[PATCH v3 3/5] platform/x86: hp-wmi: use mod_delayed_work to reset keep-alive timer

[Emre Cecanpunar <emreleno@gmail.com>]

Currently, schedule_delayed_work() is used to queue the 90s keep-alive
timer. If a user manually changes the fan speed at T=85s,
schedule_delayed_work() leaves the existing timer in place as it is a
no-op if the work is already pending. This results in the keep-alive
timer firing unnecessarily at T=90s, just 5 seconds after the user
action.

Replace schedule_delayed_work() with mod_delayed_work() to reset the
90s timer whenever fan settings are applied. This guarantees a full 90s
delay after every user interaction, preventing redundant keep-alive
executions and improving efficiency.

Fixes: c203c59fb5de ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
---
Changes in v3:
- Reworded commit message to clarify this is an inefficiency fix, not
  a functional bug.

 drivers/platform/x86/hp/hp-wmi.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/hp/hp-wmi.c b/drivers/platform/x86/hp/hp-wmi.c
index 79d6bc3cd223..2932cab9aa78 100644
--- a/drivers/platform/x86/hp/hp-wmi.c
+++ b/drivers/platform/x86/hp/hp-wmi.c
@@ -2361,8 +2361,8 @@ static int hp_wmi_apply_fan_settings(struct hp_wmi_hwmon_priv *priv)
 		ret = hp_wmi_fan_speed_max_set(1);
 		if (ret < 0)
 			return ret;
-		schedule_delayed_work(&priv->keep_alive_dwork,
-				      secs_to_jiffies(KEEP_ALIVE_DELAY_SECS));
+		mod_delayed_work(system_wq, &priv->keep_alive_dwork,
+				 secs_to_jiffies(KEEP_ALIVE_DELAY_SECS));
 		return 0;
 	case PWM_MODE_MANUAL:
 		if (!is_victus_s_thermal_profile())
@@ -2370,8 +2370,8 @@ static int hp_wmi_apply_fan_settings(struct hp_wmi_hwmon_priv *priv)
 		ret = hp_wmi_fan_speed_set(priv, pwm_to_rpm(priv->pwm, priv));
 		if (ret < 0)
 			return ret;
-		schedule_delayed_work(&priv->keep_alive_dwork,
-				      secs_to_jiffies(KEEP_ALIVE_DELAY_SECS));
+		mod_delayed_work(system_wq, &priv->keep_alive_dwork,
+				 secs_to_jiffies(KEEP_ALIVE_DELAY_SECS));
 		return 0;
 	case PWM_MODE_AUTO:
 		if (is_victus_s_thermal_profile()) {
-- 
2.53.0