From: hoff.benjamin.k@gmail.com
To: linux-media@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, mchehab@kernel.org,
hverkuil+cisco@kernel.org, Ben Hoff <hoff.benjamin.k@gmail.com>
Subject: [PATCH v3 0/2] media: pci: add AVMatrix HWS capture driver
Date: Mon, 30 Mar 2026 15:56:53 -0400 [thread overview]
Message-ID: <20260330195703.304466-1-hoff.benjamin.k@gmail.com> (raw)
In-Reply-To: <20260318001056.465071-1-hoff.benjamin.k@gmail.com>
From: Ben Hoff <hoff.benjamin.k@gmail.com>
Hi,
This series adds an in-tree AVMatrix HWS PCIe capture driver and a
matching MAINTAINERS entry.
Compared to v2, this revision makes mode-change handling explicit and
removes the previously unvalidated power-present reporting path.
Changes since v2:
- keep scratch DMA allocation on a single probe-owned path
- avoid double-freeing V4L2 control handlers on register unwind
- drop the extra per-node resolution sysfs ABI
- turn live geometry changes into explicit SOURCE_CHANGE renegotiation
- report live DV timings and reject attempts to retime a live source
- stop advertising RESOLUTION source changes for fps-only updates
- keep live fps state across harmless S_FMT restarts
- stop exposing an unvalidated DV RX power-present signal
- clean the imported sources for checkpatch and W=1 builds
Validation:
- make -C /lib/modules/$(uname -r)/build M=drivers/media/pci/hws W=1 CONFIG_VIDEO_HWS=m modules
- scripts/checkpatch.pl --strict --file drivers/media/pci/hws/*
- v4l2-compliance 1.32.0: 51 tests succeeded, 0 failed, 1 warning
The remaining v4l2-compliance warning is:
- V4L2_CID_DV_RX_POWER_PRESENT not found for input 0
DV_RX_POWER_PRESENT is intentionally left unsupported in this revision
because current hardware evidence does not expose a validated
receiver-side power-detect signal distinct from active video presence.
Ben Hoff (2):
media: pci: add AVMatrix HWS capture driver
MAINTAINERS: add entry for AVMatrix HWS driver
MAINTAINERS | 6 +
drivers/media/pci/Kconfig | 1 +
drivers/media/pci/Makefile | 1 +
drivers/media/pci/hws/Kconfig | 12 +
drivers/media/pci/hws/Makefile | 4 +
drivers/media/pci/hws/hws.h | 174 +++
drivers/media/pci/hws/hws_irq.c | 271 +++++
drivers/media/pci/hws/hws_irq.h | 10 +
drivers/media/pci/hws/hws_pci.c | 864 ++++++++++++++
drivers/media/pci/hws/hws_reg.h | 136 +++
drivers/media/pci/hws/hws_v4l2_ioctl.c | 924 +++++++++++++++
drivers/media/pci/hws/hws_v4l2_ioctl.h | 36 +
drivers/media/pci/hws/hws_video.c | 1504 ++++++++++++++++++++++++
drivers/media/pci/hws/hws_video.h | 29 +
14 files changed, 3972 insertions(+)
create mode 100644 drivers/media/pci/hws/Kconfig
create mode 100644 drivers/media/pci/hws/Makefile
create mode 100644 drivers/media/pci/hws/hws.h
create mode 100644 drivers/media/pci/hws/hws_irq.c
create mode 100644 drivers/media/pci/hws/hws_irq.h
create mode 100644 drivers/media/pci/hws/hws_pci.c
create mode 100644 drivers/media/pci/hws/hws_reg.h
create mode 100644 drivers/media/pci/hws/hws_v4l2_ioctl.c
create mode 100644 drivers/media/pci/hws/hws_v4l2_ioctl.h
create mode 100644 drivers/media/pci/hws/hws_video.c
create mode 100644 drivers/media/pci/hws/hws_video.h
--
2.53.0
next prev parent reply other threads:[~2026-03-30 19:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20260112022420.390854-1-hoff.benjamin.k@gmail.com>
2026-03-18 0:10 ` [PATCH v2 0/2] media: pci: add AVMatrix HWS capture driver Ben Hoff
2026-03-18 0:10 ` [PATCH v2 1/2] " Ben Hoff
2026-03-24 9:17 ` Hans Verkuil
2026-03-18 0:10 ` [PATCH v2 2/2] MAINTAINERS: add entry for AVMatrix HWS driver Ben Hoff
2026-03-24 9:19 ` [PATCH v2 0/2] media: pci: add AVMatrix HWS capture driver Hans Verkuil
2026-03-30 19:56 ` hoff.benjamin.k [this message]
2026-03-30 19:56 ` [PATCH v3 1/2] " hoff.benjamin.k
2026-03-30 19:56 ` [PATCH v3 2/2] MAINTAINERS: add entry for AVMatrix HWS driver hoff.benjamin.k
2026-03-30 23:36 ` [PATCH v4] media: pci: add AVMatrix HWS capture driver hoff.benjamin.k
2026-04-02 6:25 ` kernel test robot
2026-04-03 13:57 ` [PATCH v5] " hoff.benjamin.k
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260330195703.304466-1-hoff.benjamin.k@gmail.com \
--to=hoff.benjamin.k@gmail.com \
--cc=hverkuil+cisco@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox