public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
	"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
	"Jacopo Mondi" <jacopo.mondi@ideasonboard.com>
Subject: Re: [PATCH v5 05/10] media: rcar-isp: Switch to Streams API
Date: Wed, 18 Mar 2026 23:12:18 +0200	[thread overview]
Message-ID: <20260318211218.GI716464@killaraus.ideasonboard.com> (raw)
In-Reply-To: <20260311-rcar-streams-v5-5-3e6c957d7567@ideasonboard.com>

On Wed, Mar 11, 2026 at 03:53:18PM +0200, Tomi Valkeinen wrote:
> Switch to Streams API with a single hardcoded route.
> 
> For single-stream use case there should be no change in behavior.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

> ---
>  drivers/media/platform/renesas/rcar-isp/csisp.c | 69 ++++++++++++++++++++++---
>  1 file changed, 62 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/platform/renesas/rcar-isp/csisp.c b/drivers/media/platform/renesas/rcar-isp/csisp.c
> index 58a9a3bd9f75..8ac45516aa39 100644
> --- a/drivers/media/platform/renesas/rcar-isp/csisp.c
> +++ b/drivers/media/platform/renesas/rcar-isp/csisp.c
> @@ -124,6 +124,17 @@ static const struct rcar_isp_format rcar_isp_formats[] = {
>  	},
>  };
>  
> +static const struct v4l2_mbus_framefmt risp_default_fmt = {
> +	.width = 1920,
> +	.height = 1080,
> +	.code = MEDIA_BUS_FMT_RGB888_1X24,
> +	.colorspace = V4L2_COLORSPACE_SRGB,
> +	.field = V4L2_FIELD_NONE,
> +	.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> +	.quantization = V4L2_QUANTIZATION_DEFAULT,
> +	.xfer_func = V4L2_XFER_FUNC_DEFAULT,
> +};
> +
>  static const struct rcar_isp_format *risp_code_to_fmt(unsigned int code)
>  {
>  	unsigned int i;
> @@ -216,13 +227,20 @@ static void risp_power_off(struct rcar_isp *isp)
>  
>  static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
>  {
> +	const struct v4l2_subdev_route *route;
>  	const struct v4l2_mbus_framefmt *fmt;
>  	const struct rcar_isp_format *format;
>  	unsigned int vc;
>  	u32 sel_csi = 0;
>  	int ret;
>  
> -	fmt = v4l2_subdev_state_get_format(state, RCAR_ISP_SINK);
> +	if (state->routing.num_routes != 1)
> +		return -EINVAL;
> +
> +	route = &state->routing.routes[0];
> +
> +	fmt = v4l2_subdev_state_get_format(state, route->sink_pad,
> +					   route->sink_stream);
>  	if (!fmt)
>  		return -EINVAL;
>  
> @@ -341,7 +359,7 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
>  			       struct v4l2_subdev_state *state,
>  			       struct v4l2_subdev_format *format)
>  {
> -	struct v4l2_mbus_framefmt *framefmt;
> +	struct v4l2_mbus_framefmt *fmt;
>  
>  	if (format->pad > RCAR_ISP_SINK)
>  		return v4l2_subdev_get_fmt(sd, state, format);
> @@ -349,10 +367,20 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
>  	if (!risp_code_to_fmt(format->format.code))
>  		format->format.code = rcar_isp_formats[0].code;
>  
> -	for (unsigned int i = 0; i < RCAR_ISP_NUM_PADS; i++) {
> -		framefmt = v4l2_subdev_state_get_format(state, i);
> -		*framefmt = format->format;
> -	}
> +	/* Set sink format. */
> +	fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	*fmt = format->format;
> +
> +	/* Propagate the format to the source pad. */
> +	fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
> +							   format->stream);
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	*fmt = format->format;
>  
>  	return 0;
>  }
> @@ -369,6 +397,32 @@ static const struct v4l2_subdev_ops rcar_isp_subdev_ops = {
>  	.pad	= &risp_pad_ops,
>  };
>  
> +static int risp_init_state(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_state *state)
> +{
> +	static struct v4l2_subdev_route routes[] = {
> +		{
> +			.sink_pad = RCAR_ISP_SINK,
> +			.sink_stream = 0,
> +			.source_pad = RCAR_ISP_PORT0,
> +			.source_stream = 0,
> +			.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> +		},
> +	};
> +
> +	static const struct v4l2_subdev_krouting routing = {
> +		.num_routes = ARRAY_SIZE(routes),
> +		.routes = routes,
> +	};
> +
> +	return v4l2_subdev_set_routing_with_fmt(sd, state, &routing,
> +						&risp_default_fmt);
> +}
> +
> +static const struct v4l2_subdev_internal_ops risp_internal_ops = {
> +	.init_state = risp_init_state,
> +};
> +
>  /* -----------------------------------------------------------------------------
>   * Async handling and registration of subdevices and links
>   */
> @@ -526,11 +580,12 @@ static int risp_probe(struct platform_device *pdev)
>  
>  	isp->subdev.owner = THIS_MODULE;
>  	isp->subdev.dev = &pdev->dev;
> +	isp->subdev.internal_ops = &risp_internal_ops;
>  	v4l2_subdev_init(&isp->subdev, &rcar_isp_subdev_ops);
>  	v4l2_set_subdevdata(&isp->subdev, &pdev->dev);
>  	snprintf(isp->subdev.name, sizeof(isp->subdev.name), "%s %s",
>  		 KBUILD_MODNAME, dev_name(&pdev->dev));
> -	isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
>  
>  	isp->subdev.entity.function = MEDIA_ENT_F_VID_MUX;
>  	isp->subdev.entity.ops = &risp_entity_ops;
> 

-- 
Regards,

Laurent Pinchart

  reply	other threads:[~2026-03-18 21:12 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-11 13:53 [PATCH v5 00/10] media: rcar: Streams support Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 01/10] media: rcar-vin: Link VINs on Gen3 to a single channel on each CSI-2 Tomi Valkeinen
2026-04-04 12:09   ` Niklas Söderlund
2026-03-11 13:53 ` [PATCH v5 02/10] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2026-03-18 20:44   ` Laurent Pinchart
2026-03-11 13:53 ` [PATCH v5 03/10] media: rcar-csi2: " Tomi Valkeinen
2026-03-18 20:54   ` Laurent Pinchart
2026-04-04 12:19     ` Niklas Söderlund
2026-03-11 13:53 ` [PATCH v5 04/10] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2026-03-18 21:04   ` Laurent Pinchart
2026-03-11 13:53 ` [PATCH v5 05/10] media: rcar-isp: " Tomi Valkeinen
2026-03-18 21:12   ` Laurent Pinchart [this message]
2026-03-11 13:53 ` [PATCH v5 06/10] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2026-03-18 21:16   ` Laurent Pinchart
2026-03-11 13:53 ` [PATCH v5 07/10] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 08/10] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 09/10] media: rcar-csi2: Add full streams support Tomi Valkeinen
2026-03-11 13:53 ` [PATCH v5 10/10] media: rcar-isp: " Tomi Valkeinen
2026-03-11 17:38 ` [PATCH v5 00/10] media: rcar: Streams support Niklas Söderlund
2026-03-11 18:03   ` Tomi Valkeinen
2026-03-18 20:33 ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260318211218.GI716464@killaraus.ideasonboard.com \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen+renesas@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox