Re: [PATCH net-next v3 4/5] ipv6: mld: encode multicast exponential fields

[Ido Schimmel <idosch@nvidia.com>]

On Fri, Apr 03, 2026 at 03:00:49PM +0000, Ujjal Roy wrote:
> In MLD, QQIC and MRC fields are not correctly encoded when
> generating query packets. Since the receiver of the query
> interprets these fields using the MLDv2 floating-point
> decoding logic, any value that exceeds the linear threshold
> is incorrectly parsed as an exponential value, leading to
> an incorrect interval calculation.
> 
> Encode and assign the corresponding protocol fields during
> query generation. Introduce the logic to dynamically
> calculate the exponent and mantissa using bit-scan (fls).
> This ensures QQIC (8-bit) and MRC (16-bit) fields are
> properly encoded when transmitting query packets with
> intervals that exceed their respective linear thresholds
> (128 for QQI; 32768 for MRD).
> 
> RFC3810: If QQIC >= 128, the QQIC field represents a
> floating-point value as follows:
>      0 1 2 3 4 5 6 7
>     +-+-+-+-+-+-+-+-+
>     |1| exp | mant  |
>     +-+-+-+-+-+-+-+-+
> 
> RFC3810: If Maximum Response Code >= 32768, the Maximum
> Response Code field represents a floating-point value as
> follows:
>      0 1 2 3 4 5 6 7 8 9 A B C D E F
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
>     |1| exp |          mant         |
>     +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> 
> Signed-off-by: Ujjal Roy <royujjal@gmail.com>

Reviewed-by: Ido Schimmel <idosch@nvidia.com>