From: phucduc.bui@gmail.com
To: Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>,
Masami Hiramatsu <mhiramat@kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Joris Verhaegen <verhaegen@google.com>,
Miller Liang <millerliang@google.com>,
linux-sound@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH 2/2] ASoC: uniphier: aio-dma: Use guard() for spin locks
Date: Wed, 29 Apr 2026 16:16:14 +0700 [thread overview]
Message-ID: <20260429091614.96667-3-phucduc.bui@gmail.com> (raw)
In-Reply-To: <20260429091614.96667-1-phucduc.bui@gmail.com>
From: bui duc phuc <phucduc.bui@gmail.com>
Clean up the code using guard() for spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/uniphier/aio-dma.c | 52 ++++++++++++++++--------------------
1 file changed, 23 insertions(+), 29 deletions(-)
diff --git a/sound/soc/uniphier/aio-dma.c b/sound/soc/uniphier/aio-dma.c
index c1ca55997103..c01eae55d4fc 100644
--- a/sound/soc/uniphier/aio-dma.c
+++ b/sound/soc/uniphier/aio-dma.c
@@ -32,15 +32,15 @@ static void aiodma_pcm_irq(struct uniphier_aio_sub *sub)
runtime->channels * samples_to_bytes(runtime, 1);
int ret;
- spin_lock(&sub->lock);
- ret = aiodma_rb_set_threshold(sub, runtime->dma_bytes,
- sub->threshold + bytes);
- if (!ret)
- sub->threshold += bytes;
-
- aiodma_rb_sync(sub, runtime->dma_addr, runtime->dma_bytes, bytes);
- aiodma_rb_clear_irq(sub);
- spin_unlock(&sub->lock);
+ scoped_guard(spinlock, &sub->lock) {
+ ret = aiodma_rb_set_threshold(sub, runtime->dma_bytes,
+ sub->threshold + bytes);
+ if (!ret)
+ sub->threshold += bytes;
+
+ aiodma_rb_sync(sub, runtime->dma_addr, runtime->dma_bytes, bytes);
+ aiodma_rb_clear_irq(sub);
+ }
snd_pcm_period_elapsed(sub->substream);
}
@@ -51,15 +51,15 @@ static void aiodma_compr_irq(struct uniphier_aio_sub *sub)
int bytes = runtime->fragment_size;
int ret;
- spin_lock(&sub->lock);
- ret = aiodma_rb_set_threshold(sub, sub->compr_bytes,
- sub->threshold + bytes);
- if (!ret)
- sub->threshold += bytes;
+ scoped_guard(spinlock, &sub->lock) {
+ ret = aiodma_rb_set_threshold(sub, sub->compr_bytes,
+ sub->threshold + bytes);
+ if (!ret)
+ sub->threshold += bytes;
- aiodma_rb_sync(sub, sub->compr_addr, sub->compr_bytes, bytes);
- aiodma_rb_clear_irq(sub);
- spin_unlock(&sub->lock);
+ aiodma_rb_sync(sub, sub->compr_addr, sub->compr_bytes, bytes);
+ aiodma_rb_clear_irq(sub);
+ }
snd_compr_fragment_elapsed(sub->cstream);
}
@@ -113,18 +113,16 @@ static int uniphier_aiodma_prepare(struct snd_soc_component *component,
struct uniphier_aio_sub *sub = &aio->sub[substream->stream];
int bytes = runtime->period_size *
runtime->channels * samples_to_bytes(runtime, 1);
- unsigned long flags;
int ret;
ret = aiodma_ch_set_param(sub);
if (ret)
return ret;
- spin_lock_irqsave(&sub->lock, flags);
- ret = aiodma_rb_set_buffer(sub, runtime->dma_addr,
- runtime->dma_addr + runtime->dma_bytes,
- bytes);
- spin_unlock_irqrestore(&sub->lock, flags);
+ scoped_guard(spinlock_irqsave, &sub->lock)
+ ret = aiodma_rb_set_buffer(sub, runtime->dma_addr,
+ runtime->dma_addr + runtime->dma_bytes,
+ bytes);
if (ret)
return ret;
@@ -141,9 +139,8 @@ static int uniphier_aiodma_trigger(struct snd_soc_component *component,
struct device *dev = &aio->chip->pdev->dev;
int bytes = runtime->period_size *
runtime->channels * samples_to_bytes(runtime, 1);
- unsigned long flags;
- spin_lock_irqsave(&sub->lock, flags);
+ guard(spinlock_irqsave)(&sub->lock);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
aiodma_rb_sync(sub, runtime->dma_addr, runtime->dma_bytes,
@@ -161,7 +158,6 @@ static int uniphier_aiodma_trigger(struct snd_soc_component *component,
dev_warn(dev, "Unknown trigger(%d) ignored\n", cmd);
break;
}
- spin_unlock_irqrestore(&sub->lock, flags);
return 0;
}
@@ -176,17 +172,15 @@ static snd_pcm_uframes_t uniphier_aiodma_pointer(
struct uniphier_aio_sub *sub = &aio->sub[substream->stream];
int bytes = runtime->period_size *
runtime->channels * samples_to_bytes(runtime, 1);
- unsigned long flags;
snd_pcm_uframes_t pos;
- spin_lock_irqsave(&sub->lock, flags);
+ guard(spinlock_irqsave)(&sub->lock);
aiodma_rb_sync(sub, runtime->dma_addr, runtime->dma_bytes, bytes);
if (sub->swm->dir == PORT_DIR_OUTPUT)
pos = bytes_to_frames(runtime, sub->rd_offs);
else
pos = bytes_to_frames(runtime, sub->wr_offs);
- spin_unlock_irqrestore(&sub->lock, flags);
return pos;
}
--
2.43.0
next prev parent reply other threads:[~2026-04-29 9:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-29 9:16 [PATCH 0/2] ASoC: uniphier: Use guard() for spin locks phucduc.bui
2026-04-29 9:16 ` [PATCH 1/2] ASoC: uniphier: aio-compress: " phucduc.bui
2026-04-29 9:16 ` phucduc.bui [this message]
2026-05-04 13:08 ` [PATCH 0/2] ASoC: uniphier: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260429091614.96667-3-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=broonie@kernel.org \
--cc=hayashi.kunihiko@socionext.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=millerliang@google.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=verhaegen@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox