public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: tiwai@suse.com
Cc: linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org,
	patches@opensource.cirrus.com
Subject: [PATCH] ALSA: hda: cs35l56: Fix uninitialized value in cs35l56_hda_read_acpi()
Date: Tue, 28 Apr 2026 14:05:31 +0100	[thread overview]
Message-ID: <20260428130531.169600-1-rf@opensource.cirrus.com> (raw)

Eliminate the uninitialized 'nval' in cs35l56_hda_read_acpi() if a
system-specific quirk overrides processing of the dev-index property.
The value is now stored in a new 'num_amps' member of struct cs35l56_hda
so that the quirk handler can set the value.

The quirk for the Lenovo Yoga Book 9i GenX  replaces the values from the
dev-index property with hardcoded indexes. So cs35l56_hda_read_acpi() would
then skip reading the property. But this left the 'nval' local variable
uninitialized when it is later passed to cirrus_scodec_get_speaker_id().

Fixes: 40b1c2f9b299 ("ALSA: hda/cs35l56: Workaround bad dev-index on Lenovo Yoga Book 9i GenX")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/linux-sound/aenFesLAStjrVNy8@stanley.mountain/T/#u
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
 sound/hda/codecs/side-codecs/cs35l56_hda.c | 12 +++++++-----
 sound/hda/codecs/side-codecs/cs35l56_hda.h |  1 +
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/sound/hda/codecs/side-codecs/cs35l56_hda.c b/sound/hda/codecs/side-codecs/cs35l56_hda.c
index dc25960a4f23..4c8d01799931 100644
--- a/sound/hda/codecs/side-codecs/cs35l56_hda.c
+++ b/sound/hda/codecs/side-codecs/cs35l56_hda.c
@@ -976,6 +976,7 @@ static int cs35l56_hda_system_resume(struct device *dev)
 static int cs35l56_hda_fixup_yoga9(struct cs35l56_hda *cs35l56, int *bus_addr)
 {
 	/* The cirrus,dev-index property has the wrong values */
+	cs35l56->num_amps = 2;
 	switch (*bus_addr) {
 	case 0x30:
 		cs35l56->index = 1;
@@ -1025,7 +1026,6 @@ static int cs35l56_hda_read_acpi(struct cs35l56_hda *cs35l56, int hid, int id)
 	char hid_string[8];
 	struct acpi_device *adev;
 	const char *property, *sub;
-	size_t nval;
 	int i, ret;
 
 	/*
@@ -1061,13 +1061,14 @@ static int cs35l56_hda_read_acpi(struct cs35l56_hda *cs35l56, int hid, int id)
 			ret = -EINVAL;
 			goto err;
 		}
-		nval = ret;
+		cs35l56->num_amps = ret;
 
-		ret = device_property_read_u32_array(cs35l56->base.dev, property, values, nval);
+		ret = device_property_read_u32_array(cs35l56->base.dev, property, values,
+						     cs35l56->num_amps);
 		if (ret)
 			goto err;
 
-		for (i = 0; i < nval; i++) {
+		for (i = 0; i < cs35l56->num_amps; i++) {
 			if (values[i] == id) {
 				cs35l56->index = i;
 				break;
@@ -1090,7 +1091,8 @@ static int cs35l56_hda_read_acpi(struct cs35l56_hda *cs35l56, int hid, int id)
 			 "Read ACPI _SUB failed(%ld): fallback to generic firmware\n",
 			 PTR_ERR(sub));
 	} else {
-		ret = cirrus_scodec_get_speaker_id(cs35l56->base.dev, cs35l56->index, nval, -1);
+		ret = cirrus_scodec_get_speaker_id(cs35l56->base.dev, cs35l56->index,
+						   cs35l56->num_amps, -1);
 		if (ret == -ENOENT) {
 			cs35l56->system_name = sub;
 		} else if (ret >= 0) {
diff --git a/sound/hda/codecs/side-codecs/cs35l56_hda.h b/sound/hda/codecs/side-codecs/cs35l56_hda.h
index cb4b5e7356a3..3705af7c186b 100644
--- a/sound/hda/codecs/side-codecs/cs35l56_hda.h
+++ b/sound/hda/codecs/side-codecs/cs35l56_hda.h
@@ -26,6 +26,7 @@ struct cs35l56_hda {
 	struct work_struct dsp_work;
 
 	int index;
+	int num_amps;
 	const char *system_name;
 	const char *amp_name;
 
-- 
2.47.3


             reply	other threads:[~2026-04-28 13:05 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-28 13:05 Richard Fitzgerald [this message]
2026-04-29  5:50 ` [PATCH] ALSA: hda: cs35l56: Fix uninitialized value in cs35l56_hda_read_acpi() Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260428130531.169600-1-rf@opensource.cirrus.com \
    --to=rf@opensource.cirrus.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox