From: Thomas Weber <thomas.x.weber@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Linus Walleij <linusw@kernel.org>
Cc: Thomas Weber <thomas.weber@corscience.com>,
linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] pinctrl: qcom: Fix typo
Date: Tue, 5 May 2026 14:24:12 +0200 [thread overview]
Message-ID: <20260505122412.59208-1-thomas.weber@corscience.com> (raw)
STRENGH -> STRENGTH
Signed-off-by: Thomas Weber <thomas.weber@corscience.com>
---
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
index 5c966d51eda7..c42dd7c736fe 100644
--- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
@@ -53,7 +53,7 @@
#define PM8XXX_GPIO_PHYSICAL_OFFSET 1
/* custom pinconf parameters */
-#define PM8XXX_QCOM_DRIVE_STRENGH (PIN_CONFIG_END + 1)
+#define PM8XXX_QCOM_DRIVE_STRENGTH (PIN_CONFIG_END + 1)
#define PM8XXX_QCOM_PULL_UP_STRENGTH (PIN_CONFIG_END + 2)
/**
@@ -97,13 +97,13 @@ struct pm8xxx_gpio {
};
static const struct pinconf_generic_params pm8xxx_gpio_bindings[] = {
- {"qcom,drive-strength", PM8XXX_QCOM_DRIVE_STRENGH, 0},
+ {"qcom,drive-strength", PM8XXX_QCOM_DRIVE_STRENGTH, 0},
{"qcom,pull-up-strength", PM8XXX_QCOM_PULL_UP_STRENGTH, 0},
};
#ifdef CONFIG_DEBUG_FS
static const struct pin_config_item pm8xxx_conf_items[ARRAY_SIZE(pm8xxx_gpio_bindings)] = {
- PCONFDUMP(PM8XXX_QCOM_DRIVE_STRENGH, "drive-strength", NULL, true),
+ PCONFDUMP(PM8XXX_QCOM_DRIVE_STRENGTH, "drive-strength", NULL, true),
PCONFDUMP(PM8XXX_QCOM_PULL_UP_STRENGTH, "pull up strength", NULL, true),
};
#endif
@@ -291,7 +291,7 @@ static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
case PIN_CONFIG_POWER_SOURCE:
arg = pin->power_source;
break;
- case PM8XXX_QCOM_DRIVE_STRENGH:
+ case PM8XXX_QCOM_DRIVE_STRENGTH:
arg = pin->output_strength;
break;
case PIN_CONFIG_DRIVE_PUSH_PULL:
@@ -373,7 +373,7 @@ static int pm8xxx_pin_config_set(struct pinctrl_dev *pctldev,
pin->power_source = arg;
banks |= BIT(0);
break;
- case PM8XXX_QCOM_DRIVE_STRENGH:
+ case PM8XXX_QCOM_DRIVE_STRENGTH:
if (arg > PMIC_GPIO_STRENGTH_LOW) {
dev_err(pctrl->dev, "invalid drive strength\n");
return -EINVAL;
--
2.34.1
next reply other threads:[~2026-05-05 12:24 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-05 12:24 Thomas Weber [this message]
2026-05-05 12:29 ` [PATCH 1/2] pinctrl: qcom: Fix typo Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260505122412.59208-1-thomas.weber@corscience.com \
--to=thomas.x.weber@gmail.com \
--cc=andersson@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=thomas.weber@corscience.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox