public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Mostafa Saleh <smostafa@google.com>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,  kvmarm@lists.linux.dev,
	iommu@lists.linux.dev
Cc: catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
	 oliver.upton@linux.dev, joey.gouly@arm.com,
	suzuki.poulose@arm.com,  yuzenghui@huawei.com, joro@8bytes.org,
	jean-philippe@linaro.org, jgg@ziepe.ca,  mark.rutland@arm.com,
	qperret@google.com, tabba@google.com,  vdonnefort@google.com,
	sebastianene@google.com, keirf@google.com,
	 Mostafa Saleh <smostafa@google.com>
Subject: [PATCH v6 17/25] iommu/arm-smmu-v3-kvm: Emulate CMDQ for host
Date: Fri,  1 May 2026 11:19:19 +0000	[thread overview]
Message-ID: <20260501111928.259252-18-smostafa@google.com> (raw)
In-Reply-To: <20260501111928.259252-1-smostafa@google.com>

Don’t allow access to the command queue from the host:
- ARM_SMMU_CMDQ_BASE: Only allowed to be written when CMDQ is disabled, we
  use it to keep track of the host command queue base.
  Reads return the saved value.
- ARM_SMMU_CMDQ_PROD: Writes trigger command queue emulation which sanitise
  and filters the whole range. Reads returns the host copy.
- ARM_SMMU_CMDQ_CONS: Writes move the sw copy of the cons, but the host
  can’t skip commands once submitted. Reads return the emulated value and
  the error bits in the actual cons.

Signed-off-by: Mostafa Saleh <smostafa@google.com>
---
 .../iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c  | 128 +++++++++++++++++-
 1 file changed, 124 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c
index aac455599728..1633a3cf8a3b 100644
--- a/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c
+++ b/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c
@@ -100,7 +100,6 @@ static int smmu_unshare_pages(phys_addr_t addr, size_t size)
 	return 0;
 }
 
-__maybe_unused
 static bool smmu_cmdq_has_space(struct arm_smmu_queue *cmdq, u32 n)
 {
 	struct arm_smmu_ll_queue *llq = &cmdq->llq;
@@ -351,6 +350,92 @@ static int smmu_init(void)
 	return ret;
 }
 
+static bool smmu_filter_command(struct hyp_arm_smmu_v3_device *smmu, u64 *command)
+{
+	u64 command0 = le64_to_cpu(command[0]);
+	u64 command1 = le64_to_cpu(command[1]);
+	u64 type = FIELD_GET(CMDQ_0_OP, command0);
+
+	switch (type) {
+	case CMDQ_OP_CFGI_STE:
+		/* TBD: SHADOW_STE*/
+		break;
+	case CMDQ_OP_CFGI_ALL:
+	{
+		/*
+		 * Linux doesn't use range STE invalidation, and only use this
+		 * for CFGI_ALL, which is done on reset and not on an new STE
+		 * being used.
+		 * Although, this is not architectural we rely on the current Linux
+		 * implementation.
+		 */
+		if ((FIELD_GET(CMDQ_CFGI_1_RANGE, command1) != 31))
+			return true;
+		break;
+	}
+	case CMDQ_OP_TLBI_NH_ASID:
+	case CMDQ_OP_TLBI_NH_VA:
+	case 0x13: /* CMD_TLBI_NH_VAA: Not used by Linux */
+	{
+		/* Only allow VMID = 0 */
+		if (FIELD_GET(CMDQ_TLBI_0_VMID, command0) != 0)
+			return true;
+		break;
+	}
+	case 0x10: /* CMD_TLBI_NH_ALL: Not used by Linux */
+	case CMDQ_OP_TLBI_EL2_ALL:
+	case CMDQ_OP_TLBI_EL2_VA:
+	case CMDQ_OP_TLBI_EL2_ASID:
+	case CMDQ_OP_TLBI_S12_VMALL:
+	case CMDQ_OP_TLBI_S2_IPA:
+	case 0x23: /* CMD_TLBI_EL2_VAA: Not used by Linux */
+		return true;
+	case CMDQ_OP_CMD_SYNC:
+		if (FIELD_GET(CMDQ_SYNC_0_CS, command0) == CMDQ_SYNC_0_CS_IRQ) {
+			/* Allow it, but let the host timeout, as this should never happen. */
+			command0 &= ~CMDQ_SYNC_0_CS;
+			command0 |= FIELD_PREP(CMDQ_SYNC_0_CS, CMDQ_SYNC_0_CS_SEV);
+			command1 &= ~CMDQ_SYNC_1_MSIADDR_MASK;
+		}
+		break;
+	}
+
+	return false;
+}
+
+static int smmu_emulate_cmdq_insert(struct hyp_arm_smmu_v3_device *smmu)
+{
+	u64 *host_cmdq = hyp_phys_to_virt(smmu->cmdq_host.q_base & Q_BASE_ADDR_MASK);
+	bool use_wfe = smmu->features & ARM_SMMU_FEAT_SEV, skip;
+	u64 cmd[CMDQ_ENT_DWORDS];
+	int idx, ret;
+	u32 space;
+
+	if (!is_cmdq_enabled(smmu))
+		return 0;
+
+	space = (1 << (smmu->cmdq_host.llq.max_n_shift)) - queue_space(&smmu->cmdq_host.llq);
+	/* Wait for the command queue to have some space. */
+	ret = smmu_wait(use_wfe, smmu_cmdq_has_space(&smmu->cmdq, space));
+	if (ret)
+		return ret;
+
+	while (space--) {
+		idx = Q_IDX(&smmu->cmdq_host.llq, smmu->cmdq_host.llq.cons);
+		queue_inc_cons(&smmu->cmdq_host.llq);
+
+		memcpy(cmd, &host_cmdq[idx * CMDQ_ENT_DWORDS], CMDQ_ENT_DWORDS << 3);
+		skip = smmu_filter_command(smmu, cmd);
+		if (WARN_ON(skip))
+			continue;
+		smmu_add_cmd_raw(smmu, cmd);
+	}
+
+	writel(smmu->cmdq.llq.prod, smmu->cmdq.prod_reg);
+
+	return smmu_wait(use_wfe, smmu_cmdq_empty(&smmu->cmdq));
+}
+
 static void smmu_emulate_cmdq_enable(struct hyp_arm_smmu_v3_device *smmu)
 {
 	u32 shift = smmu->cmdq_host.q_base & Q_BASE_LOG2SIZE;
@@ -388,18 +473,51 @@ static bool smmu_dabt_device(struct hyp_arm_smmu_v3_device *smmu,
 		/* Clear stage-2 support, hide MSI to avoid write back to cmdq */
 		mask = read_only & ~(IDR0_S2P | IDR0_VMID16 | IDR0_MSI | IDR0_HYP);
 		break;
-	/* Passthrough the register access for bisectiblity, handled later */
 	case ARM_SMMU_CMDQ_BASE:
+		/*
+		 * Although allowed to use smaller size, we rely on the SMMUv3 driver
+		 * using 64-bit store instruction for simplicity.
+		 */
+		if (len != sizeof(u64))
+			break;
 		if (is_write) {
 			/* Not allowed by the architecture */
 			if (WARN_ON(is_cmdq_enabled(smmu)))
 				break;
 			smmu->cmdq_host.q_base = val;
+			goto out_ret;
+		} else {
+			val = smmu->cmdq_host.q_base;
+			goto out_update_regs;
 		}
-		mask = read_write;
-		break;
 	case ARM_SMMU_CMDQ_PROD:
+		if (len != sizeof(u32))
+			break;
+		if (is_write) {
+			smmu->cmdq_host.llq.prod = val;
+			WARN_ON(smmu_emulate_cmdq_insert(smmu));
+			goto out_ret;
+		} else {
+			val = smmu->cmdq_host.llq.prod;
+			goto out_update_regs;
+		}
 	case ARM_SMMU_CMDQ_CONS:
+		if (len != sizeof(u32))
+			break;
+		if (is_write) {
+			if (WARN_ON(is_cmdq_enabled(smmu)))
+				break;
+
+			smmu->cmdq_host.llq.cons = val;
+			goto out_ret;
+		} else {
+			/* Propagate errors back to the host.*/
+			u32 cons = readl_relaxed(smmu->base + ARM_SMMU_CMDQ_CONS);
+
+			val = smmu->cmdq_host.llq.cons | (CMDQ_CONS_ERR & cons);
+			goto out_update_regs;
+		}
+	/* Passthrough the register access for bisectiblity, handled later */
 	case ARM_SMMU_STRTAB_BASE:
 	case ARM_SMMU_STRTAB_BASE_CFG:
 	case ARM_SMMU_GBPA:
@@ -495,6 +613,8 @@ static bool smmu_dabt_device(struct hyp_arm_smmu_v3_device *smmu,
 		val = readq_relaxed(smmu->base + off) & mask;
 	else
 		val = readl_relaxed(smmu->base + off) & mask;
+
+out_update_regs:
 	/*
 	 * Device might be read senstive, so do it but ignore writing
 	 * back for xzr.
-- 
2.54.0.545.g6539524ca2-goog


  parent reply	other threads:[~2026-05-01 11:20 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-01 11:19 [PATCH v6 00/25] KVM: arm64: SMMUv3 driver for pKVM (trap and emulate) Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 01/25] KVM: arm64: Generalize trace clock Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 02/25] KVM: arm64: Donate MMIO to the hypervisor Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 03/25] iommu/arm-smmu-v3: Split code with hyp Mostafa Saleh
2026-05-01 12:44   ` Jason Gunthorpe
2026-05-04 12:13     ` Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 04/25] iommu/arm-smmu-v3: Move TLB range invalidation into common code Mostafa Saleh
2026-05-01 12:41   ` Jason Gunthorpe
2026-05-04 12:15     ` Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 05/25] iommu/arm-smmu-v3: Move IDR parsing to common functions Mostafa Saleh
2026-05-01 12:47   ` Jason Gunthorpe
2026-05-04 12:16     ` Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 06/25] iommu/io-pgtable-arm: Rework to use the iommu-pages API Mostafa Saleh
2026-05-01 12:24   ` Jason Gunthorpe
2026-05-04 12:19     ` Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 07/25] KVM: arm64: iommu: Introduce IOMMU driver infrastructure Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 08/25] KVM: arm64: iommu: Shadow host stage-2 page table Mostafa Saleh
2026-05-01 13:00   ` Jason Gunthorpe
2026-05-04 12:28     ` Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 09/25] KVM: arm64: iommu: Add memory pool Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 10/25] KVM: arm64: iommu: Support DABT for IOMMU Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 11/25] iommu/arm-smmu-v3-kvm: Add SMMUv3 driver Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 12/25] iommu/arm-smmu-v3-kvm: Add the kernel driver Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 13/25] iommu/arm-smmu-v3-kvm: Probe SMMU HW Mostafa Saleh
2026-05-01 12:51   ` Jason Gunthorpe
2026-05-04 12:30     ` Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 14/25] iommu/arm-smmu-v3-kvm: Add MMIO emulation Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 15/25] iommu/arm-smmu-v3-kvm: Shadow the command queue Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 16/25] iommu/arm-smmu-v3-kvm: Add CMDQ functions Mostafa Saleh
2026-05-01 11:19 ` Mostafa Saleh [this message]
2026-05-01 11:19 ` [PATCH v6 18/25] iommu/arm-smmu-v3-kvm: Shadow stream table Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 19/25] iommu/arm-smmu-v3-kvm: Shadow STEs Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 20/25] iommu/arm-smmu-v3-kvm: Share other queues Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 21/25] iommu/arm-smmu-v3-kvm: Emulate GBPA Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 22/25] iommu/io-pgtable-arm: Support io-pgtable-arm in the hypervisor Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 23/25] iommu/arm-smmu-v3-kvm: Shadow the CPU stage-2 page table Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 24/25] iommu/arm-smmu-v3-kvm: Enable nesting Mostafa Saleh
2026-05-01 11:19 ` [PATCH v6 25/25] KVM: arm64: Add documentation for pKVM DMA isolation Mostafa Saleh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260501111928.259252-18-smostafa@google.com \
    --to=smostafa@google.com \
    --cc=catalin.marinas@arm.com \
    --cc=iommu@lists.linux.dev \
    --cc=jean-philippe@linaro.org \
    --cc=jgg@ziepe.ca \
    --cc=joey.gouly@arm.com \
    --cc=joro@8bytes.org \
    --cc=keirf@google.com \
    --cc=kvmarm@lists.linux.dev \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maz@kernel.org \
    --cc=oliver.upton@linux.dev \
    --cc=qperret@google.com \
    --cc=sebastianene@google.com \
    --cc=suzuki.poulose@arm.com \
    --cc=tabba@google.com \
    --cc=vdonnefort@google.com \
    --cc=will@kernel.org \
    --cc=yuzenghui@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox