From: "Aneesh Kumar K.V (Arm)" <aneesh.kumar@kernel.org>
To: linux-coco@lists.linux.dev, kvmarm@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: "Aneesh Kumar K.V (Arm)" <aneesh.kumar@kernel.org>,
Alexey Kardashevskiy <aik@amd.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Dan Williams <dan.j.williams@intel.com>,
Jason Gunthorpe <jgg@ziepe.ca>,
Jonathan Cameron <jic23@kernel.org>,
Marc Zyngier <maz@kernel.org>, Samuel Ortiz <sameo@rivosinc.com>,
Steven Price <steven.price@arm.com>,
Suzuki K Poulose <Suzuki.Poulose@arm.com>,
Will Deacon <will@kernel.org>,
Xu Yilun <yilun.xu@linux.intel.com>
Subject: [RFC PATCH v4 14/14] coco: host: arm64: Add NCOH_SYS stream support for RC endpoints
Date: Mon, 27 Apr 2026 12:21:21 +0530 [thread overview]
Message-ID: <20260427065121.916615-15-aneesh.kumar@kernel.org> (raw)
In-Reply-To: <20260427065121.916615-1-aneesh.kumar@kernel.org>
Teach the host CCA pdev setup to handle PCI_EXP_TYPE_RC_END devices.
Classify RC integrated endpoints as RMI_PDEV_FLAGS_CATEGORY_ON_CHIP_EP when
building the RMM pdev parameters, and only advertise SPDM support when a
DOE mailbox is present.
Also add the stream setup path for these devices by creating an
RMI_PDEV_STREAM_NCOH_SYS stream using the endpoint pdev and its bridge
address windows. This allows RC endpoints to participate in the TDISP flow
without requiring a separate root-port pdev.
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
---
drivers/virt/coco/arm-cca-host/arm-cca.c | 28 ++++++++++++++++++++++++
drivers/virt/coco/arm-cca-host/rmi-da.c | 10 +++++++++
2 files changed, 38 insertions(+)
diff --git a/drivers/virt/coco/arm-cca-host/arm-cca.c b/drivers/virt/coco/arm-cca-host/arm-cca.c
index 265aa0cb612a..8b1182620872 100644
--- a/drivers/virt/coco/arm-cca-host/arm-cca.c
+++ b/drivers/virt/coco/arm-cca-host/arm-cca.c
@@ -277,11 +277,39 @@ static int cca_pdev_create_ncoh_stream(struct pci_dev *pdev, unsigned long strea
return ret;
}
+static int cca_pdev_create_ncoh_sys_stream(struct pci_dev *pdev)
+{
+ int ret;
+ long stream_handle;
+ struct rmi_pdev_stream_params *params;
+ struct cca_host_pf0_ep_dsc *pf0_ep_dsc = to_cca_pf0_ep_dsc(pdev);
+
+ params = (struct rmi_pdev_stream_params *)get_zeroed_page(GFP_KERNEL);
+ if (!params)
+ return -ENOMEM;
+
+ params->flags = 0;
+ params->type = RMI_PDEV_STREAM_NCOH_SYS;
+ params->pdev_1 = virt_to_phys(pf0_ep_dsc->pdev.rmm_pdev);
+ params->pdev_2 = 0; /* ignored */
+ params->ide_sid = 0; /* ignored */
+ params->num_addr_range = pci_dev_addr_range(pdev, params->addr_range);
+
+ ret = cca_pdev_stream_connect(pdev, NULL, params, &stream_handle);
+ if (!ret)
+ pf0_ep_dsc->stream_handle = stream_handle;
+
+ free_page((unsigned long)params);
+ return ret;
+}
+
static int cca_pdev_create_streams(struct pci_dev *pdev, unsigned long stream_id)
{
switch (pci_pcie_type(pdev)) {
case PCI_EXP_TYPE_ENDPOINT:
return cca_pdev_create_ncoh_stream(pdev, stream_id);
+ case PCI_EXP_TYPE_RC_END:
+ return cca_pdev_create_ncoh_sys_stream(pdev);
default:
return -EINVAL;
}
diff --git a/drivers/virt/coco/arm-cca-host/rmi-da.c b/drivers/virt/coco/arm-cca-host/rmi-da.c
index a10ac6ff03d1..33a2551fd09f 100644
--- a/drivers/virt/coco/arm-cca-host/rmi-da.c
+++ b/drivers/virt/coco/arm-cca-host/rmi-da.c
@@ -66,6 +66,16 @@ static int init_pdev_params(struct pci_dev *pdev, struct rmi_pdev_params *params
category = RMI_PDEV_FLAGS_CATEGORY_ROOT_PORT;
break;
}
+ case PCI_EXP_TYPE_RC_END: {
+ struct cca_host_pf0_ep_dsc *pf0_ep_dsc = to_cca_pf0_ep_dsc(pdev);
+
+ /* Use SPDM if present */
+ if (pf0_ep_dsc->pci.doe_mb)
+ params->flags = RMI_PDEV_FLAGS_SPDM;
+
+ category = RMI_PDEV_FLAGS_CATEGORY_ON_CHIP_EP;
+ break;
+ }
default:
return -EINVAL;
}
--
2.43.0
prev parent reply other threads:[~2026-04-27 6:52 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-27 6:51 [RFC PATCH v4 00/14] coco/TSM: Host-side Arm CCA IDE setup via connect/disconnect callbacks Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 01/14] coco: host: arm64: Add host TSM callback and IDE stream allocation support Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 02/14] coco: host: arm64: Create RMM pdev objects for PCI endpoints Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 03/14] coco: host: arm64: Add RMM device communication helpers Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 04/14] coco: host: arm64: Add helper to stop and tear down an RMM pdev Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 05/14] X.509: Make certificate parser public Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 06/14] X.509: Parse Subject Alternative Name in certificates Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 07/14] X.509: Move certificate length retrieval into new helper Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 08/14] coco: host: arm64: Register device public key with RMM Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 09/14] coco: host: arm64: Initialize RMM pdev state for TDISP IDE connect Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 10/14] coco: host: arm64: Coordinate peer stream waits during pdev communication Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 11/14] coco: host: arm64: Connect RMM pdev streams for IDE devices Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 12/14] coco: host: arm64: Refcount root-port pdevs used by IDE streams Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` [RFC PATCH v4 13/14] PCI/TSM: Move CMA DOE mailbox discovery out of pci_tsm_pf0_constructor() Aneesh Kumar K.V (Arm)
2026-04-27 6:51 ` Aneesh Kumar K.V (Arm) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260427065121.916615-15-aneesh.kumar@kernel.org \
--to=aneesh.kumar@kernel.org \
--cc=Suzuki.Poulose@arm.com \
--cc=aik@amd.com \
--cc=catalin.marinas@arm.com \
--cc=dan.j.williams@intel.com \
--cc=jgg@ziepe.ca \
--cc=jic23@kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=sameo@rivosinc.com \
--cc=steven.price@arm.com \
--cc=will@kernel.org \
--cc=yilun.xu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox