[PATCH] scsi: ncr53c8xx: Drop CONFIG_ prefix from Zalon-specific compiler defines

[Sasha Levin <sashal@kernel.org>]

kconfiglint reports:

  X001: CONFIG_NCR53C8XX_PREFETCH referenced in Makefile but not
        defined in any Kconfig
  X001: CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS referenced in Makefile
        but not defined in any Kconfig

The ncr53c8xx SCSI driver uses two preprocessor defines that carry the
CONFIG_ prefix but are not defined in any Kconfig file:

  -DCONFIG_NCR53C8XX_PREFETCH
  -DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS

These are hardcoded compiler flags in drivers/scsi/Makefile, passed
only when CONFIG_SCSI_ZALON is enabled:

  ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
      := -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
          -DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS

The source files ncr53c8xx.c and ncr53c8xx.h check these defines
with #ifdef to enable script prefetching and disable 16-bit word
transfers respectively — both specific to the PA-RISC Zalon SCSI
controller's big-endian bus requirements.

These defines have been present since the initial git import in
commit 1da177e4c3f4 ("Linux-2.6.12-rc2"). They predate the modern Kconfig
convention that CONFIG_ prefixed symbols should always originate from
Kconfig. The third define on the same line, SCSI_NCR_BIG_ENDIAN, already
correctly omits the CONFIG_ prefix.

The CONFIG_ prefix is misleading: these are not user-configurable options
and do not appear in any Kconfig menu. They are unconditionally enabled
for all Zalon builds. Remove the CONFIG_ prefix from both symbols —
renaming them to NCR53C8XX_PREFETCH and SCSI_NCR53C8XX_NO_WORD_TRANSFERS
— to match the convention used by SCSI_NCR_BIG_ENDIAN on the same line
and to avoid confusion with actual Kconfig-managed symbols.

No functional change.

Assisted-by: Claude:claude-opus-4-6 kconfiglint
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/Makefile    | 4 ++--
 drivers/scsi/ncr53c8xx.c | 2 +-
 drivers/scsi/ncr53c8xx.h | 4 ++--
 3 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 16de3e41f94c4..842c254bb2269 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -177,8 +177,8 @@ sd_mod-$(CONFIG_BLK_DEV_ZONED) += sd_zbc.o
 
 sr_mod-objs	:= sr.o sr_ioctl.o sr_vendor.o
 ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
-		:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
-			-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+		:= -DNCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
+			-DSCSI_NCR53C8XX_NO_WORD_TRANSFERS
 CFLAGS_ncr53c8xx.o	:= $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
 zalon7xx-objs	:= zalon.o ncr53c8xx.o
 
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 4a255aafed806..5369ca3fe4fd3 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -1776,7 +1776,7 @@ struct ncb {
 **	return from the subroutine.
 */
 
-#ifdef CONFIG_NCR53C8XX_PREFETCH
+#ifdef NCR53C8XX_PREFETCH
 #define PREFETCH_FLUSH_CNT	2
 #define PREFETCH_FLUSH		SCR_CALL, PADDRH (wait_dma),
 #else
diff --git a/drivers/scsi/ncr53c8xx.h b/drivers/scsi/ncr53c8xx.h
index be38c902859e0..2f6865ca1b87d 100644
--- a/drivers/scsi/ncr53c8xx.h
+++ b/drivers/scsi/ncr53c8xx.h
@@ -397,7 +397,7 @@
 
 #else
 
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+#ifdef SCSI_NCR53C8XX_NO_WORD_TRANSFERS
 /* Only 8 or 32 bit transfers allowed */
 #define INW_OFF(o)		(readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
 #else
@@ -405,7 +405,7 @@
 #endif
 #define INL_OFF(o)		readl_raw((char __iomem *)np->reg + (o))
 
-#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
+#ifdef SCSI_NCR53C8XX_NO_WORD_TRANSFERS
 /* Only 8 or 32 bit transfers allowed */
 #define OUTW_OFF(o, val)	do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
 #else
-- 
2.53.0