From: Tabrez Ahmed <tabreztalks@gmail.com>
To: linux@roeck-us.net
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
shuah@kernel.org, me@brighamcampbell.com,
Tabrez Ahmed <tabreztalks@gmail.com>
Subject: [PATCH v2 1/2] hwmon: (ads7871) Convert to hwmon_device_register_with_info
Date: Sun, 29 Mar 2026 13:03:51 +0530 [thread overview]
Message-ID: <20260329073352.270451-2-tabreztalks@gmail.com> (raw)
In-Reply-To: <20260329073352.270451-1-tabreztalks@gmail.com>
Convert the ads7871 driver from the legacy hwmon_device_register() to the
modern hwmon_device_register_with_info() API. This migration simplifies
the driver by using the structured hwmon_channel_info approach and
prepares the codebase for the transition to a shared DMA-safe buffer.
Signed-off-by: Tabrez Ahmed <tabreztalks@gmail.com>
---
drivers/hwmon/ads7871.c | 76 ++++++++++++++++++++++-------------------
1 file changed, 41 insertions(+), 35 deletions(-)
diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c
index 9bfdf9e6bcd77..41a1e9bbd4050 100644
--- a/drivers/hwmon/ads7871.c
+++ b/drivers/hwmon/ads7871.c
@@ -56,7 +56,6 @@
#include <linux/init.h>
#include <linux/spi/spi.h>
#include <linux/hwmon.h>
-#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/delay.h>
@@ -65,10 +64,20 @@
struct ads7871_data {
struct spi_device *spi;
};
+static umode_t ads7871_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ if (type == hwmon_in && attr == hwmon_in_input)
+ return 0444;
+
+ return 0;
+}
static int ads7871_read_reg8(struct spi_device *spi, int reg)
{
int ret;
+
reg = reg | INST_READ_BM;
ret = spi_w8r8(spi, reg);
return ret;
@@ -77,6 +86,7 @@ static int ads7871_read_reg8(struct spi_device *spi, int reg)
static int ads7871_read_reg16(struct spi_device *spi, int reg)
{
int ret;
+
reg = reg | INST_READ_BM | INST_16BIT_BM;
ret = spi_w8r16(spi, reg);
return ret;
@@ -85,19 +95,20 @@ static int ads7871_read_reg16(struct spi_device *spi, int reg)
static int ads7871_write_reg8(struct spi_device *spi, int reg, u8 val)
{
u8 tmp[2] = {reg, val};
+
return spi_write(spi, tmp, sizeof(tmp));
}
-static ssize_t voltage_show(struct device *dev, struct device_attribute *da,
- char *buf)
+static int ads7871_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
{
struct ads7871_data *pdata = dev_get_drvdata(dev);
struct spi_device *spi = pdata->spi;
- struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
- int ret, val, i = 0;
- uint8_t channel, mux_cnv;
+ int ret, raw_val, i = 0;
+ uint8_t mux_cnv;
- channel = attr->index;
+ if (type != hwmon_in || attr != hwmon_in_input)
+ return -EOPNOTSUPP;
/*
* TODO: add support for conversions
* other than single ended with a gain of 1
@@ -127,39 +138,34 @@ static ssize_t voltage_show(struct device *dev, struct device_attribute *da,
}
if (mux_cnv == 0) {
- val = ads7871_read_reg16(spi, REG_LS_BYTE);
- if (val < 0)
- return val;
+ raw_val = ads7871_read_reg16(spi, REG_LS_BYTE);
+ if (raw_val < 0)
+ return raw_val;
+
/*result in volts*10000 = (val/8192)*2.5*10000*/
- val = ((val >> 2) * 25000) / 8192;
- return sysfs_emit(buf, "%d\n", val);
+ *val = ((raw_val >> 2) * 25000) / 8192;
+ return 0;
}
return -ETIMEDOUT;
}
-static SENSOR_DEVICE_ATTR_RO(in0_input, voltage, 0);
-static SENSOR_DEVICE_ATTR_RO(in1_input, voltage, 1);
-static SENSOR_DEVICE_ATTR_RO(in2_input, voltage, 2);
-static SENSOR_DEVICE_ATTR_RO(in3_input, voltage, 3);
-static SENSOR_DEVICE_ATTR_RO(in4_input, voltage, 4);
-static SENSOR_DEVICE_ATTR_RO(in5_input, voltage, 5);
-static SENSOR_DEVICE_ATTR_RO(in6_input, voltage, 6);
-static SENSOR_DEVICE_ATTR_RO(in7_input, voltage, 7);
-
-static struct attribute *ads7871_attrs[] = {
- &sensor_dev_attr_in0_input.dev_attr.attr,
- &sensor_dev_attr_in1_input.dev_attr.attr,
- &sensor_dev_attr_in2_input.dev_attr.attr,
- &sensor_dev_attr_in3_input.dev_attr.attr,
- &sensor_dev_attr_in4_input.dev_attr.attr,
- &sensor_dev_attr_in5_input.dev_attr.attr,
- &sensor_dev_attr_in6_input.dev_attr.attr,
- &sensor_dev_attr_in7_input.dev_attr.attr,
+static const struct hwmon_channel_info * const ads7871_info[] = {
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_INPUT, HWMON_I_INPUT, HWMON_I_INPUT, HWMON_I_INPUT,
+ HWMON_I_INPUT, HWMON_I_INPUT, HWMON_I_INPUT, HWMON_I_INPUT),
NULL
};
-ATTRIBUTE_GROUPS(ads7871);
+static const struct hwmon_ops ads7871_hwmon_ops = {
+ .is_visible = ads7871_is_visible,
+ .read = ads7871_read,
+};
+
+static const struct hwmon_chip_info ads7871_chip_info = {
+ .ops = &ads7871_hwmon_ops,
+ .info = ads7871_info,
+};
static int ads7871_probe(struct spi_device *spi)
{
@@ -194,10 +200,10 @@ static int ads7871_probe(struct spi_device *spi)
return -ENOMEM;
pdata->spi = spi;
-
- hwmon_dev = devm_hwmon_device_register_with_groups(dev, spi->modalias,
- pdata,
- ads7871_groups);
+ hwmon_dev = devm_hwmon_device_register_with_info(dev, spi->modalias,
+ pdata,
+ &ads7871_chip_info,
+ NULL);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
--
2.43.0
next prev parent reply other threads:[~2026-03-29 7:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-29 7:33 [PATCH v2 0/2] hwmon: (ads7871) Modernize and fix DMA safety Tabrez Ahmed
2026-03-29 7:33 ` Tabrez Ahmed [this message]
2026-03-29 15:01 ` [PATCH v2 1/2] hwmon: (ads7871) Convert to hwmon_device_register_with_info Guenter Roeck
2026-03-29 7:33 ` [PATCH v2 2/2] hwmon: (ads7871) Use DMA-safe buffer for SPI writes Tabrez Ahmed
2026-03-29 14:52 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260329073352.270451-2-tabreztalks@gmail.com \
--to=tabreztalks@gmail.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=me@brighamcampbell.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox