Re: [PATCH 1/3] dt-bindings: usb: dwc3: spacemit: add support for K3 SoC

[Yixun Lan <dlan@kernel.org>]

Hi Conor,

On 17:21 Wed 18 Mar     , Conor Dooley wrote:
> On Wed, Mar 18, 2026 at 05:44:35AM +0800, Yixun Lan wrote:
> > Hi Conor,
> > 
> > On 12:55 Tue 17 Mar     , Conor Dooley wrote:
> > > On Tue, Mar 17, 2026 at 11:53:02AM +0000, Yixun Lan wrote:
> > > > Add compatible string for DWC3 USB controller found in SpacemiT K3 SoC.
> > > > The USB2.0 host controller in K3 SoC actually use DWC3 IP but only has
> > > > USB2.0 functionality, and requires only one USB2.0 PHY connected.
> > > > 
> > > > Explicitly reduce number of phy property to minimal one.
> > > 
> > > Is this valid for the existing compatible, will it work with only one
> > > clock?
> > > 
> > I didn't change clock binding, do you mean phy?
> > 
> > Both k1 and k3 work with one clock (no change here)
> > 
> > for phy, the existing k1 requires two. for k3, one controller requires
> > one phy due to only has USB2.0 support, other controllers requires two
> > phys - USB2, USB3 PHY
> 
> Yep, phy is what I meant. Sorry bout that. Since you're relaxing the
> constraints for the k1, can you please add a conditional section to the
> binding to enforce 2 phys min for k1?
> 

To be explicit, the change should be applied to both K1 and K3, even in K1
use case, it's perfectly fine for designer to choose enabling USB2.0
only, and leave the comb phy to pcie contoller, so only one phy required

While revisiting the DT file, the phy related property should be moved
to board level, but this is another thing we should fix..

-- 
Yixun Lan (dlan)