[PATCH v4 1/5] dt-bindings: thermal: sun8i: Add A523 THS0/1 controllers

[Mikhail Kalashnikov <iuncuim@gmail.com>]

Add dt-bindings description of the thermal sensors in the A523 processor.
The controllers require activation of the additional frequency of the
associated gpadc controller, so a mod clock property required.

The calibration data is split into two cells that are in different areas
of nvmem. Both controllers require access to both memory cell, so a new
property nvmem-cells has been added. To maintain backward compatibility,
the name of the old cell remains the same and the new nvmem-cell-names is
called calibration-second-part

Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
---
 .../thermal/allwinner,sun8i-a83t-ths.yaml     | 54 +++++++++++++++++--
 1 file changed, 51 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 3e61689f6..6020413c3 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -24,6 +24,8 @@ properties:
       - allwinner,sun50i-h5-ths
       - allwinner,sun50i-h6-ths
       - allwinner,sun50i-h616-ths
+      - allwinner,sun55i-a523-ths0
+      - allwinner,sun55i-a523-ths1
 
   clocks:
     minItems: 1
@@ -47,11 +49,16 @@ properties:
     maxItems: 1
 
   nvmem-cells:
-    maxItems: 1
-    description: Calibration data for thermal sensors
+    minItems: 1
+    items:
+      - description: Calibration data for thermal sensors
+      - description: Additional cell in case of separate calibration data
 
   nvmem-cell-names:
-    const: calibration
+    minItems: 1
+    items:
+      - const: calibration
+      - const: calibration-second-part
 
   allwinner,sram:
     maxItems: 1
@@ -107,6 +114,7 @@ allOf:
             enum:
               - allwinner,sun8i-h3-ths
               - allwinner,sun20i-d1-ths
+              - allwinner,sun55i-a523-ths0
 
     then:
       properties:
@@ -132,6 +140,29 @@ allOf:
         - clock-names
         - resets
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun55i-a523-ths0
+              - allwinner,sun55i-a523-ths1
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        nvmem-cells:
+          minItems: 2
+        nvmem-cell-names:
+          minItems: 2
+    else:
+      properties:
+        nvmem-cells:
+          maxItems: 1
+        nvmem-cell-names:
+          items:
+            - const: calibration
+
 required:
   - compatible
   - reg
@@ -176,4 +207,21 @@ examples:
         #thermal-sensor-cells = <1>;
     };
 
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/sun55i-a523-ccu.h>
+    #include <dt-bindings/reset/sun55i-a523-ccu.h>
+
+    thermal-sensor@2009400 {
+      compatible = "allwinner,sun55i-a523-ths1";
+      reg = <0x02009400 0x400>;
+      interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_GPADC1>;
+      clock-names = "bus", "mod";
+      resets = <&ccu RST_BUS_THS>;
+      nvmem-cells = <&ths_calibration0>, <&ths_calibration1>;
+      nvmem-cell-names = "calibration",
+             "calibration-second-part";
+      #thermal-sensor-cells = <1>;
+    };
 ...
-- 
2.54.0