From: "Derek J. Clark" <derekjohn.clark@gmail.com>
To: Jiri Kosina <jikos@kernel.org>, Benjamin Tissoires <bentiss@kernel.org>
Cc: Richard Hughes <hughsient@gmail.com>,
Mario Limonciello <mario.limonciello@amd.com>,
Zhixin Zhang <zhangzx36@lenovo.com>,
Mia Shao <shaohz1@lenovo.com>,
Mark Pearson <mpearson-lenovo@squebb.ca>,
"Pierre-Loup A . Griffais" <pgriffais@valvesoftware.com>,
"Derek J . Clark" <derekjohn.clark@gmail.com>,
linux-input@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v6 11/19] HID: hid-lenovo-go-s: Add MCU ID Attribute
Date: Tue, 10 Mar 2026 07:29:29 +0000 [thread overview]
Message-ID: <20260310072937.3295875-12-derekjohn.clark@gmail.com> (raw)
In-Reply-To: <20260310072937.3295875-1-derekjohn.clark@gmail.com>
Adds command to probe for the MCU ID of the Lenovo Legion Go S
Controller and assign it to a device attribute.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
---
v6:
- Use NULL instead of 0 in mcu_propery_out when there is no data.
---
drivers/hid/hid-lenovo-go-s.c | 56 +++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/hid/hid-lenovo-go-s.c b/drivers/hid/hid-lenovo-go-s.c
index c9f57dfa145a..8ee75f724b5b 100644
--- a/drivers/hid/hid-lenovo-go-s.c
+++ b/drivers/hid/hid-lenovo-go-s.c
@@ -18,6 +18,7 @@
#include <linux/mutex.h>
#include <linux/printk.h>
#include <linux/string.h>
+#include <linux/sysfs.h>
#include <linux/types.h>
#include <linux/unaligned.h>
#include <linux/usb.h>
@@ -34,8 +35,13 @@ static struct hid_gos_cfg {
struct completion send_cmd_complete;
struct hid_device *hdev;
struct mutex cfg_mutex; /*ensure single synchronous output report*/
+ u8 mcu_id[12];
} drvdata;
+struct gos_cfg_attr {
+ u8 index;
+};
+
struct command_report {
u8 cmd;
u8 sub_cmd;
@@ -70,6 +76,14 @@ static int hid_gos_version_event(u8 *data)
return 0;
}
+static int hid_gos_mcu_id_event(struct command_report *cmd_rep)
+{
+ drvdata.mcu_id[0] = cmd_rep->sub_cmd;
+ memcpy(&drvdata.mcu_id[1], cmd_rep->data, 11);
+
+ return 0;
+}
+
static int get_endpoint_address(struct hid_device *hdev)
{
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
@@ -103,6 +117,9 @@ static int hid_gos_raw_event(struct hid_device *hdev, struct hid_report *report,
case GET_VERSION:
ret = hid_gos_version_event(data);
break;
+ case GET_MCU_ID:
+ ret = hid_gos_mcu_id_event(cmd_rep);
+ break;
default:
ret = -EINVAL;
break;
@@ -157,10 +174,41 @@ static int mcu_property_out(struct hid_device *hdev, u8 command, u8 index,
return 0;
}
+static ssize_t mcu_id_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return sysfs_emit(buf, "%*phN\n", 12, &drvdata.mcu_id);
+}
+
+/* MCU */
+static DEVICE_ATTR_RO(mcu_id);
+
+static struct attribute *legos_mcu_attrs[] = {
+ &dev_attr_mcu_id.attr,
+ NULL,
+};
+
+static const struct attribute_group mcu_attr_group = {
+ .attrs = legos_mcu_attrs,
+};
+
+static const struct attribute_group *top_level_attr_groups[] = {
+ &mcu_attr_group,
+ NULL,
+};
+
static void cfg_setup(struct work_struct *work)
{
int ret;
+ /* MCU */
+ ret = mcu_property_out(drvdata.hdev, GET_MCU_ID, FEATURE_NONE, NULL, 0);
+ if (ret) {
+ dev_err(&drvdata.hdev->dev, "Failed to retrieve MCU ID: %i\n",
+ ret);
+ return;
+ }
+
ret = mcu_property_out(drvdata.hdev, GET_VERSION, FEATURE_NONE, NULL, 0);
if (ret) {
dev_err(&drvdata.hdev->dev, "Failed to retrieve MCU Version: %i\n", ret);
@@ -177,6 +225,13 @@ static int hid_gos_cfg_probe(struct hid_device *hdev,
drvdata.hdev = hdev;
mutex_init(&drvdata.cfg_mutex);
+ ret = sysfs_create_groups(&hdev->dev.kobj, top_level_attr_groups);
+ if (ret) {
+ dev_err_probe(&hdev->dev, ret,
+ "Failed to create gamepad configuration attributes\n");
+ return ret;
+ }
+
init_completion(&drvdata.send_cmd_complete);
/* Executing calls prior to returning from probe will lock the MCU. Schedule
@@ -196,6 +251,7 @@ static void hid_gos_cfg_remove(struct hid_device *hdev)
{
guard(mutex)(&drvdata.cfg_mutex);
cancel_delayed_work_sync(&drvdata.gos_cfg_setup);
+ sysfs_remove_groups(&hdev->dev.kobj, top_level_attr_groups);
hid_hw_close(hdev);
hid_hw_stop(hdev);
hid_set_drvdata(hdev, NULL);
--
2.53.0
next prev parent reply other threads:[~2026-03-10 7:29 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-10 7:29 [PATCH v6 00/19] HID: Add Legion Go and Go S Drivers Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 01/19] include: device.h: Add named device attributes Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 02/19] HID: hid-lenovo-go: Add Lenovo Legion Go Series HID Driver Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 03/19] HID: hid-lenovo-go: Add Feature Status Attributes Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 04/19] HID: hid-lenovo-go: Add Rumble and Haptic Settings Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 05/19] HID: hid-lenovo-go: Add FPS Mode DPI settings Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 06/19] HID: hid-lenovo-go: Add RGB LED control interface Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 07/19] HID: hid-lenovo-go: Add Calibration Settings Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 08/19] HID: hid-lenovo-go: Add OS Mode Toggle Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 09/19] HID: Include firmware version in the uevent Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 10/19] HID: hid-lenovo-go-s: Add Lenovo Legion Go S Series HID Driver Derek J. Clark
2026-03-10 7:29 ` Derek J. Clark [this message]
2026-03-10 7:29 ` [PATCH v6 12/19] HID: hid-lenovo-go-s: Add Feature Status Attributes Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 13/19] HID: hid-lenovo-go-s: Add Touchpad Mode Attributes Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 14/19] HID: hid-lenovo-go-s: Add RGB LED control interface Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 15/19] HID: hid-lenovo-go-s: Add IMU and Touchpad RO Attributes Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 16/19] HID: Add documentation for Lenovo Legion Go drivers Derek J. Clark
2026-03-12 2:44 ` Akira Yokosawa
2026-03-12 22:57 ` Derek John Clark
2026-03-10 7:29 ` [PATCH v6 17/19] HID: hid-lenovo-go-s: Remove unneeded semicolon Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 18/19] HID: hid-lenovo-go: " Derek J. Clark
2026-03-10 7:29 ` [PATCH v6 19/19] HID: hid-lenovo-go-s: Fix spelling mistake "configuratiion" -> "configuration" Derek J. Clark
2026-03-10 16:55 ` [PATCH v6 00/19] HID: Add Legion Go and Go S Drivers Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260310072937.3295875-12-derekjohn.clark@gmail.com \
--to=derekjohn.clark@gmail.com \
--cc=bentiss@kernel.org \
--cc=hughsient@gmail.com \
--cc=jikos@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mario.limonciello@amd.com \
--cc=mpearson-lenovo@squebb.ca \
--cc=pgriffais@valvesoftware.com \
--cc=shaohz1@lenovo.com \
--cc=zhangzx36@lenovo.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox