[PATCH 7/7] clk: qcom: camcc-sc8180x: Disable always-on clocks on probe failure

[Val Packett <val@packett.cool>]

Align runtime PM code with sc8280xp, fixing clocks being left always-on
in case qcom_cc_really_probe fails.

Fixes: 691f3413baa4 ("clk: qcom: camcc-sc8180x: Add SC8180X camera clock controller driver")
Signed-off-by: Val Packett <val@packett.cool>
---
 drivers/clk/qcom/camcc-sc8180x.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/camcc-sc8180x.c b/drivers/clk/qcom/camcc-sc8180x.c
index 388fedf1dc81..7cf24d5c3abf 100644
--- a/drivers/clk/qcom/camcc-sc8180x.c
+++ b/drivers/clk/qcom/camcc-sc8180x.c
@@ -2852,8 +2852,8 @@ static int cam_cc_sc8180x_probe(struct platform_device *pdev)
 
 	regmap = qcom_cc_map(pdev, &cam_cc_sc8180x_desc);
 	if (IS_ERR(regmap)) {
-		pm_runtime_put(&pdev->dev);
-		return PTR_ERR(regmap);
+		ret = PTR_ERR(regmap);
+		goto err_put_rpm;
 	}
 
 	clk_trion_pll_configure(&cam_cc_pll0, regmap, &cam_cc_pll0_config);
@@ -2869,9 +2869,19 @@ static int cam_cc_sc8180x_probe(struct platform_device *pdev)
 	qcom_branch_set_clk_en(regmap, 0xc200); /* CAM_CC_SLEEP_CLK */
 
 	ret = qcom_cc_really_probe(&pdev->dev, &cam_cc_sc8180x_desc, regmap);
+	if (ret)
+		goto err_disable;
 
 	pm_runtime_put(&pdev->dev);
 
+	return 0;
+
+err_disable:
+	regmap_update_bits(regmap, 0xc1e4, BIT(0), 0);
+	regmap_update_bits(regmap, 0xc200, BIT(0), 0);
+err_put_rpm:
+	pm_runtime_put_sync(&pdev->dev);
+
 	return ret;
 }
 
-- 
2.52.0