrupt-parent = <&gic>;
>     };
> };
> 
> /include/ "twl6032.dtsi"
> ...
> 
> Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>


The best answer no that design antipattern in the twl driver
implementation. So

Reviewed-by: Andreas Kemnade <andreas@kemnade.info>

Re: [PATCH v9 5/8] ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series

[Andreas Kemnade]

On Tue,  3 Mar 2026 15:30:14 -0500
Mithil Bavishi <bavishimithil@gmail.com> wrote:

> Create common device tree for Samsung Espresso series devices
> 
> Create a shared device tree for all variants first.
> Device-specific trees will be added later based on screen size.
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>

Reviewed-by: Andreas Kemnade <andreas@kemnade.info>

Re: [PATCH v9 6/8] dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0 and 10.1

[Andreas Kemnade]

On Tue,  3 Mar 2026 15:30:15 -0500
Mithil Bavishi <bavishimithil@gmail.com> wrote:

> Add samsung-espresso7 codename for the 7 inch variant
> Add samsung-espresso10 codename for the 10 inch variant
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>


Reviewed-by: Andreas Kemnade <andreas@kemnade.info>

Re: [PATCH v9 7/8] ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy Tab 2 7.0

[Andreas Kemnade]

On Tue,  3 Mar 2026 15:30:16 -0500
Mithil Bavishi <bavishimithil@gmail.com> wrote:

> Create a device tree for the 7 inch variants (P3100, P3110, P3113)
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>

Reviewed-by: Andreas Kemnade <andreas@kemnade.info>

Re: [PATCH v9 8/8] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1

[Andreas Kemnade]

On Tue,  3 Mar 2026 15:30:17 -0500
Mithil Bavishi <bavishimithil@gmail.com> wrote:

> Create a device tree for the 10 inch variants (P5100, P5110, P5113)
> 
> Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>

Reviewed-by: Andreas Kemnade <andreas@kemnade.info>

Re: [PATCH v9 0/8] Initial support for Samsung Galaxy Tab 2 series

[Kevin Hilman]

On Tue, 03 Mar 2026 15:30:09 -0500, Mithil Bavishi wrote:
> This series adds initial support for the Samsung Galaxy Tab 2
> (samsung-espresso7/10) series of devices. It adds support for 6 variants
> (P3100, P3110, P3113, P5100, P5110, P5113). Downstream categorised them
> based on 3G and WiFi, but since they use different panel, touch
> controllers, batteries, I decided to categorise them based on screen
> size as espresso7 and espresso10.
> 
> [...]

Applied, thanks!

[1/8] ARM: dts: twl6032: Add DTS file for TWL6032 PMIC
      commit: 3b142fdcae780cb67ab4cab61cf71647e9566411
[2/8] dt-bindings: vendor-prefixes: Add Doestek
      commit: e17a1b049128274386ebcc9bc88e2fe4fb81a4db
[3/8] dt-bindings: display: bridge: lvds-codec: add doestek,dtc34lm85am
      commit: 3e375496c6d0f8c506afebc7de6bbfc392a6de00
[4/8] dt-bindings: display: panel-lvds: Add compatibles for Samsung LTN070NL01 and LTN101AL03 panels
      commit: bd861514cafab553b7b4dcc3b436a8036c90150f
[5/8] ARM: dts: ti: omap: espresso-common: Add common device tree for Samsung Galaxy Tab 2 series
      commit: f768d54723d13a10e7c7556aeb6087e8938f2951
[6/8] dt-bindings: omap: Add Samsung Galaxy Tab 2 7.0 and 10.1
      commit: 9b2ee6dd895625155ad90c2430e85e9a8885c2c6
[7/8] ARM: dts: ti: omap: samsung-espresso7: Add initial support for Galaxy Tab 2 7.0
      commit: f1bf8f53355411d5afbf0421b59c7218d68e081e
[8/8] ARM: dts: ti: omap: samsung-espresso10: Add initial support for Galaxy Tab 2 10.1
      commit: 16dcd2c7535ed09e97fc075cad97814f0e8968ed

Best regards,
-- 
Kevin Hilman <khilman@baylibre.com>

Re: (subset) [PATCH v9 0/8] Initial support for Samsung Galaxy Tab 2 series

[Neil Armstrong]

Hi,

On Tue, 03 Mar 2026 15:30:09 -0500, Mithil Bavishi wrote:
> This series adds initial support for the Samsung Galaxy Tab 2
> (samsung-espresso7/10) series of devices. It adds support for 6 variants
> (P3100, P3110, P3113, P5100, P5110, P5113). Downstream categorised them
> based on 3G and WiFi, but since they use different panel, touch
> controllers, batteries, I decided to categorise them based on screen
> size as espresso7 and espresso10.
> 
> [...]

Thanks, Applied to https://gitlab.freedesktop.org/drm/misc/kernel.git (drm-misc-next)

[4/8] dt-bindings: display: panel-lvds: Add compatibles for Samsung LTN070NL01 and LTN101AL03 panels
      https://gitlab.freedesktop.org/drm/misc/kernel/-/commit/d37690b5e02418a2365548300628ef3895a24ed2

-- 
Neil